Inter-revision diff: patch 2

Comparing v6 (message) to v12 (message)

--- v6
+++ v12
@@ -1,43 +1,173 @@
-This clears the TCE table when a container is being closed as this is
-a good thing to leave the table clean before passing the ownership
-back to the host kernel.
+The set_iommu_table_base_and_group() name suggests that the function
+sets table base and add a device to an IOMMU group.
+
+The actual purpose for table base setting is to put some reference
+into a device so later iommu_add_device() can get the IOMMU group
+reference and the device to the group.
+
+At the moment a group cannot be explicitly passed to iommu_add_device()
+as we want it to work from the bus notifier, we can fix it later and
+remove confusing calls of set_iommu_table_base().
+
+This replaces set_iommu_table_base_and_group() with a couple of
+set_iommu_table_base() + iommu_add_device() which makes reading the code
+easier.
+
+This adds few comments why set_iommu_table_base() and iommu_add_device()
+are called where they are called.
+
+For IODA1/2, this essentially removes iommu_add_device() call from
+the pnv_pci_ioda_dma_dev_setup() as it will always fail at this particular
+place:
+- for physical PE, the device is already attached by iommu_add_device()
+in pnv_pci_ioda_setup_dma_pe();
+- for virtual PE, the sysfs entries are not ready to create all symlinks
+so actual adding is happening in tce_iommu_bus_notifier.
 
 Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
+Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
+Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
 ---
- drivers/vfio/vfio_iommu_spapr_tce.c | 14 +++++++++++---
- 1 file changed, 11 insertions(+), 3 deletions(-)
+Changes:
+v10:
+* new to the series
+---
+ arch/powerpc/include/asm/iommu.h            |  7 -------
+ arch/powerpc/platforms/powernv/pci-ioda.c   | 27 +++++++++++++++++++++++----
+ arch/powerpc/platforms/powernv/pci-p5ioc2.c |  3 ++-
+ arch/powerpc/platforms/pseries/iommu.c      | 15 ++++++++-------
+ 4 files changed, 33 insertions(+), 19 deletions(-)
 
-diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c
-index 6c59339..756831f 100644
---- a/drivers/vfio/vfio_iommu_spapr_tce.c
-+++ b/drivers/vfio/vfio_iommu_spapr_tce.c
-@@ -134,16 +134,24 @@ static void *tce_iommu_open(unsigned long arg)
- 	return container;
+diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
+index 1e27d63..8353c86 100644
+--- a/arch/powerpc/include/asm/iommu.h
++++ b/arch/powerpc/include/asm/iommu.h
+@@ -140,13 +140,6 @@ static inline int __init tce_iommu_bus_notifier_init(void)
+ }
+ #endif /* !CONFIG_IOMMU_API */
+ 
+-static inline void set_iommu_table_base_and_group(struct device *dev,
+-						  void *base)
+-{
+-	set_iommu_table_base(dev, base);
+-	iommu_add_device(dev);
+-}
+-
+ extern int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl,
+ 			    struct scatterlist *sglist, int nelems,
+ 			    unsigned long mask,
+diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
+index 2f092bb..9a77f3c 100644
+--- a/arch/powerpc/platforms/powernv/pci-ioda.c
++++ b/arch/powerpc/platforms/powernv/pci-ioda.c
+@@ -1598,7 +1598,13 @@ static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev
+ 
+ 	pe = &phb->ioda.pe_array[pdn->pe_number];
+ 	WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops);
+-	set_iommu_table_base_and_group(&pdev->dev, pe->tce32_table);
++	set_iommu_table_base(&pdev->dev, pe->tce32_table);
++	/*
++	 * Note: iommu_add_device() will fail here as
++	 * for physical PE: the device is already added by now;
++	 * for virtual PE: sysfs entries are not ready yet and
++	 * tce_iommu_bus_notifier will add the device to a group later.
++	 */
  }
  
-+static int tce_iommu_clear(struct tce_container *container,
-+		struct iommu_table *tbl,
-+		unsigned long entry, unsigned long pages);
-+
- static void tce_iommu_release(void *iommu_data)
- {
- 	struct tce_container *container = iommu_data;
-+	struct iommu_table *tbl = container->tbl;
+ static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb,
+@@ -1659,7 +1665,8 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe,
+ 	struct pci_dev *dev;
  
--	WARN_ON(container->tbl && !container->tbl->it_group);
-+	WARN_ON(tbl && !tbl->it_group);
- 	tce_iommu_disable(container);
+ 	list_for_each_entry(dev, &bus->devices, bus_list) {
+-		set_iommu_table_base_and_group(&dev->dev, pe->tce32_table);
++		set_iommu_table_base(&dev->dev, pe->tce32_table);
++		iommu_add_device(&dev->dev);
  
--	if (container->tbl && container->tbl->it_group)
--		tce_iommu_detach_group(iommu_data, container->tbl->it_group);
-+	if (tbl) {
-+		tce_iommu_clear(container, tbl,	tbl->it_offset, tbl->it_size);
+ 		if (dev->subordinate)
+ 			pnv_ioda_setup_bus_dma(pe, dev->subordinate);
+@@ -1835,7 +1842,13 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
+ 	if (pe->flags & PNV_IODA_PE_DEV) {
+ 		iommu_register_group(tbl, phb->hose->global_number,
+ 				     pe->pe_number);
+-		set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
++		/*
++		 * Setting table base here only for carrying iommu_group
++		 * further down to let iommu_add_device() do the job.
++		 * pnv_pci_ioda_dma_dev_setup will override it later anyway.
++		 */
++		set_iommu_table_base(&pe->pdev->dev, tbl);
++		iommu_add_device(&pe->pdev->dev);
+ 	} else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)) {
+ 		iommu_register_group(tbl, phb->hose->global_number,
+ 				     pe->pe_number);
+@@ -1963,7 +1976,13 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
+ 	if (pe->flags & PNV_IODA_PE_DEV) {
+ 		iommu_register_group(tbl, phb->hose->global_number,
+ 				     pe->pe_number);
+-		set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
++		/*
++		 * Setting table base here only for carrying iommu_group
++		 * further down to let iommu_add_device() do the job.
++		 * pnv_pci_ioda_dma_dev_setup will override it later anyway.
++		 */
++		set_iommu_table_base(&pe->pdev->dev, tbl);
++		iommu_add_device(&pe->pdev->dev);
+ 	} else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)) {
+ 		iommu_register_group(tbl, phb->hose->global_number,
+ 				     pe->pe_number);
+diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
+index 4729ca7..b17d93615 100644
+--- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c
++++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
+@@ -92,7 +92,8 @@ static void pnv_pci_p5ioc2_dma_dev_setup(struct pnv_phb *phb,
+ 				pci_domain_nr(phb->hose->bus), phb->opal_id);
+ 	}
  
-+		if (tbl->it_group)
-+			tce_iommu_detach_group(iommu_data, tbl->it_group);
-+	}
- 	mutex_destroy(&container->lock);
+-	set_iommu_table_base_and_group(&pdev->dev, &phb->p5ioc2.iommu_table);
++	set_iommu_table_base(&pdev->dev, &phb->p5ioc2.iommu_table);
++	iommu_add_device(&pdev->dev);
+ }
  
- 	kfree(container);
+ static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, u64 hub_id,
+diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
+index 61d5a17..05ab06d 100644
+--- a/arch/powerpc/platforms/pseries/iommu.c
++++ b/arch/powerpc/platforms/pseries/iommu.c
+@@ -688,8 +688,8 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev)
+ 		iommu_table_setparms(phb, dn, tbl);
+ 		PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node);
+ 		iommu_register_group(tbl, pci_domain_nr(phb->bus), 0);
+-		set_iommu_table_base_and_group(&dev->dev,
+-					       PCI_DN(dn)->iommu_table);
++		set_iommu_table_base(&dev->dev, tbl);
++		iommu_add_device(&dev->dev);
+ 		return;
+ 	}
+ 
+@@ -700,10 +700,10 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev)
+ 	while (dn && PCI_DN(dn) && PCI_DN(dn)->iommu_table == NULL)
+ 		dn = dn->parent;
+ 
+-	if (dn && PCI_DN(dn))
+-		set_iommu_table_base_and_group(&dev->dev,
+-					       PCI_DN(dn)->iommu_table);
+-	else
++	if (dn && PCI_DN(dn)) {
++		set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table);
++		iommu_add_device(&dev->dev);
++	} else
+ 		printk(KERN_WARNING "iommu: Device %s has no iommu table\n",
+ 		       pci_name(dev));
+ }
+@@ -1115,7 +1115,8 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
+ 		pr_debug("  found DMA window, table: %p\n", pci->iommu_table);
+ 	}
+ 
+-	set_iommu_table_base_and_group(&dev->dev, pci->iommu_table);
++	set_iommu_table_base(&dev->dev, pci->iommu_table);
++	iommu_add_device(&dev->dev);
+ }
+ 
+ static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask)
 -- 
-2.0.0
+2.4.0.rc3.8.gfb3e7d5
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help