Inter-revision diff: patch 2

Comparing v10 (message) to v4 (message)

--- v10
+++ v4
@@ -1,172 +1,43 @@
-The set_iommu_table_base_and_group() name suggests that the function
-sets table base and add a device to an IOMMU group. However actual
-table base setting happens in pnv_pci_ioda_dma_dev_setup().
-
-The actual purpose for table base setting is to put some reference
-into a device so later iommu_add_device() can get the IOMMU group
-reference and the device to the group.
-
-At the moment a group cannot be explicitly passed to iommu_add_device()
-as we want it to work from the bus notifier, we can fix it later and
-remove confusing calls of set_iommu_table_base().
-
-This replaces set_iommu_table_base_and_group() with a couple of
-set_iommu_table_base() + iommu_add_device() which makes reading the code
-easier.
-
-This adds few comments why set_iommu_table_base() and iommu_add_device()
-are called where they are called.
-
-For IODA1/2, this essentially removes iommu_add_device() call from
-the pnv_pci_ioda_dma_dev_setup() as it will always fail at this particular
-place:
-- for physical PE, the device is already attached by iommu_add_device()
-in pnv_pci_ioda_setup_dma_pe();
-- for virtual PE, the sysfs entries are not ready to create all symlinks
-so actual adding is happening in tce_iommu_bus_notifier.
+This clears the TCE table when a container is being closed as this is
+a good thing to leave the table clean before passing the ownership
+back to the host kernel.
 
 Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
 ---
-Changes:
-v10:
-* new to the series
----
- arch/powerpc/include/asm/iommu.h            |  7 -------
- arch/powerpc/platforms/powernv/pci-ioda.c   | 27 +++++++++++++++++++++++----
- arch/powerpc/platforms/powernv/pci-p5ioc2.c |  3 ++-
- arch/powerpc/platforms/pseries/iommu.c      | 15 ++++++++-------
- 4 files changed, 33 insertions(+), 19 deletions(-)
+ drivers/vfio/vfio_iommu_spapr_tce.c | 14 +++++++++++---
+ 1 file changed, 11 insertions(+), 3 deletions(-)
 
-diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
-index 1e27d63..8353c86 100644
---- a/arch/powerpc/include/asm/iommu.h
-+++ b/arch/powerpc/include/asm/iommu.h
-@@ -140,13 +140,6 @@ static inline int __init tce_iommu_bus_notifier_init(void)
- }
- #endif /* !CONFIG_IOMMU_API */
- 
--static inline void set_iommu_table_base_and_group(struct device *dev,
--						  void *base)
--{
--	set_iommu_table_base(dev, base);
--	iommu_add_device(dev);
--}
--
- extern int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl,
- 			    struct scatterlist *sglist, int nelems,
- 			    unsigned long mask,
-diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
-index 2f092bb..9a77f3c 100644
---- a/arch/powerpc/platforms/powernv/pci-ioda.c
-+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
-@@ -1598,7 +1598,13 @@ static void pnv_pci_ioda_dma_dev_setup(struct pnv_phb *phb, struct pci_dev *pdev
- 
- 	pe = &phb->ioda.pe_array[pdn->pe_number];
- 	WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops);
--	set_iommu_table_base_and_group(&pdev->dev, pe->tce32_table);
-+	set_iommu_table_base(&pdev->dev, pe->tce32_table);
-+	/*
-+	 * Note: iommu_add_device() will fail here as
-+	 * for physical PE: the device is already added by now;
-+	 * for virtual PE: sysfs entries are not ready yet and
-+	 * tce_iommu_bus_notifier will add the device to a group later.
-+	 */
+diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c
+index 1ef46c3..daf2e2c 100644
+--- a/drivers/vfio/vfio_iommu_spapr_tce.c
++++ b/drivers/vfio/vfio_iommu_spapr_tce.c
+@@ -134,16 +134,24 @@ static void *tce_iommu_open(unsigned long arg)
+ 	return container;
  }
  
- static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb,
-@@ -1659,7 +1665,8 @@ static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe,
- 	struct pci_dev *dev;
++static int tce_iommu_clear(struct tce_container *container,
++		struct iommu_table *tbl,
++		unsigned long entry, unsigned long pages);
++
+ static void tce_iommu_release(void *iommu_data)
+ {
+ 	struct tce_container *container = iommu_data;
++	struct iommu_table *tbl = container->tbl;
  
- 	list_for_each_entry(dev, &bus->devices, bus_list) {
--		set_iommu_table_base_and_group(&dev->dev, pe->tce32_table);
-+		set_iommu_table_base(&dev->dev, pe->tce32_table);
-+		iommu_add_device(&dev->dev);
+-	WARN_ON(container->tbl && !container->tbl->it_group);
++	WARN_ON(tbl && !tbl->it_group);
+ 	tce_iommu_disable(container);
  
- 		if (dev->subordinate)
- 			pnv_ioda_setup_bus_dma(pe, dev->subordinate);
-@@ -1835,7 +1842,13 @@ static void pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
- 	if (pe->flags & PNV_IODA_PE_DEV) {
- 		iommu_register_group(tbl, phb->hose->global_number,
- 				     pe->pe_number);
--		set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
-+		/*
-+		 * Setting table base here only for carrying iommu_group
-+		 * further down to let iommu_add_device() do the job.
-+		 * pnv_pci_ioda_dma_dev_setup will override it later anyway.
-+		 */
-+		set_iommu_table_base(&pe->pdev->dev, tbl);
-+		iommu_add_device(&pe->pdev->dev);
- 	} else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)) {
- 		iommu_register_group(tbl, phb->hose->global_number,
- 				     pe->pe_number);
-@@ -1963,7 +1976,13 @@ static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
- 	if (pe->flags & PNV_IODA_PE_DEV) {
- 		iommu_register_group(tbl, phb->hose->global_number,
- 				     pe->pe_number);
--		set_iommu_table_base_and_group(&pe->pdev->dev, tbl);
-+		/*
-+		 * Setting table base here only for carrying iommu_group
-+		 * further down to let iommu_add_device() do the job.
-+		 * pnv_pci_ioda_dma_dev_setup will override it later anyway.
-+		 */
-+		set_iommu_table_base(&pe->pdev->dev, tbl);
-+		iommu_add_device(&pe->pdev->dev);
- 	} else if (pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)) {
- 		iommu_register_group(tbl, phb->hose->global_number,
- 				     pe->pe_number);
-diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
-index 4729ca7..b17d93615 100644
---- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c
-+++ b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
-@@ -92,7 +92,8 @@ static void pnv_pci_p5ioc2_dma_dev_setup(struct pnv_phb *phb,
- 				pci_domain_nr(phb->hose->bus), phb->opal_id);
- 	}
+-	if (container->tbl && container->tbl->it_group)
+-		tce_iommu_detach_group(iommu_data, container->tbl->it_group);
++	if (tbl) {
++		tce_iommu_clear(container, tbl,	tbl->it_offset, tbl->it_size);
  
--	set_iommu_table_base_and_group(&pdev->dev, &phb->p5ioc2.iommu_table);
-+	set_iommu_table_base(&pdev->dev, &phb->p5ioc2.iommu_table);
-+	iommu_add_device(&pdev->dev);
- }
++		if (tbl->it_group)
++			tce_iommu_detach_group(iommu_data, tbl->it_group);
++	}
+ 	mutex_destroy(&container->lock);
  
- static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, u64 hub_id,
-diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
-index 61d5a17..05ab06d 100644
---- a/arch/powerpc/platforms/pseries/iommu.c
-+++ b/arch/powerpc/platforms/pseries/iommu.c
-@@ -688,8 +688,8 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev)
- 		iommu_table_setparms(phb, dn, tbl);
- 		PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node);
- 		iommu_register_group(tbl, pci_domain_nr(phb->bus), 0);
--		set_iommu_table_base_and_group(&dev->dev,
--					       PCI_DN(dn)->iommu_table);
-+		set_iommu_table_base(&dev->dev, tbl);
-+		iommu_add_device(&dev->dev);
- 		return;
- 	}
- 
-@@ -700,10 +700,10 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev)
- 	while (dn && PCI_DN(dn) && PCI_DN(dn)->iommu_table == NULL)
- 		dn = dn->parent;
- 
--	if (dn && PCI_DN(dn))
--		set_iommu_table_base_and_group(&dev->dev,
--					       PCI_DN(dn)->iommu_table);
--	else
-+	if (dn && PCI_DN(dn)) {
-+		set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table);
-+		iommu_add_device(&dev->dev);
-+	} else
- 		printk(KERN_WARNING "iommu: Device %s has no iommu table\n",
- 		       pci_name(dev));
- }
-@@ -1115,7 +1115,8 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev)
- 		pr_debug("  found DMA window, table: %p\n", pci->iommu_table);
- 	}
- 
--	set_iommu_table_base_and_group(&dev->dev, pci->iommu_table);
-+	set_iommu_table_base(&dev->dev, pci->iommu_table);
-+	iommu_add_device(&dev->dev);
- }
- 
- static int dma_set_mask_pSeriesLP(struct device *dev, u64 dma_mask)
+ 	kfree(container);
 -- 
-2.4.0.rc3.8.gfb3e7d5
+2.0.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help