# \[PATCH\] powerpc/pasemi: Defer Nemo IRQ initialization

- From: Christian Zigotzky \<hidden\>
- Date: 2026-10-28 03:54:27 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2026/10/17814585
- Thread: https://ratatoskr.run/linuxppc-dev/2026/10/17797378/t.md

```text
Hi all,

I have created a new patch. I hope it is OK. It works without any problems.

Thanks,
Christian

On 24/10/26 09:55, chzigotzky@xenosoft.de wrote:
> From: Christian Zigotzky A-EON Open Source <redacted>
>
> Since pas_pci_init() is now called later during boot, the i8259
> initialization in pas_init_IRQ() happens too early and accesses
> registers that are not yet mapped, preventing the board from booting.
>
> Move the Nemo-specific i8259 initialization to pas_add_bridge(),
> after the ISA bridge has been discovered.
>
> Suggested-by: Darren Stevens <redacted>
> Tested-by: Christian Zigotzky <redacted>
> Signed-off-by: Christian Zigotzky A-EON Open Source <redacted>
> ---
>   arch/powerpc/platforms/pasemi/pasemi.h |  6 ++++++
>   arch/powerpc/platforms/pasemi/pci.c    |  5 +++++
>   arch/powerpc/platforms/pasemi/setup.c  | 12 ++++--------
>   3 files changed, 15 insertions(+), 8 deletions(-)
>
> diff --git a/arch/powerpc/platforms/pasemi/pasemi.h b/arch/powerpc/platforms/pasemi/pasemi.h
> index 6f6743b8e48d..01bcfa258625 100644
> --- a/arch/powerpc/platforms/pasemi/pasemi.h
> +++ b/arch/powerpc/platforms/pasemi/pasemi.h
> @@ -7,6 +7,12 @@ extern void pas_pci_init(void);
>   struct pci_dev;
>   extern void pas_pci_dma_dev_setup(struct pci_dev *dev);
>   
> +#ifdef CONFIG_PPC_PASEMI_NEMO
> +void __init nemo_init_IRQ(void);
> +#else
> +static inline void __init nemo_init_IRQ(void) { }
> +#endif
> +
>   void __iomem *__init pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset);
>   
>   extern void __init pasemi_map_registers(void);
> diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
> index 2df955274652..fb53782da7ec 100644
> --- a/arch/powerpc/platforms/pasemi/pci.c
> +++ b/arch/powerpc/platforms/pasemi/pci.c
> @@ -265,6 +265,11 @@ static int __init pas_add_bridge(struct device_node *dev)
>   	 */
>   	isa_bridge_find_early(hose);
>   
> +	/*
> +	 * ISA bridge is now active, add the i8259 cascade (if needed)
> +	 */
> +	nemo_init_IRQ();
> +
>   	return 0;
>   }
>   
> diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
> index 45792ecd5dfd..7a961f2a228f 100644
> --- a/arch/powerpc/platforms/pasemi/setup.c
> +++ b/arch/powerpc/platforms/pasemi/setup.c
> @@ -216,10 +216,12 @@ static void sb600_8259_cascade(struct irq_desc *desc)
>   	chip->irq_eoi(&desc->irq_data);
>   }
>   
> -static void __init nemo_init_IRQ(struct mpic *mpic)
> +void __init nemo_init_IRQ(void)
>   {
>   	struct device_node *np;
>   	int gpio_virq;
> +	struct mpic *mpic;
> +
>   	/* Connect the SB600's legacy i8259 controller */
>   	np = of_find_node_by_path("/pxp@0,e0000000");
>   	i8259_init(np, 0);
> @@ -230,14 +232,10 @@ static void __init nemo_init_IRQ(struct mpic *mpic)
>   	irq_set_chained_handler(gpio_virq, sb600_8259_cascade);
>   	mpic_unmask_irq(irq_get_irq_data(gpio_virq));
>   
> +	mpic = irq_get_chip_data(gpio_virq);
>   	irq_set_default_domain(mpic->irqhost);
>   }
>   
> -#else
> -
> -static inline void nemo_init_IRQ(struct mpic *mpic)
> -{
> -}
>   #endif
>   
>   static __init void pas_init_IRQ(void)
> @@ -300,8 +298,6 @@ static __init void pas_init_IRQ(void)
>   		mpic_unmask_irq(irq_get_irq_data(nmi_virq));
>   	}
>   
> -	nemo_init_IRQ(mpic);
> -
>   	of_node_put(mpic_node);
>   	of_node_put(root);
>   }


-- 
Sent with BrassMonkey 35.0.2 (https://github.com/chzigotzky/Web-Browsers-and-Suites-for-Linux-PPC/releases/tag/BrassMonkey_35.0.2)


```