# Re: \[PATCH v2 8/8\] powerpc: Enable Generic Entry/Exit for syscalls.

- From: Christophe Leroy (CS GROUP) \<chleroy@kernel.org\>
- Date: 2025-12-16 06:41:23 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2025/12/3334799
- Thread: https://ratatoskr.run/linuxppc-dev/2025/12/3332757/t.md

```text


Le 14/12/2025 à 14:02, Mukesh Kumar Chaurasiya a écrit :
> From: Mukesh Kumar Chaurasiya <redacted>
>
> Convert the PowerPC syscall entry and exit paths to use the generic
> entry/exit framework by selecting GENERIC_ENTRY and integrating with
> the common syscall handling routines.
>
> This change transitions PowerPC away from its custom syscall entry and
> exit code to use the generic helpers such as:
>   - syscall_enter_from_user_mode()
>   - syscall_exit_to_user_mode()
>
> As part of this migration:
>   - The architecture now selects GENERIC_ENTRY in Kconfig.
>   - Old tracing, seccomp, and audit handling in ptrace.c is removed in
>     favor of generic entry infrastructure.
>   - interrupt.c and syscall.c are simplified to delegate context
>     management and user exit handling to the generic entry path.
>   - The new pt_regs field `exit_flags` introduced earlier is now used
>     to carry per-syscall exit state flags (e.g. _TIF_RESTOREALL).
>
> This aligns PowerPC with the common entry code used by other
> architectures and reduces duplicated logic around syscall tracing,
> context tracking, and signal handling.
>
> The performance benchmarks from perf bench basic syscall are below:
>
> perf bench syscall usec/op
>
> | Test            | With Patch | Without Patch | % Change |
> | --------------- | ---------- | ------------- | -------- |
> | getppid usec/op | 0.207795   | 0.210373      | -1.22%   |
> | getpgid usec/op | 0.206282   | 0.211676      | -2.55%   |
> | fork usec/op    | 833.986    | 814.809       | +2.35%   |
> | execve usec/op  | 360.939    | 365.168       | -1.16%   |
>
> perf bench syscall ops/sec
>
> | Test            | With Patch | Without Patch | % Change |
> | --------------- | ---------- | ------------- | -------- |
> | getppid ops/sec | 48,12,433  | 47,53,459     | +1.24%   |
> | getpgid ops/sec | 48,47,744  | 47,24,192     | +2.61%   |
> | fork ops/sec    | 1,199      | 1,227         | -2.28%   |
> | execve ops/sec  | 2,770      | 2,738         | +1.16%   |

I get about 2% degradation on powerpc 8xx, and it is quite stable over time when repeating the test.

'perf bench syscall all' on powerpc 8xx (usec per op):

| Test            | With Patch | Without Patch | % Change |
| --------------- | ---------- | ------------- | -------- |
| getppid usec/op | 2.63       | 2.63          | ~ 0%     |
| getpgid usec/op | 2.26       | 2.22          | +2,80%   |
| fork usec/op    | 15300      | 15000         | +2,00%   |
| execve usec/op  | 45700      | 45200         | +1.10%   |

Christophe

```
