# \[PATCH v4 1/4\] dt-bindings: mtd: raw-nand-chip: Relax node name pattern

- From: J. Neuschäfer via B4 Relay \<devnull+j.ne.posteo.net@kernel.org\>
- Date: 2025-03-13 21:35:47 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2025/03/2970868
- Thread: https://ratatoskr.run/linux-devicetree/2025/03/2970870/t.md

```text
From: "J. Neuschäfer" <redacted>

In some scenarios, such as under the Freescale eLBC bus, there are raw
NAND chips with a unit address that has a comma in it (cs,offset).
For reasons of compatibility with historical device trees and
readability of the unit addresses, this format is kept.

Relax the $nodename pattern in raw-nand-chip.yaml to allow such unit
addresses. Unfortunately $nonenames defined in bindings that reference
raw-nand

Signed-off-by: J. Neuschäfer <redacted>
---

V4:
- reintroduce patch to silence dtc validation error, after discussion
  with Rob Herring and Miquèl Raynal
- add some more detail to the commit message
- remove unit address format rather than extending it
  (old pattern: "^nand@[a-f0-9](,[0-9a-f]*)?$")

V3:
- remove patch after discussion with Miquèl Raynal

V2:
- new patch
---
 Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml
index 092448d7bfc5ccd246ca4b2341464e18722a2d51..d655f6673fc31b1d9ee7cd734cbe1d310f88090b 100644
--- a/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml
+++ b/Documentation/devicetree/bindings/mtd/raw-nand-chip.yaml
@@ -25,7 +25,7 @@ description: |
 
 properties:
   $nodename:
-    pattern: "^nand@[a-f0-9]$"
+    pattern: "^nand@"
 
   reg:
     description:

-- 
2.48.0.rc1.219.gb6b6757d772



```
