# Re: \[PATCH v2 13/15\] powerpc/rtas: Use fsleep() to minimize additional sleep duration

- From: Frederic Weisbecker \<frederic@kernel.org\>
- Date: 2024-10-09 16:20:32 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2024/10/2775601
- Thread: https://ratatoskr.run/linuxppc-dev/2024/09/2743805/t.md

```text
Le Wed, Sep 11, 2024 at 07:13:39AM +0200, Anna-Maria Behnsen a écrit :
> When commit 38f7b7067dae ("powerpc/rtas: rtas_busy_delay() improvements")
> was introduced, documentation about proper usage of sleep realted functions

related*

> was outdated.
> 
> The commit message references the usage of a HZ=100 system. When using a
> 20ms sleep duration on such a system and therefore using msleep(), the
> possible additional slack will be +10ms.
> 
> When the system is configured with HZ=100 the granularity of a jiffy and of
> a bucket of the lowest timer wheel level is 10ms. To make sure a timer will
> not expire early (when queueing of the timer races with an concurrent
> update of jiffies), timers are always queued into the next bucket. This is
> the reason for the maximal possible slack of 10ms.
> 
> fsleep() limits the maximal possible slack to 25% by making threshold
> between usleep_range() and msleep() HZ dependent. As soon as the accuracy
> of msleep() is sufficient, the less expensive timer list timer based
> sleeping function is used instead of the more expensive hrtimer based
> usleep_range() function. The udelay() will not be used in this specific
> usecase as the lowest sleep length is larger than 1 microsecond.

Isn't udelay() for everything below 10us ?

> 
> Use fsleep() directly instead of using an own heuristic for the best
> sleeping mechanism to use..
> 
> Cc: Michael Ellerman <mpe@ellerman.id.au>
> Cc: Nathan Lynch <redacted>
> Cc: <redacted>
> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)

Reviewed-by: Frederic Weisbecker <frederic@kernel.org>

```
