# Re: \[PATCH v2 6/6\] watchdog/hardlockup: Define HARDLOCKUP\_DETECTOR\_ARCH

- From: Guenter Roeck \<linux@roeck-us.net\>
- Date: 2023-07-02 03:03:42 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2023/07/2251692
- Thread: https://ratatoskr.run/linux-perf-users/2023/06/2236734/t.md

```text
On 7/1/23 09:08, Doug Anderson wrote:
> Hi,
>
> On Sat, Jul 1, 2023 at 7:40 AM Guenter Roeck [ref] wrote:
>>
>> On Fri, Jun 16, 2023 at 05:06:18PM +0200, Petr Mladek wrote:
>>> The HAVE_ prefix means that the code could be enabled. Add another
>>> variable for HAVE_HARDLOCKUP_DETECTOR_ARCH without this prefix.
>>> It will be set when it should be built. It will make it compatible
>>> with the other hardlockup detectors.
>>>
>>> The change allows to clean up dependencies of PPC_WATCHDOG
>>> and HAVE_HARDLOCKUP_DETECTOR_PERF definitions for powerpc.
>>>
>>> As a result HAVE_HARDLOCKUP_DETECTOR_PERF has the same dependencies
>>> on arm, x86, powerpc architectures.
>>>
>>> Signed-off-by: Petr Mladek <pmladek@suse.com>
>>> Reviewed-by: Douglas Anderson <dianders@chromium.org>
>>> ---
>> ...
>>> --- a/include/linux/nmi.h
>>> +++ b/include/linux/nmi.h
>>> @@ -9,7 +9,7 @@
>>>   #include <asm/irq.h>
>>>
>>>   /* Arch specific watchdogs might need to share extra watchdog-related APIs. */
>>> -#if defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
>>> +#if defined(CONFIG_HARDLOCKUP_DETECTOR_ARCH) || defined(CONFIG_HARDLOCKUP_DETECTOR_SPARC64)
>>
>> This results in:
>>
>> arch/powerpc/platforms/pseries/mobility.c: In function 'pseries_migrate_partition':
>> arch/powerpc/platforms/pseries/mobility.c:753:17: error: implicit declaration of function 'watchdog_hardlockup_set_timeout_pct'; did you mean 'watchdog_hardlockup_stop'? [-Werror=implicit-function-declaration]
>>    753 |                 watchdog_hardlockup_set_timeout_pct(factor);
>>
>> with ppc64_defconfig -CONFIG_HARDLOCKUP_DETECTOR, because the dummy
>> for watchdog_hardlockup_set_timeout_pct() is still defined in
>> arch/powerpc/include/asm/nmi.h which is no longer included.
>
> Can you test with:
>
> https://lore.kernel.org/r/20230629124500.1.I55e2f4e7903d686c4484cb23c033c6a9e1a9d4c4@changeid
>

Sorry for the noise. I didn't find that one.

Yes, that should work. It is a bit odd that including both linux/nmi.h
and asm/nmi.h is required, but as it turns out that is actually quite common.

Thanks,
Guenter


```