# Re: \[PATCH v2 0/9\] Introduce SMT level and add PowerPC support

- From: Laurent Dufour \<hidden\>
- Date: 2023-06-29 12:04:46 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2023/06/2249659
- Thread: https://ratatoskr.run/linuxppc-dev/2023/06/2248419/t.md

```text


Le 29/06/2023 à 13:10, Michael Ellerman a écrit :
> Sachin Sant [ref] writes:
>>> On 28-Jun-2023, at 3:35 PM, Laurent Dufour [ref] wrote:
>>>
>>> I'm taking over the series Michael sent previously [1] which is smartly
>>> reviewing the initial series I sent [2].  This series is addressing the
>>> comments sent by Thomas and me on the Michael's one.
>>>
>>> Here is a short introduction to the issue this series is addressing:
>>>
>>> When a new CPU is added, the kernel is activating all its threads. This
>>> leads to weird, but functional, result when adding CPU on a SMT 4 system
>>> for instance.
>>>
>>> Here the newly added CPU 1 has 8 threads while the other one has 4 threads
>>> active (system has been booted with the 'smt-enabled=4' kernel option):
>>>
>>> ltcden3-lp12:~ # ppc64_cpu --info
>>> Core   0:    0*    1*    2*    3*    4     5     6     7
>>> Core   1:    8*    9*   10*   11*   12*   13*   14*   15*
>>>
>>> This mixed SMT level may confused end users and/or some applications.
>>>
>>
>> Thanks for the patches Laurent.
>>
>> Is the SMT level retained even when dynamically changing SMT values?
>> I am observing difference in behaviour with and without smt-enabled
>> kernel command line option.
>>
>> When smt-enabled= option is specified SMT level is retained across
>> cpu core remove and add.
>>
>> Without this option but changing SMT level during runtime using
>> ppc64_cpu —smt=<level>, the SMT level is not retained after
>> cpu core add.
>
> That's because ppc64_cpu is not using the sysfs SMT control file, it's
> just onlining/offlining threads manually.
>
> If you run:
>   $ ppc64_cpu --smt=4
>
> And then also do:
>
>   $ echo 4 > /sys/devices/system/cpu/smt/control
>
> It should work as expected?
>
> ppc64_cpu will need to be updated to do that automatically.

Hi Sachin and Michael,

Yes, ppc64_cpu will need an update, and I have a patch ready to be sent once this series will be accepted.

By the way, I've a fix for the build issue reported against the patch 6/9. I'll send a v3 soon.

Cheers,

Laurent.
```
