[PATCH] powerpc/interrupt: Don't read MSR from interrupt_exit_kernel_prepare()

A disassembly of interrupt_exit_kernel_prepare() shows a useless read
of MSR register. This is shown by r9 being re-used immediately without
doing anything with the value read.

  c000e0e0:       60 00 00 00     nop
  c000e0e4:       7d 3a c2 a6     mfmd_ap r9
  c000e0e8:       7d 20 00 a6     mfmsr   r9
  c000e0ec:       7c 51 13 a6     mtspr   81,r2
  c000e0f0:       81 3f 00 84     lwz     r9,132(r31)
  c000e0f4:       71 29 80 00     andi.   r9,r9,32768

This is due to the use of local_irq_save(). The flags read by
local_irq_save() are never used, use local_irq_disable() instead.

Fixes: 13799748b957 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Signed-off-by: Christophe Leroy <redacted>
---
 arch/powerpc/kernel/interrupt.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/interrupt.c b/arch/powerpc/kernel/interrupt.c
index e34c72285b4e..f3fc5fe919d9 100644
--- a/arch/powerpc/kernel/interrupt.c
+++ b/arch/powerpc/kernel/interrupt.c

@@ -368,7 +368,6 @@ void preempt_schedule_irq(void);
 
 notrace unsigned long interrupt_exit_kernel_prepare(struct pt_regs *regs)
 {
-	unsigned long flags;
 	unsigned long ret = 0;
 	unsigned long kuap;
 	bool stack_store = read_thread_flags() & _TIF_EMULATE_STACK_STORE;

@@ -392,7 +391,7 @@ notrace unsigned long interrupt_exit_kernel_prepare(struct pt_regs *regs)
 
 	kuap = kuap_get_and_assert_locked();
 
-	local_irq_save(flags);
+	local_irq_disable();
 
 	if (!arch_irq_disabled_regs(regs)) {
 		/* Returning to a kernel context with local irqs enabled. */

-- 
2.40.1

On Mon Jun 5, 2023 at 6:55 PM AEST, Christophe Leroy wrote:

A disassembly of interrupt_exit_kernel_prepare() shows a useless read
of MSR register. This is shown by r9 being re-used immediately without
doing anything with the value read.

  c000e0e0:       60 00 00 00     nop
  c000e0e4:       7d 3a c2 a6     mfmd_ap r9
  c000e0e8:       7d 20 00 a6     mfmsr   r9
  c000e0ec:       7c 51 13 a6     mtspr   81,r2
  c000e0f0:       81 3f 00 84     lwz     r9,132(r31)
  c000e0f4:       71 29 80 00     andi.   r9,r9,32768

This is due to the use of local_irq_save(). The flags read by
local_irq_save() are never used, use local_irq_disable() instead.

I did have a patch that warns if you do a local_irq_disable() when
irqs are disabled which is why I did this, but it is kind of silly.

You could do 'if (!irqs_disabled()) local_irq_disable()'

Unfortunately that adds another branch but if it is not taken
frequently then maybe avoiding the mtMSR/EID would make it a win?
If you don't change that I might end up doing it if I can get that
warning patch merged (needs a few core kernel changes).

I wonder how much that would help local_irq_save too, if interrupts
are already disabled then avoid the mt? Maybe those things are not
very costly on smaller in-order cores.

Reviewed-by: Nicholas Piggin <npiggin@gmail.com>

On Mon, 05 Jun 2023 10:55:26 +0200, Christophe Leroy wrote:

A disassembly of interrupt_exit_kernel_prepare() shows a useless read
of MSR register. This is shown by r9 being re-used immediately without
doing anything with the value read.

  c000e0e0:       60 00 00 00     nop
  c000e0e4:       7d 3a c2 a6     mfmd_ap r9
  c000e0e8:       7d 20 00 a6     mfmsr   r9
  c000e0ec:       7c 51 13 a6     mtspr   81,r2
  c000e0f0:       81 3f 00 84     lwz     r9,132(r31)
  c000e0f4:       71 29 80 00     andi.   r9,r9,32768

[...]

Applied to powerpc/next.

[1/1] powerpc/interrupt: Don't read MSR from interrupt_exit_kernel_prepare()
      https://git.kernel.org/powerpc/c/0eb089a72fda3f7969e6277804bde75dc1474a14

cheers