[PATCH 000/606] i2c: Complete conversion to i2c_probe_new

STALE1303d

39 messages, 13 authors, 2022-12-12 · open the first message on its own page

[PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Uwe Kleine-König <hidden>
Date: 2022-11-19 03:24:06

Hello,

since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

	https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/client_device_id_helper-immutable

I don't think it's feasable to apply this series in one go, so I ask the
maintainers of the changed files to apply via their tree. I guess it
will take a few kernel release iterations until all patch are in, but I
think a single tree creates too much conflicts.

The last patch changes i2c_driver::probe, all non-converted drivers will
fail to compile then. So I hope the build bots will tell me about any
driver I missed to convert. This patch is obviously not for application
now.

I dropped most individuals from the recipents of this mail to not
challenge the mail servers and mailing list filters too much. Sorry if
you had extra efforts to find this mail.

Best regards
Uwe

Uwe Kleine-König (606):
  tpm: st33zp24: Convert to Convert to i2c's .probe_new()
  tpm: tpm_i2c_atmel: Convert to i2c's .probe_new()
  tpm: tpm_i2c_infineon: Convert to i2c's .probe_new()
  tpm: tpm_i2c_nuvoton: Convert to i2c's .probe_new()
  tpm: tis_i2c: Convert to i2c's .probe_new()
  crypto: atmel-ecc - Convert to i2c's .probe_new()
  crypto: atmel-sha204a - Convert to i2c's .probe_new()
  extcon: fsa9480: Convert to i2c's .probe_new()
  extcon: rt8973: Convert to i2c's .probe_new()
  extcon: usbc-tusb320: Convert to i2c's .probe_new()
  gpio: max732x: Convert to i2c's .probe_new()
  gpio: pca953x: Convert to i2c's .probe_new()
  gpio: pcf857x: Convert to i2c's .probe_new()
  drm/bridge: adv7511: Convert to i2c's .probe_new()
  drm/bridge/analogix/anx6345: Convert to i2c's .probe_new()
  drm/bridge/analogix/anx78xx: Convert to i2c's .probe_new()
  drm/bridge: anx7625: Convert to i2c's .probe_new()
  drm/bridge: icn6211: Convert to i2c's .probe_new()
  drm/bridge: chrontel-ch7033: Convert to i2c's .probe_new()
  drm/bridge: it6505: Convert to i2c's .probe_new()
  drm/bridge: it66121: Convert to i2c's .probe_new()
  drm/bridge: lt8912b: Convert to i2c's .probe_new()
  drm/bridge: lt9211: Convert to i2c's .probe_new()
  drm/bridge: lt9611: Convert to i2c's .probe_new()
  drm/bridge: lt9611uxc: Convert to i2c's .probe_new()
  drm/bridge: megachips: Convert to i2c's .probe_new()
  drm/bridge: nxp-ptn3460: Convert to i2c's .probe_new()
  drm/bridge: parade-ps8622: Convert to i2c's .probe_new()
  drm/bridge: sii902x: Convert to i2c's .probe_new()
  drm/bridge: sii9234: Convert to i2c's .probe_new()
  drm/bridge: sii8620: Convert to i2c's .probe_new()
  drm/bridge: tc358767: Convert to i2c's .probe_new()
  drm/bridge: tc358768: Convert to i2c's .probe_new()
  drm/bridge/tc358775: Convert to i2c's .probe_new()
  drm/bridge: ti-sn65dsi83: Convert to i2c's .probe_new()
  drm/bridge: ti-sn65dsi86: Convert to i2c's .probe_new()
  drm/bridge: tfp410: Convert to i2c's .probe_new()
  drm/i2c/ch7006: Convert to i2c's .probe_new()
  drm/i2c/sil164: Convert to i2c's .probe_new()
  drm/i2c/tda9950: Convert to i2c's .probe_new()
  drm/i2c/tda998x: Convert to i2c's .probe_new()
  drm/panel: olimex-lcd-olinuxino: Convert to i2c's .probe_new()
  drm/panel: raspberrypi-touchscreen: Convert to i2c's .probe_new()
  i2c: core: Convert to i2c's .probe_new()
  i2c: slave-eeprom: Convert to i2c's .probe_new()
  i2c: smbus: Convert to i2c's .probe_new()
  i2c: mux: pca9541: Convert to i2c's .probe_new()
  i2c: mux: pca954x: Convert to i2c's .probe_new()
  iio: accel: adxl372_i2c: Convert to i2c's .probe_new()
  iio: accel: bma180: Convert to i2c's .probe_new()
  iio: accel: bma400: Convert to i2c's .probe_new()
  iio: accel: bmc150: Convert to i2c's .probe_new()
  iio: accel: da280: Convert to i2c's .probe_new()
  iio: accel: kxcjk-1013: Convert to i2c's .probe_new()
  iio: accel: mma7455_i2c: Convert to i2c's .probe_new()
  iio: accel: mma8452: Convert to i2c's .probe_new()
  iio: accel: mma9551: Convert to i2c's .probe_new()
  iio: accel: mma9553: Convert to i2c's .probe_new()
  iio: adc: ad7091r5: Convert to i2c's .probe_new()
  iio: adc: ad7291: Convert to i2c's .probe_new()
  iio: adc: ad799x: Convert to i2c's .probe_new()
  iio: adc: ina2xx-adc: Convert to i2c's .probe_new()
  iio: adc: ltc2471: Convert to i2c's .probe_new()
  iio: adc: ltc2485: Convert to i2c's .probe_new()
  iio: adc: ltc2497: Convert to i2c's .probe_new()
  iio: adc: max1363: Convert to i2c's .probe_new()
  iio: adc: max9611: Convert to i2c's .probe_new()
  iio: adc: mcp3422: Convert to i2c's .probe_new()
  iio: adc: ti-adc081c: Convert to i2c's .probe_new()
  iio: adc: ti-ads1015: Convert to i2c's .probe_new()
  iio: cdc: ad7150: Convert to i2c's .probe_new()
  iio: cdc: ad7746: Convert to i2c's .probe_new()
  iio: chemical: ams-iaq-core: Convert to i2c's .probe_new()
  iio: chemical: atlas-ezo-sensor: Convert to i2c's .probe_new()
  iio: chemical: atlas-sensor: Convert to i2c's .probe_new()
  iio: chemical: bme680_i2c: Convert to i2c's .probe_new()
  iio: chemical: ccs811: Convert to i2c's .probe_new()
  iio: chemical: scd4x: Convert to i2c's .probe_new()
  iio: chemical: sgp30: Convert to i2c's .probe_new()
  iio: chemical: sgp40: Convert to i2c's .probe_new()
  iio: chemical: vz89x: Convert to i2c's .probe_new()
  iio: dac: ad5064: Convert to i2c's .probe_new()
  iio: dac: ad5380: Convert to i2c's .probe_new()
  iio: dac: ad5446: Convert to i2c's .probe_new()
  iio: dac: ad5593r: Convert to i2c's .probe_new()
  iio: dac: ad5696-i2c: Convert to i2c's .probe_new()
  iio: dac: ds4424: Convert to i2c's .probe_new()
  iio: dac: m62332: Convert to i2c's .probe_new()
  iio: dac: max517: Convert to i2c's .probe_new()
  iio: dac: max5821: Convert to i2c's .probe_new()
  iio: dac: mcp4725: Convert to i2c's .probe_new()
  iio: dac: ti-dac5571: Convert to i2c's .probe_new()
  iio: gyro: bmg160_i2c: Convert to i2c's .probe_new()
  iio: gyro: itg3200_core: Convert to i2c's .probe_new()
  iio: gyro: mpu3050-i2c: Convert to i2c's .probe_new()
  iio: gyro: st_gyro_i2c: Convert to i2c's .probe_new()
  iio: health: afe4404: Convert to i2c's .probe_new()
  iio: health: max30100: Convert to i2c's .probe_new()
  iio: health: max30102: Convert to i2c's .probe_new()
  iio: humidity: am2315: Convert to i2c's .probe_new()
  iio: humidity: hdc100x: Convert to i2c's .probe_new()
  iio: humidity: hdc2010: Convert to i2c's .probe_new()
  iio: humidity: hts221_i2c: Convert to i2c's .probe_new()
  iio: humidity: htu21: Convert to i2c's .probe_new()
  iio: humidity: si7005: Convert to i2c's .probe_new()
  iio: humidity: si7020: Convert to i2c's .probe_new()
  iio: imu: bmi160/bmi160_i2c: Convert to i2c's .probe_new()
  iio: imu: fxos8700_i2c: Convert to i2c's .probe_new()
  iio: imu: inv_mpu6050: Convert to i2c's .probe_new()
  iio: imu: kmx61: Convert to i2c's .probe_new()
  iio: imu: st_lsm6dsx: Convert to i2c's .probe_new()
  iio: light: adjd_s311: Convert to i2c's .probe_new()
  iio: light: adux1020: Convert to i2c's .probe_new()
  iio: light: al3010: Convert to i2c's .probe_new()
  iio: light: al3320a: Convert to i2c's .probe_new()
  iio: light: apds9300: Convert to i2c's .probe_new()
  iio: light: apds9960: Convert to i2c's .probe_new()
  iio: light: bh1750: Convert to i2c's .probe_new()
  iio: light: bh1780: Convert to i2c's .probe_new()
  iio: light: cm3232: Convert to i2c's .probe_new()
  iio: light: cm3323: Convert to i2c's .probe_new()
  iio: light: cm36651: Convert to i2c's .probe_new()
  iio: light: gp2ap002: Convert to i2c's .probe_new()
  iio: light: gp2ap020a00f: Convert to i2c's .probe_new()
  iio: light: isl29018: Convert to i2c's .probe_new()
  iio: light: isl29028: Convert to i2c's .probe_new()
  iio: light: isl29125: Convert to i2c's .probe_new()
  iio: light: jsa1212: Convert to i2c's .probe_new()
  iio: light: ltr501: Convert to i2c's .probe_new()
  iio: light: lv0104cs: Convert to i2c's .probe_new()
  iio: light: max44000: Convert to i2c's .probe_new()
  iio: light: max44009: Convert to i2c's .probe_new()
  iio: light: noa1305: Convert to i2c's .probe_new()
  iio: light: opt3001: Convert to i2c's .probe_new()
  iio: light: pa12203001: Convert to i2c's .probe_new()
  iio: light: rpr0521: Convert to i2c's .probe_new()
  iio: light: si1133: Convert to i2c's .probe_new()
  iio: light: si1145: Convert to i2c's .probe_new()
  iio: light: st_uvis25_i2c: Convert to i2c's .probe_new()
  iio: light: stk3310: Convert to i2c's .probe_new()
  iio: light: tcs3414: Convert to i2c's .probe_new()
  iio: light: tcs3472: Convert to i2c's .probe_new()
  iio: light: tsl2563: Convert to i2c's .probe_new()
  iio: light: tsl2583: Convert to i2c's .probe_new()
  iio: light: tsl2772: Convert to i2c's .probe_new()
  iio: light: tsl4531: Convert to i2c's .probe_new()
  iio: light: us5182d: Convert to i2c's .probe_new()
  iio: light: vcnl4000: Convert to i2c's .probe_new()
  iio: light: vcnl4035: Convert to i2c's .probe_new()
  iio: light: veml6030: Convert to i2c's .probe_new()
  iio: light: veml6070: Convert to i2c's .probe_new()
  iio: light: zopt2201: Convert to i2c's .probe_new()
  iio: magnetometer: ak8974: Convert to i2c's .probe_new()
  iio: magnetometer: ak8975: Convert to i2c's .probe_new()
  iio: magnetometer: bmc150_magn_i2c: Convert to i2c's .probe_new()
  iio: magnetometer: hmc5843: Convert to i2c's .probe_new()
  iio: magnetometer: mag3110: Convert to i2c's .probe_new()
  iio: magnetometer: mmc35240: Convert to i2c's .probe_new()
  iio: magnetometer: yamaha-yas530: Convert to i2c's .probe_new()
  iio: potentiometer: ad5272: Convert to i2c's .probe_new()
  iio: potentiometer: ds1803: Convert to i2c's .probe_new()
  iio: potentiometer: max5432: Convert to i2c's .probe_new()
  iio: potentiometer: tpl0102: Convert to i2c's .probe_new()
  iio: potentiostat: lmp91000: Convert to i2c's .probe_new()
  iio: pressure: abp060mg: Convert to i2c's .probe_new()
  iio: pressure: bmp280-i2c: Convert to i2c's .probe_new()
  iio: pressure: dlhl60d: Convert to i2c's .probe_new()
  iio: pressure: dps310: Convert to i2c's .probe_new()
  iio: pressure: hp03: Convert to i2c's .probe_new()
  iio: pressure: hp206c: Convert to i2c's .probe_new()
  iio: pressure: icp10100: Convert to i2c's .probe_new()
  iio: pressure: mpl115_i2c: Convert to i2c's .probe_new()
  iio: pressure: mpl3115: Convert to i2c's .probe_new()
  iio: pressure: ms5611_i2c: Convert to i2c's .probe_new()
  iio: pressure: ms5637: Convert to i2c's .probe_new()
  iio: pressure: st_pressure_i2c: Convert to i2c's .probe_new()
  iio: pressure: t5403: Convert to i2c's .probe_new()
  iio: pressure: zpa2326_i2c: Convert to i2c's .probe_new()
  iio: proximity: isl29501: Convert to i2c's .probe_new()
  iio: proximity: mb1232: Convert to i2c's .probe_new()
  iio: proximity: pulsedlight-lidar-lite-v2: Convert to i2c's
    .probe_new()
  iio: proximity: rfd77402: Convert to i2c's .probe_new()
  iio: proximity: srf08: Convert to i2c's .probe_new()
  iio: proximity: sx9500: Convert to i2c's .probe_new()
  iio: temperature: mlx90614: Convert to i2c's .probe_new()
  iio: temperature: mlx90632: Convert to i2c's .probe_new()
  iio: temperature: tmp006: Convert to i2c's .probe_new()
  iio: temperature: tmp007: Convert to i2c's .probe_new()
  iio: temperature: tsys01: Convert to i2c's .probe_new()
  iio: temperature: tsys02d: Convert to i2c's .probe_new()
  Input: as5011 - Convert to i2c's .probe_new()
  Input: adp5588-keys - Convert to i2c's .probe_new()
  Input: adp5589-keys - Convert to i2c's .probe_new()
  Input: cap11xx - Convert to i2c's .probe_new()
  Input: dlink-dir685-touchkeys - Convert to i2c's .probe_new()
  Input: lm8323 - Convert to i2c's .probe_new()
  Input: lm8333 - Convert to i2c's .probe_new()
  Input: max7359_keypad - Convert to i2c's .probe_new()
  Input: mcs_touchkey - Convert to i2c's .probe_new()
  Input: mpr121_touchkey - Convert to i2c's .probe_new()
  Input: qt1070 - Convert to i2c's .probe_new()
  Input: qt2160 - Convert to i2c's .probe_new()
  Input: tca6416-keypad - Convert to i2c's .probe_new()
  Input: tca8418_keypad - Convert to i2c's .probe_new()
  Input: tm2-touchkey - Convert to i2c's .probe_new()
  Input: ad714x-i2c - Convert to i2c's .probe_new()
  Input: adxl34x-i2c - Convert to i2c's .probe_new()
  Input: apanel - Convert to i2c's .probe_new()
  Input: atmel_captouch - Convert to i2c's .probe_new()
  Input: bma150 - Convert to i2c's .probe_new()
  Input: cma3000_d0x_i2c - Convert to i2c's .probe_new()
  Input: da7280 - Convert to i2c's .probe_new()
  Input: drv260x - Convert to i2c's .probe_new()
  Input: drv2665 - Convert to i2c's .probe_new()
  Input: drv2667 - Convert to i2c's .probe_new()
  Input: ibm-panel - Convert to i2c's .probe_new()
  Input: kxtj9 - Convert to i2c's .probe_new()
  Input: mma8450 - Convert to i2c's .probe_new()
  Input: pcf8574_keypad - Convert to i2c's .probe_new()
  Input: cyapa - Convert to i2c's .probe_new()
  Input: elan_i2c_core - Convert to i2c's .probe_new()
  Input: synaptics_i2c - Convert to i2c's .probe_new()
  Input: rmi_i2c - Convert to i2c's .probe_new()
  Input: rmi_smbus - Convert to i2c's .probe_new()
  Input: ad7879-i2c - Convert to i2c's .probe_new()
  Input: ar1021_i2c - Convert to i2c's .probe_new()
  Input: atmel_mxt_ts - Convert to i2c's .probe_new()
  Input: auo-pixcir-ts - Convert to i2c's .probe_new()
  Input: bu21013_ts - Convert to i2c's .probe_new()
  Input: bu21029_ts - Convert to i2c's .probe_new()
  Input: chipone_icn8318 - Convert to i2c's .probe_new()
  Input: cy8ctma140 - Convert to i2c's .probe_new()
  Input: cy8ctmg110_ts - Convert to i2c's .probe_new()
  Input: cyttsp4 - Convert to i2c's .probe_new()
  Input: cyttsp5: Convert to i2c's .probe_new()
  Input: cyttsp_i2c - Convert to i2c's .probe_new()
  Input: edt-ft5x06 - Convert to i2c's .probe_new()
  Input: eeti_ts - Convert to i2c's .probe_new()
  Input: egalax_ts - Convert to i2c's .probe_new()
  Input: ektf2127 - Convert to i2c's .probe_new()
  Input: goodix - Convert to i2c's .probe_new()
  Input: hideep - Convert to i2c's .probe_new()
  Input: hx83112b: Convert to i2c's .probe_new()
  Input: hycon-hy46xx - Convert to i2c's .probe_new()
  Input: ili210x - Convert to i2c's .probe_new()
  Input: ilitek_ts_i2c - Convert to i2c's .probe_new()
  Input: iqs5xx - Convert to i2c's .probe_new()
  Input: max11801_ts - Convert to i2c's .probe_new()
  Input: mcs5000_ts - Convert to i2c's .probe_new()
  Input: melfas_mip4 - Convert to i2c's .probe_new()
  Input: migor_ts - Convert to i2c's .probe_new()
  Input: mms114 - Convert to i2c's .probe_new()
  Input: pixcir_i2c_ts - Convert to i2c's .probe_new()
  Input: raydium_i2c_ts - Convert to i2c's .probe_new()
  Input: rohm_bu21023 - Convert to i2c's .probe_new()
  Input: s6sy761 - Convert to i2c's .probe_new()
  Input: silead - Convert to i2c's .probe_new()
  Input: sis_i2c - Convert to i2c's .probe_new()
  Input: st1232 - Convert to i2c's .probe_new()
  Input: stmfts - Convert to i2c's .probe_new()
  Input: sx8654 - Convert to i2c's .probe_new()
  Input: tsc2004 - Convert to i2c's .probe_new()
  Input: tsc2007_core - Convert to i2c's .probe_new()
  Input: wacom_i2c - Convert to i2c's .probe_new()
  Input: wdt87xx_i2c - Convert to i2c's .probe_new()
  Input: zet6223 - Convert to i2c's .probe_new()
  Input: zforce_ts - Convert to i2c's .probe_new()
  leds: bd2802: Convert to i2c's .probe_new()
  leds: blinkm: Convert to i2c's .probe_new()
  leds: is31fl32xx: Convert to i2c's .probe_new()
  leds: lm3530: Convert to i2c's .probe_new()
  leds: lm3532: Convert to i2c's .probe_new()
  leds: lm355x: Convert to i2c's .probe_new()
  leds: lm3642: Convert to i2c's .probe_new()
  leds: lm3692x: Convert to i2c's .probe_new()
  leds: lm3697: Convert to i2c's .probe_new()
  leds: lp3944: Convert to i2c's .probe_new()
  leds: lp3952: Convert to i2c's .probe_new()
  leds: lp5521: Convert to i2c's .probe_new()
  leds: lp5523: Convert to i2c's .probe_new()
  leds: lp5562: Convert to i2c's .probe_new()
  leds: lp8501: Convert to i2c's .probe_new()
  leds: lp8860: Convert to i2c's .probe_new()
  leds: pca9532: Convert to i2c's .probe_new()
  leds: pca963x: Convert to i2c's .probe_new()
  leds: tca6507: Convert to i2c's .probe_new()
  leds: tlc591xx: Convert to i2c's .probe_new()
  leds: turris-omnia: Convert to i2c's .probe_new()
  macintosh: ams/ams-i2c: Convert to i2c's .probe_new()
  macintosh: therm_adt746x: Convert to i2c's .probe_new()
  macintosh: therm_windtunnel: Convert to i2c's .probe_new()
  macintosh: windfarm_ad7417_sensor: Convert to i2c's .probe_new()
  macintosh: windfarm_fcu_controls: Convert to i2c's .probe_new()
  macintosh: windfarm_lm75_sensor: Convert to i2c's .probe_new()
  macintosh: windfarm_lm87_sensor: Convert to i2c's .probe_new()
  macintosh: windfarm_max6690_sensor: Convert to i2c's .probe_new()
  macintosh: windfarm_smu_sat: Convert to i2c's .probe_new()
  media: dvb-frontends/a8293: Convert to i2c's .probe_new()
  media: dvb-frontends/af9013: Convert to i2c's .probe_new()
  media: dvb-frontends/af9033: Convert to i2c's .probe_new()
  media: dvb-frontends/au8522_decoder: Convert to i2c's .probe_new()
  media: dvb-frontends/cxd2099: Convert to i2c's .probe_new()
  media: dvb-frontends/cxd2820r_core: Convert to i2c's .probe_new()
  media: dvb-frontends/dvb-pll: Convert to i2c's .probe_new()
  media: dvb-frontends/helene: Convert to i2c's .probe_new()
  media: dvb-frontends/lgdt3306a: Convert to i2c's .probe_new()
  media: dvb-frontends/lgdt330x: Convert to i2c's .probe_new()
  media: dvb-frontends/m88ds3103: Convert to i2c's .probe_new()
  media: dvb-frontends/mn88443x: Convert to i2c's .probe_new()
  media: dvb-frontends/mn88472: Convert to i2c's .probe_new()
  media: dvb-frontends/mn88473: Convert to i2c's .probe_new()
  media: dvb-frontends/mxl692: Convert to i2c's .probe_new()
  media: dvb-frontends/rtl2830: Convert to i2c's .probe_new()
  media: dvb-frontends/rtl2832: Convert to i2c's .probe_new()
  media: dvb-frontends/si2165: Convert to i2c's .probe_new()
  media: dvb-frontends/si2168: Convert to i2c's .probe_new()
  media: dvb-frontends/sp2: Convert to i2c's .probe_new()
  media: dvb-frontends/stv090x: Convert to i2c's .probe_new()
  media: dvb-frontends/stv6110x: Convert to i2c's .probe_new()
  media: dvb-frontends/tc90522: Convert to i2c's .probe_new()
  media: dvb-frontends/tda10071: Convert to i2c's .probe_new()
  media: dvb-frontends/ts2020: Convert to i2c's .probe_new()
  media: i2c/ad5820: Convert to i2c's .probe_new()
  media: i2c/ad9389b: Convert to i2c's .probe_new()
  media: i2c/adp1653: Convert to i2c's .probe_new()
  media: i2c/adv7170: Convert to i2c's .probe_new()
  media: i2c/adv7175: Convert to i2c's .probe_new()
  media: i2c/adv7180: Convert to i2c's .probe_new()
  media: i2c/adv7183: Convert to i2c's .probe_new()
  media: i2c/adv7393: Convert to i2c's .probe_new()
  media: i2c/adv7511-v4l2: Convert to i2c's .probe_new()
  media: i2c/adv7604: Convert to i2c's .probe_new()
  media: i2c/adv7842: Convert to i2c's .probe_new()
  media: i2c/ak881x: Convert to i2c's .probe_new()
  media: i2c/bt819: Convert to i2c's .probe_new()
  media: i2c/bt856: Convert to i2c's .probe_new()
  media: i2c/bt866: Convert to i2c's .probe_new()
  media: i2c/cs3308: Convert to i2c's .probe_new()
  media: i2c/cs5345: Convert to i2c's .probe_new()
  media: i2c/cs53l32a: Convert to i2c's .probe_new()
  media: cx25840: Convert to i2c's .probe_new()
  media: i2c/ir-kbd-i2c: Convert to i2c's .probe_new()
  media: i2c/ks0127: Convert to i2c's .probe_new()
  media: i2c/lm3560: Convert to i2c's .probe_new()
  media: i2c/lm3646: Convert to i2c's .probe_new()
  media: i2c/m52790: Convert to i2c's .probe_new()
  media: m5mols: Convert to i2c's .probe_new()
  media: i2c/ml86v7667: Convert to i2c's .probe_new()
  media: i2c/msp3400-driver: Convert to i2c's .probe_new()
  media: i2c/mt9m032: Convert to i2c's .probe_new()
  media: i2c/mt9p031: Convert to i2c's .probe_new()
  media: i2c/mt9t001: Convert to i2c's .probe_new()
  media: i2c/mt9t112: Convert to i2c's .probe_new()
  media: i2c/mt9v011: Convert to i2c's .probe_new()
  media: i2c/mt9v032: Convert to i2c's .probe_new()
  media: i2c/noon010pc30: Convert to i2c's .probe_new()
  media: i2c/ov13858: Convert to i2c's .probe_new()
  media: i2c/ov6650: Convert to i2c's .probe_new()
  media: i2c/ov7640: Convert to i2c's .probe_new()
  media: i2c/ov7670: Convert to i2c's .probe_new()
  media: i2c/ov9640: Convert to i2c's .probe_new()
  media: i2c/rj54n1cb0c: Convert to i2c's .probe_new()
  media: i2c/s5k4ecgx: Convert to i2c's .probe_new()
  media: i2c/s5k6aa: Convert to i2c's .probe_new()
  media: i2c/saa6588: Convert to i2c's .probe_new()
  media: i2c/saa6752hs: Convert to i2c's .probe_new()
  media: i2c/saa7110: Convert to i2c's .probe_new()
  media: i2c/saa7115: Convert to i2c's .probe_new()
  media: i2c/saa7127: Convert to i2c's .probe_new()
  media: i2c/saa717x: Convert to i2c's .probe_new()
  media: i2c/saa7185: Convert to i2c's .probe_new()
  media: i2c/sony-btf-mpx: Convert to i2c's .probe_new()
  media: i2c/sr030pc30: Convert to i2c's .probe_new()
  media: i2c/tda1997x: Convert to i2c's .probe_new()
  media: i2c/tda7432: Convert to i2c's .probe_new()
  media: i2c/tda9840: Convert to i2c's .probe_new()
  media: i2c/tea6415c: Convert to i2c's .probe_new()
  media: i2c/tea6420: Convert to i2c's .probe_new()
  media: i2c/ths7303: Convert to i2c's .probe_new()
  media: i2c/tlv320aic23b: Convert to i2c's .probe_new()
  media: i2c/tvaudio: Convert to i2c's .probe_new()
  media: i2c/tvp514x: Convert to i2c's .probe_new()
  media: i2c/tw2804: Convert to i2c's .probe_new()
  media: i2c/tw9903: Convert to i2c's .probe_new()
  media: i2c/tw9906: Convert to i2c's .probe_new()
  media: i2c/tw9910: Convert to i2c's .probe_new()
  media: i2c/uda1342: Convert to i2c's .probe_new()
  media: i2c/upd64031a: Convert to i2c's .probe_new()
  media: i2c/upd64083: Convert to i2c's .probe_new()
  media: i2c/video-i2c: Convert to i2c's .probe_new()
  media: i2c/vp27smpx: Convert to i2c's .probe_new()
  media: i2c/vpx3220: Convert to i2c's .probe_new()
  media: i2c/vs6624: Convert to i2c's .probe_new()
  media: i2c/wm8739: Convert to i2c's .probe_new()
  media: i2c/wm8775: Convert to i2c's .probe_new()
  media: radio/radio-tea5764: Convert to i2c's .probe_new()
  media: radio/saa7706h: Convert to i2c's .probe_new()
  media: radio/tef6862: Convert to i2c's .probe_new()
  media: vidtv: Convert to i2c's .probe_new()
  media: tuners/e4000: Convert to i2c's .probe_new()
  media: tuners/fc2580: Convert to i2c's .probe_new()
  media: tuners/m88rs6000t: Convert to i2c's .probe_new()
  media: tuners/mt2060: Convert to i2c's .probe_new()
  media: tuners/mxl301rf: Convert to i2c's .probe_new()
  media: tuners/qm1d1b0004: Convert to i2c's .probe_new()
  media: tuners/qm1d1c0042: Convert to i2c's .probe_new()
  media: tuners/si2157: Convert to i2c's .probe_new()
  media: tuners/tda18212: Convert to i2c's .probe_new()
  media: tuners/tda18250: Convert to i2c's .probe_new()
  media: tuners/tua9001: Convert to i2c's .probe_new()
  media: usb: go7007: s2250-board: Convert to i2c's .probe_new()
  media: v4l2-core/tuner-core: Convert to i2c's .probe_new()
  mfd: 88pm800: Convert to i2c's .probe_new()
  mfd: 88pm805: Convert to i2c's .probe_new()
  mfd: aat2870-core: Convert to i2c's .probe_new()
  mfd: act8945a: Convert to i2c's .probe_new()
  mfd: adp5520: Convert to i2c's .probe_new()
  mfd: arizona-i2c: Convert to i2c's .probe_new()
  mfd: as3711: Convert to i2c's .probe_new()
  mfd: as3722: Convert to i2c's .probe_new()
  mfd: atc260x-i2c: Convert to i2c's .probe_new()
  mfd: axp20x-i2c: Convert to i2c's .probe_new()
  mfd: bcm590xx: Convert to i2c's .probe_new()
  mfd: bd9571mwv: Convert to i2c's .probe_new()
  mfd: da903x: Convert to i2c's .probe_new()
  mfd: da9052-i2c: Convert to i2c's .probe_new()
  mfd: da9055-i2c: Convert to i2c's .probe_new()
  mfd: da9062-core: Convert to i2c's .probe_new()
  mfd: da9063-i2c: Convert to i2c's .probe_new()
  mfd: da9150-core: Convert to i2c's .probe_new()
  mfd: khadas-mcu: Convert to i2c's .probe_new()
  mfd: lm3533-core: Convert to i2c's .probe_new()
  mfd: lp3943: Convert to i2c's .probe_new()
  mfd: lp873x: Convert to i2c's .probe_new()
  mfd: lp87565: Convert to i2c's .probe_new()
  mfd: lp8788: Convert to i2c's .probe_new()
  mfd: madera-i2c: Convert to i2c's .probe_new()
  mfd: max14577: Convert to i2c's .probe_new()
  mfd: max77620: Convert to i2c's .probe_new()
  mfd: max77693: Convert to i2c's .probe_new()
  mfd: max77843: Convert to i2c's .probe_new()
  mfd: max8907: Convert to i2c's .probe_new()
  mfd: max8925-i2c: Convert to i2c's .probe_new()
  mfd: max8997: Convert to i2c's .probe_new()
  mfd: max8998: Convert to i2c's .probe_new()
  mfd: mc13xxx-i2c: Convert to i2c's .probe_new()
  mfd: menelaus: Convert to i2c's .probe_new()
  mfd: menf21bmc: Convert to i2c's .probe_new()
  mfd: palmas: Convert to i2c's .probe_new()
  mfd: pcf50633-core: Convert to i2c's .probe_new()
  mfd: rc5t583: Convert to i2c's .probe_new()
  mfd: retu-mfd: Convert to i2c's .probe_new()
  mfd: rk808: Convert to i2c's .probe_new()
  mfd: rohm-bd718x7: Convert to i2c's .probe_new()
  mfd: rsmu_i2c: Convert to i2c's .probe_new()
  mfd: rt5033: Convert to i2c's .probe_new()
  mfd: sec-core: Convert to i2c's .probe_new()
  mfd: si476x-i2c: Convert to i2c's .probe_new()
  mfd: sky81452: Convert to i2c's .probe_new()
  mfd: stmfx: Convert to i2c's .probe_new()
  mfd: stmpe-i2c: Convert to i2c's .probe_new()
  mfd: stpmic1: Convert to i2c's .probe_new()
  mfd: stw481x: Convert to i2c's .probe_new()
  mfd: tc3589x: Convert to i2c's .probe_new()
  mfd: ti-lmu: Convert to i2c's .probe_new()
  mfd: tps6105x: Convert to i2c's .probe_new()
  mfd: tps65010: Convert to i2c's .probe_new()
  mfd: tps6507x: Convert to i2c's .probe_new()
  mfd: tps65086: Convert to i2c's .probe_new()
  mfd: tps65090: Convert to i2c's .probe_new()
  mfd: tps65218: Convert to i2c's .probe_new()
  mfd: tps6586x: Convert to i2c's .probe_new()
  mfd: tps65910: Convert to i2c's .probe_new()
  mfd: tps65912-i2c: Convert to i2c's .probe_new()
  mfd: twl-core: Convert to i2c's .probe_new()
  mfd: twl6040: Convert to i2c's .probe_new()
  mfd: wl1273-core: Convert to i2c's .probe_new()
  mfd: wm831x-i2c: Convert to i2c's .probe_new()
  mfd: wm8350-i2c: Convert to i2c's .probe_new()
  mfd: wm8400-core: Convert to i2c's .probe_new()
  mfd: wm8994-core: Convert to i2c's .probe_new()
  misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
  misc: apds9802als: Convert to i2c's .probe_new()
  misc: apds990x: Convert to i2c's .probe_new()
  misc: bh1770glc: Convert to i2c's .probe_new()
  misc: ds1682: Convert to i2c's .probe_new()
  misc: eeprom/eeprom: Convert to i2c's .probe_new()
  misc: eeprom/idt_89hpesx: Convert to i2c's .probe_new()
  misc: eeprom/max6875: Convert to i2c's .probe_new()
  misc: hmc6352: Convert to i2c's .probe_new()
  misc: ics932s401: Convert to i2c's .probe_new()
  misc: isl29003: Convert to i2c's .probe_new()
  misc: isl29020: Convert to i2c's .probe_new()
  misc: lis3lv02d/lis3lv02d_i2c: Convert to i2c's .probe_new()
  misc: tsl2550: Convert to i2c's .probe_new()
  mtd: maps: pismo: Convert to i2c's .probe_new()
  net: dsa: lan9303: Convert to i2c's .probe_new()
  net: dsa: microchip: ksz9477: Convert to i2c's .probe_new()
  net: dsa: xrs700x: Convert to i2c's .probe_new()
  net/mlx5: Convert to i2c's .probe_new()
  nfc: microread: Convert to i2c's .probe_new()
  nfc: mrvl: Convert to i2c's .probe_new()
  NFC: nxp-nci: Convert to i2c's .probe_new()
  nfc: pn533: Convert to i2c's .probe_new()
  nfc: pn544: Convert to i2c's .probe_new()
  nfc: s3fwrn5: Convert to i2c's .probe_new()
  nfc: st-nci: Convert to i2c's .probe_new()
  nfc: st21nfca: i2c: Convert to i2c's .probe_new()
  of: unittest: Convert to i2c's .probe_new()
  pinctrl: mcp23s08: Convert to i2c's .probe_new()
  pinctrl: sx150x: Convert to i2c's .probe_new()
  platform/chrome: cros_ec: Convert to i2c's .probe_new()
  power: supply: adp5061: Convert to i2c's .probe_new()
  power: supply: bq2415x: Convert to i2c's .probe_new()
  power: supply: bq24190: Convert to i2c's .probe_new()
  power: supply: bq24257: Convert to i2c's .probe_new()
  power: supply: bq24735: Convert to i2c's .probe_new()
  power: supply: bq2515x: Convert to i2c's .probe_new()
  power: supply: bq256xx: Convert to i2c's .probe_new()
  power: supply: bq25890: Convert to i2c's .probe_new()
  power: supply: bq25980: Convert to i2c's .probe_new()
  power: supply: bq27xxx: Convert to i2c's .probe_new()
  power: supply: ds2782: Convert to i2c's .probe_new()
  power: supply: lp8727: Convert to i2c's .probe_new()
  power: supply: ltc2941: Convert to i2c's .probe_new()
  power: supply: ltc4162-l: Convert to i2c's .probe_new()
  power: supply: max14656: Convert to i2c's .probe_new()
  power: supply: max17040: Convert to i2c's .probe_new()
  power: supply: max17042_battery: Convert to i2c's .probe_new()
  power: supply: rt5033_battery: Convert to i2c's .probe_new()
  power: supply: rt9455: Convert to i2c's .probe_new()
  power: supply: sbs: Convert to i2c's .probe_new()
  power: supply: sbs-manager: Convert to i2c's .probe_new()
  power: supply: smb347: Convert to i2c's .probe_new()
  power: supply: ucs1002: Convert to i2c's .probe_new()
  power: supply: z2_battery: Convert to i2c's .probe_new()
  pwm: pca9685: Convert to i2c's .probe_new()
  regulator: act8865-regulator: Convert to i2c's .probe_new()
  regulator: ad5398: Convert to i2c's .probe_new()
  regulator: da9121-regulator: Convert to i2c's .probe_new()
  regulator: fan53555: Convert to i2c's .probe_new()
  regulator: isl6271a-regulator: Convert to i2c's .probe_new()
  regulator: lp3972: Convert to i2c's .probe_new()
  regulator: lp872x: Convert to i2c's .probe_new()
  regulator: lp8755: Convert to i2c's .probe_new()
  regulator: ltc3589: Convert to i2c's .probe_new()
  regulator: max1586: Convert to i2c's .probe_new()
  regulator: max8649: Convert to i2c's .probe_new()
  regulator: max8660: Convert to i2c's .probe_new()
  regulator: max8952: Convert to i2c's .probe_new()
  regulator: max8973-regulator: Convert to i2c's .probe_new()
  regulator: pca9450-regulator: Convert to i2c's .probe_new()
  regulator: pfuze100-regulator: Convert to i2c's .probe_new()
  regulator: pv88080-regulator: Convert to i2c's .probe_new()
  regulator: rpi-panel-attiny-regulator: Convert to i2c's .probe_new()
  regulator: tps51632-regulator: Convert to i2c's .probe_new()
  regulator: tps62360-regulator: Convert to i2c's .probe_new()
  regulator: tps6286x-regulator: Convert to i2c's .probe_new()
  regulator: tps65023-regulator: Convert to i2c's .probe_new()
  rtc: ds1307: Convert to i2c's .probe_new()
  rtc: isl1208: Convert to i2c's .probe_new()
  rtc: m41t80: Convert to i2c's .probe_new()
  rtc: rs5c372: Convert to i2c's .probe_new()
  spi: sc18is602: Convert to i2c's .probe_new()
  spi: xcomm: Convert to i2c's .probe_new()
  staging: iio: adt7316: Convert to i2c's .probe_new()
  staging: iio: ad5933: Convert to i2c's .probe_new()
  staging: iio: ade7854: Convert to i2c's .probe_new()
  staging: most: i2c: Convert to i2c's .probe_new()
  staging: olpc_dcon: Convert to i2c's .probe_new()
  serial: sc16is7xx: Convert to i2c's .probe_new()
  usb: usb251xb: Convert to i2c's .probe_new()
  usb: misc: usb3503: Convert to i2c's .probe_new()
  usb: usb4604: Convert to i2c's .probe_new()
  usb: isp1301-omap: Convert to i2c's .probe_new()
  usb: phy: isp1301: Convert to i2c's .probe_new()
  usb: typec: anx7411: Convert to i2c's .probe_new()
  usb: typec: hd3ss3220: Convert to i2c's .probe_new()
  usb: typec: tcpm/fusb302: Convert to i2c's .probe_new()
  usb: typec: tcpm/tcpci: Convert to i2c's .probe_new()
  usb: typec: tcpm/tcpci_maxim: Convert to i2c's .probe_new()
  usb: typec: tcpm/tcpci_rt1711h: Convert to i2c's .probe_new()
  usb: typec: ucsi/ucsi_ccg: Convert to i2c's .probe_new()
  usb: typec: ucsi: stm32g0: Convert to i2c's .probe_new()
  backlight: adp8860: Convert to i2c's .probe_new()
  backlight: adp8870: Convert to i2c's .probe_new()
  backlight: arcxcnn: Convert to i2c's .probe_new()
  backlight: bd6107: Convert to i2c's .probe_new()
  backlight: lm3630a: Convert to i2c's .probe_new()
  backlight: lm3639: Convert to i2c's .probe_new()
  backlight: lp855x: Convert to i2c's .probe_new()
  backlight: lv5207lp: Convert to i2c's .probe_new()
  backlight: tosa: Convert to i2c's .probe_new()
  video: fbdev: matrox: Convert to i2c's .probe_new()
  w1: ds2482: Convert to i2c's .probe_new()
  watchdog: ziirave_wdt: Convert to i2c's .probe_new()
  ALSA: aoa: onyx: Convert to i2c's .probe_new()
  ALSA: aoa: tas: Convert to i2c's .probe_new()
  ALSA: hda: cs35l41: Convert to i2c's .probe_new()
  ALSA: ppc: keywest: Convert to i2c's .probe_new()
  ASoC: codecs: es8326: Convert to i2c's .probe_new()
  ASoC: max98396: Convert to i2c's .probe_new()
  ASoC: codecs: src4xxx-i2c: Convert to i2c's .probe_new()
  ASoC: codecs: tas2780: Convert to i2c's .probe_new()
  ipmi: ssif_bmc: Convert to i2c's .probe_new()
  [DON'T APPLY] i2c: Switch .probe() to not take an id parameter

 drivers/char/ipmi/ssif_bmc.c                     |  4 ++--
 drivers/char/tpm/st33zp24/i2c.c                  |  5 ++---
 drivers/char/tpm/tpm_i2c_atmel.c                 |  5 ++---
 drivers/char/tpm/tpm_i2c_infineon.c              |  5 ++---
 drivers/char/tpm/tpm_i2c_nuvoton.c               |  6 +++---
 drivers/char/tpm/tpm_tis_i2c.c                   |  5 ++---
 drivers/crypto/atmel-ecc.c                       |  6 +++---
 drivers/crypto/atmel-sha204a.c                   |  6 +++---
 drivers/extcon/extcon-fsa9480.c                  |  5 ++---
 drivers/extcon/extcon-rt8973a.c                  |  5 ++---
 drivers/extcon/extcon-usbc-tusb320.c             |  5 ++---
 drivers/gpio/gpio-max732x.c                      |  6 +++---
 drivers/gpio/gpio-pca953x.c                      |  6 +++---
 drivers/gpio/gpio-pcf857x.c                      |  6 +++---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c     |  5 +++--
 .../gpu/drm/bridge/analogix/analogix-anx6345.c   |  5 ++---
 .../gpu/drm/bridge/analogix/analogix-anx78xx.c   |  5 ++---
 drivers/gpu/drm/bridge/analogix/anx7625.c        |  5 ++---
 drivers/gpu/drm/bridge/chipone-icn6211.c         |  5 ++---
 drivers/gpu/drm/bridge/chrontel-ch7033.c         |  5 ++---
 drivers/gpu/drm/bridge/ite-it6505.c              |  5 ++---
 drivers/gpu/drm/bridge/ite-it66121.c             |  5 ++---
 drivers/gpu/drm/bridge/lontium-lt8912b.c         |  5 ++---
 drivers/gpu/drm/bridge/lontium-lt9211.c          |  5 ++---
 drivers/gpu/drm/bridge/lontium-lt9611.c          |  5 ++---
 drivers/gpu/drm/bridge/lontium-lt9611uxc.c       |  5 ++---
 .../drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 10 ++++------
 drivers/gpu/drm/bridge/nxp-ptn3460.c             |  5 ++---
 drivers/gpu/drm/bridge/parade-ps8622.c           |  6 +++---
 drivers/gpu/drm/bridge/sii902x.c                 |  5 ++---
 drivers/gpu/drm/bridge/sii9234.c                 |  5 ++---
 drivers/gpu/drm/bridge/sil-sii8620.c             |  5 ++---
 drivers/gpu/drm/bridge/tc358767.c                |  4 ++--
 drivers/gpu/drm/bridge/tc358768.c                |  5 ++---
 drivers/gpu/drm/bridge/tc358775.c                |  4 ++--
 drivers/gpu/drm/bridge/ti-sn65dsi83.c            |  6 +++---
 drivers/gpu/drm/bridge/ti-sn65dsi86.c            |  5 ++---
 drivers/gpu/drm/bridge/ti-tfp410.c               |  5 ++---
 drivers/gpu/drm/i2c/ch7006_drv.c                 |  4 ++--
 drivers/gpu/drm/i2c/sil164_drv.c                 |  4 ++--
 drivers/gpu/drm/i2c/tda9950.c                    |  5 ++---
 drivers/gpu/drm/i2c/tda998x_drv.c                |  4 ++--
 .../gpu/drm/panel/panel-olimex-lcd-olinuxino.c   |  5 ++---
 .../drm/panel/panel-raspberrypi-touchscreen.c    |  5 ++---
 drivers/i2c/i2c-core-base.c                      | 16 ++++------------
 drivers/i2c/i2c-slave-eeprom.c                   |  5 +++--
 drivers/i2c/i2c-smbus.c                          |  5 ++---
 drivers/i2c/muxes/i2c-mux-pca9541.c              |  5 ++---
 drivers/i2c/muxes/i2c-mux-pca954x.c              |  6 +++---
 drivers/iio/accel/adxl372_i2c.c                  |  6 +++---
 drivers/iio/accel/bma180.c                       |  6 +++---
 drivers/iio/accel/bma400_i2c.c                   |  6 +++---
 drivers/iio/accel/bmc150-accel-i2c.c             |  6 +++---
 drivers/iio/accel/da280.c                        |  6 +++---
 drivers/iio/accel/kxcjk-1013.c                   |  6 +++---
 drivers/iio/accel/mma7455_i2c.c                  |  6 +++---
 drivers/iio/accel/mma8452.c                      |  6 +++---
 drivers/iio/accel/mma9551.c                      |  6 +++---
 drivers/iio/accel/mma9553.c                      |  6 +++---
 drivers/iio/adc/ad7091r5.c                       |  6 +++---
 drivers/iio/adc/ad7291.c                         |  6 +++---
 drivers/iio/adc/ad799x.c                         |  6 +++---
 drivers/iio/adc/ina2xx-adc.c                     |  6 +++---
 drivers/iio/adc/ltc2471.c                        |  6 +++---
 drivers/iio/adc/ltc2485.c                        |  6 +++---
 drivers/iio/adc/ltc2497.c                        |  6 +++---
 drivers/iio/adc/max1363.c                        |  6 +++---
 drivers/iio/adc/max9611.c                        |  5 ++---
 drivers/iio/adc/mcp3422.c                        |  6 +++---
 drivers/iio/adc/ti-adc081c.c                     |  6 +++---
 drivers/iio/adc/ti-ads1015.c                     |  6 +++---
 drivers/iio/cdc/ad7150.c                         |  6 +++---
 drivers/iio/cdc/ad7746.c                         |  6 +++---
 drivers/iio/chemical/ams-iaq-core.c              |  5 ++---
 drivers/iio/chemical/atlas-ezo-sensor.c          |  6 +++---
 drivers/iio/chemical/atlas-sensor.c              |  6 +++---
 drivers/iio/chemical/bme680_i2c.c                |  6 +++---
 drivers/iio/chemical/ccs811.c                    |  6 +++---
 drivers/iio/chemical/scd4x.c                     |  4 ++--
 drivers/iio/chemical/sgp30.c                     |  6 +++---
 drivers/iio/chemical/sgp40.c                     |  6 +++---
 drivers/iio/chemical/vz89x.c                     |  6 +++---
 drivers/iio/dac/ad5064.c                         |  6 +++---
 drivers/iio/dac/ad5380.c                         |  6 +++---
 drivers/iio/dac/ad5446.c                         |  6 +++---
 drivers/iio/dac/ad5593r.c                        |  6 +++---
 drivers/iio/dac/ad5696-i2c.c                     |  6 +++---
 drivers/iio/dac/ds4424.c                         |  6 +++---
 drivers/iio/dac/m62332.c                         |  5 ++---
 drivers/iio/dac/max517.c                         |  6 +++---
 drivers/iio/dac/max5821.c                        |  6 +++---
 drivers/iio/dac/mcp4725.c                        |  6 +++---
 drivers/iio/dac/ti-dac5571.c                     |  6 +++---
 drivers/iio/gyro/bmg160_i2c.c                    |  6 +++---
 drivers/iio/gyro/itg3200_core.c                  |  5 ++---
 drivers/iio/gyro/mpu3050-i2c.c                   |  6 +++---
 drivers/iio/gyro/st_gyro_i2c.c                   |  5 ++---
 drivers/iio/health/afe4404.c                     |  5 ++---
 drivers/iio/health/max30100.c                    |  5 ++---
 drivers/iio/health/max30102.c                    |  6 +++---
 drivers/iio/humidity/am2315.c                    |  5 ++---
 drivers/iio/humidity/hdc100x.c                   |  5 ++---
 drivers/iio/humidity/hdc2010.c                   |  5 ++---
 drivers/iio/humidity/hts221_i2c.c                |  5 ++---
 drivers/iio/humidity/htu21.c                     |  6 +++---
 drivers/iio/humidity/si7005.c                    |  5 ++---
 drivers/iio/humidity/si7020.c                    |  5 ++---
 drivers/iio/imu/bmi160/bmi160_i2c.c              |  6 +++---
 drivers/iio/imu/fxos8700_i2c.c                   |  6 +++---
 drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c        |  6 +++---
 drivers/iio/imu/kmx61.c                          |  6 +++---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c      |  6 +++---
 drivers/iio/light/adjd_s311.c                    |  5 ++---
 drivers/iio/light/adux1020.c                     |  5 ++---
 drivers/iio/light/al3010.c                       |  5 ++---
 drivers/iio/light/al3320a.c                      |  5 ++---
 drivers/iio/light/apds9300.c                     |  5 ++---
 drivers/iio/light/apds9960.c                     |  5 ++---
 drivers/iio/light/bh1750.c                       |  6 +++---
 drivers/iio/light/bh1780.c                       |  5 ++---
 drivers/iio/light/cm3232.c                       |  6 +++---
 drivers/iio/light/cm3323.c                       |  5 ++---
 drivers/iio/light/cm36651.c                      |  6 +++---
 drivers/iio/light/gp2ap002.c                     |  5 ++---
 drivers/iio/light/gp2ap020a00f.c                 |  6 +++---
 drivers/iio/light/isl29018.c                     |  6 +++---
 drivers/iio/light/isl29028.c                     |  6 +++---
 drivers/iio/light/isl29125.c                     |  5 ++---
 drivers/iio/light/jsa1212.c                      |  5 ++---
 drivers/iio/light/ltr501.c                       |  6 +++---
 drivers/iio/light/lv0104cs.c                     |  5 ++---
 drivers/iio/light/max44000.c                     |  5 ++---
 drivers/iio/light/max44009.c                     |  5 ++---
 drivers/iio/light/noa1305.c                      |  5 ++---
 drivers/iio/light/opt3001.c                      |  5 ++---
 drivers/iio/light/pa12203001.c                   |  5 ++---
 drivers/iio/light/rpr0521.c                      |  5 ++---
 drivers/iio/light/si1133.c                       |  6 +++---
 drivers/iio/light/si1145.c                       |  6 +++---
 drivers/iio/light/st_uvis25_i2c.c                |  5 ++---
 drivers/iio/light/stk3310.c                      |  5 ++---
 drivers/iio/light/tcs3414.c                      |  5 ++---
 drivers/iio/light/tcs3472.c                      |  5 ++---
 drivers/iio/light/tsl2563.c                      |  5 ++---
 drivers/iio/light/tsl2583.c                      |  5 ++---
 drivers/iio/light/tsl2772.c                      |  6 +++---
 drivers/iio/light/tsl4531.c                      |  5 ++---
 drivers/iio/light/us5182d.c                      |  5 ++---
 drivers/iio/light/vcnl4000.c                     |  6 +++---
 drivers/iio/light/vcnl4035.c                     |  5 ++---
 drivers/iio/light/veml6030.c                     |  5 ++---
 drivers/iio/light/veml6070.c                     |  5 ++---
 drivers/iio/light/zopt2201.c                     |  5 ++---
 drivers/iio/magnetometer/ak8974.c                |  5 ++---
 drivers/iio/magnetometer/ak8975.c                |  6 +++---
 drivers/iio/magnetometer/bmc150_magn_i2c.c       |  6 +++---
 drivers/iio/magnetometer/hmc5843_i2c.c           |  6 +++---
 drivers/iio/magnetometer/mag3110.c               |  6 +++---
 drivers/iio/magnetometer/mmc35240.c              |  5 ++---
 drivers/iio/magnetometer/yamaha-yas530.c         |  6 +++---
 drivers/iio/potentiometer/ad5272.c               |  6 +++---
 drivers/iio/potentiometer/ds1803.c               |  5 +++--
 drivers/iio/potentiometer/max5432.c              |  5 ++---
 drivers/iio/potentiometer/tpl0102.c              |  6 +++---
 drivers/iio/potentiostat/lmp91000.c              |  5 ++---
 drivers/iio/pressure/abp060mg.c                  |  6 +++---
 drivers/iio/pressure/bmp280-i2c.c                |  1 +
 drivers/iio/pressure/dlhl60d.c                   |  6 +++---
 drivers/iio/pressure/dps310.c                    |  6 +++---
 drivers/iio/pressure/hp03.c                      |  6 +++---
 drivers/iio/pressure/hp206c.c                    |  6 +++---
 drivers/iio/pressure/icp10100.c                  |  5 ++---
 drivers/iio/pressure/mpl115_i2c.c                |  6 +++---
 drivers/iio/pressure/mpl3115.c                   |  6 +++---
 drivers/iio/pressure/ms5611_i2c.c                |  6 +++---
 drivers/iio/pressure/ms5637.c                    |  6 +++---
 drivers/iio/pressure/st_pressure_i2c.c           |  5 ++---
 drivers/iio/pressure/t5403.c                     |  6 +++---
 drivers/iio/pressure/zpa2326_i2c.c               |  6 +++---
 drivers/iio/proximity/isl29501.c                 |  5 ++---
 drivers/iio/proximity/mb1232.c                   |  6 +++---
 .../iio/proximity/pulsedlight-lidar-lite-v2.c    |  5 ++---
 drivers/iio/proximity/rfd77402.c                 |  5 ++---
 drivers/iio/proximity/srf08.c                    |  6 +++---
 drivers/iio/proximity/sx9500.c                   |  5 ++---
 drivers/iio/temperature/mlx90614.c               |  6 +++---
 drivers/iio/temperature/mlx90632.c               | 12 ++++++++++--
 drivers/iio/temperature/tmp006.c                 |  5 ++---
 drivers/iio/temperature/tmp007.c                 |  6 +++---
 drivers/iio/temperature/tsys01.c                 |  5 ++---
 drivers/iio/temperature/tsys02d.c                |  6 +++---
 drivers/input/joystick/as5011.c                  |  5 ++---
 drivers/input/keyboard/adp5588-keys.c            |  5 ++---
 drivers/input/keyboard/adp5589-keys.c            |  6 +++---
 drivers/input/keyboard/cap11xx.c                 |  6 +++---
 drivers/input/keyboard/dlink-dir685-touchkeys.c  |  5 ++---
 drivers/input/keyboard/lm8323.c                  |  5 ++---
 drivers/input/keyboard/lm8333.c                  |  5 ++---
 drivers/input/keyboard/max7359_keypad.c          |  5 ++---
 drivers/input/keyboard/mcs_touchkey.c            |  6 +++---
 drivers/input/keyboard/mpr121_touchkey.c         |  5 ++---
 drivers/input/keyboard/qt1070.c                  |  5 ++---
 drivers/input/keyboard/qt2160.c                  |  5 ++---
 drivers/input/keyboard/tca6416-keypad.c          |  6 +++---
 drivers/input/keyboard/tca8418_keypad.c          |  5 ++---
 drivers/input/keyboard/tm2-touchkey.c            |  5 ++---
 drivers/input/misc/ad714x-i2c.c                  |  5 ++---
 drivers/input/misc/adxl34x-i2c.c                 |  5 ++---
 drivers/input/misc/apanel.c                      |  5 ++---
 drivers/input/misc/atmel_captouch.c              |  5 ++---
 drivers/input/misc/bma150.c                      |  5 ++---
 drivers/input/misc/cma3000_d0x_i2c.c             |  5 ++---
 drivers/input/misc/da7280.c                      |  5 ++---
 drivers/input/misc/drv260x.c                     |  5 ++---
 drivers/input/misc/drv2665.c                     |  5 ++---
 drivers/input/misc/drv2667.c                     |  5 ++---
 drivers/input/misc/ibm-panel.c                   |  5 ++---
 drivers/input/misc/kxtj9.c                       |  5 ++---
 drivers/input/misc/mma8450.c                     |  5 ++---
 drivers/input/misc/pcf8574_keypad.c              |  4 ++--
 drivers/input/mouse/cyapa.c                      |  5 ++---
 drivers/input/mouse/elan_i2c_core.c              |  5 ++---
 drivers/input/mouse/synaptics_i2c.c              |  5 ++---
 drivers/input/rmi4/rmi_i2c.c                     |  5 ++---
 drivers/input/rmi4/rmi_smbus.c                   |  5 ++---
 drivers/input/touchscreen/ad7879-i2c.c           |  5 ++---
 drivers/input/touchscreen/ar1021_i2c.c           |  5 ++---
 drivers/input/touchscreen/atmel_mxt_ts.c         |  4 ++--
 drivers/input/touchscreen/auo-pixcir-ts.c        |  5 ++---
 drivers/input/touchscreen/bu21013_ts.c           |  5 ++---
 drivers/input/touchscreen/bu21029_ts.c           |  5 ++---
 drivers/input/touchscreen/chipone_icn8318.c      |  5 ++---
 drivers/input/touchscreen/cy8ctma140.c           |  5 ++---
 drivers/input/touchscreen/cy8ctmg110_ts.c        |  5 ++---
 drivers/input/touchscreen/cyttsp4_i2c.c          |  5 ++---
 drivers/input/touchscreen/cyttsp5.c              |  5 ++---
 drivers/input/touchscreen/cyttsp_i2c.c           |  5 ++---
 drivers/input/touchscreen/edt-ft5x06.c           |  6 +++---
 drivers/input/touchscreen/eeti_ts.c              |  5 ++---
 drivers/input/touchscreen/egalax_ts.c            |  5 ++---
 drivers/input/touchscreen/ektf2127.c             |  5 ++---
 drivers/input/touchscreen/goodix.c               |  5 ++---
 drivers/input/touchscreen/hideep.c               |  5 ++---
 drivers/input/touchscreen/himax_hx83112b.c       |  5 ++---
 drivers/input/touchscreen/hycon-hy46xx.c         |  5 ++---
 drivers/input/touchscreen/ili210x.c              |  6 +++---
 drivers/input/touchscreen/ilitek_ts_i2c.c        |  5 ++---
 drivers/input/touchscreen/iqs5xx.c               |  5 ++---
 drivers/input/touchscreen/max11801_ts.c          |  5 ++---
 drivers/input/touchscreen/mcs5000_ts.c           |  5 ++---
 drivers/input/touchscreen/melfas_mip4.c          |  4 ++--
 drivers/input/touchscreen/migor_ts.c             |  5 ++---
 drivers/input/touchscreen/mms114.c               |  5 ++---
 drivers/input/touchscreen/pixcir_i2c_ts.c        |  6 +++---
 drivers/input/touchscreen/raydium_i2c_ts.c       |  5 ++---
 drivers/input/touchscreen/rohm_bu21023.c         |  5 ++---
 drivers/input/touchscreen/s6sy761.c              |  5 ++---
 drivers/input/touchscreen/silead.c               |  6 +++---
 drivers/input/touchscreen/sis_i2c.c              |  5 ++---
 drivers/input/touchscreen/st1232.c               |  6 +++---
 drivers/input/touchscreen/stmfts.c               |  5 ++---
 drivers/input/touchscreen/sx8654.c               |  6 +++---
 drivers/input/touchscreen/tsc2004.c              |  5 ++---
 drivers/input/touchscreen/tsc2007_core.c         |  6 +++---
 drivers/input/touchscreen/wacom_i2c.c            |  5 ++---
 drivers/input/touchscreen/wdt87xx_i2c.c          |  5 ++---
 drivers/input/touchscreen/zet6223.c              |  5 ++---
 drivers/input/touchscreen/zforce_ts.c            |  5 ++---
 drivers/leds/leds-bd2802.c                       |  5 ++---
 drivers/leds/leds-blinkm.c                       |  5 ++---
 drivers/leds/leds-is31fl32xx.c                   |  5 ++---
 drivers/leds/leds-lm3530.c                       |  5 ++---
 drivers/leds/leds-lm3532.c                       |  5 ++---
 drivers/leds/leds-lm355x.c                       |  6 +++---
 drivers/leds/leds-lm3642.c                       |  5 ++---
 drivers/leds/leds-lm3692x.c                      |  6 +++---
 drivers/leds/leds-lm3697.c                       |  5 ++---
 drivers/leds/leds-lp3944.c                       |  5 ++---
 drivers/leds/leds-lp3952.c                       |  5 ++---
 drivers/leds/leds-lp5521.c                       |  6 +++---
 drivers/leds/leds-lp5523.c                       |  6 +++---
 drivers/leds/leds-lp5562.c                       |  5 ++---
 drivers/leds/leds-lp8501.c                       |  6 +++---
 drivers/leds/leds-lp8860.c                       |  5 ++---
 drivers/leds/leds-pca9532.c                      |  9 ++++-----
 drivers/leds/leds-pca963x.c                      |  6 +++---
 drivers/leds/leds-tca6507.c                      |  5 ++---
 drivers/leds/leds-tlc591xx.c                     |  5 ++---
 drivers/leds/leds-turris-omnia.c                 |  5 ++---
 drivers/macintosh/ams/ams-i2c.c                  |  8 +++-----
 drivers/macintosh/therm_adt746x.c                |  6 +++---
 drivers/macintosh/therm_windtunnel.c             |  5 +++--
 drivers/macintosh/windfarm_ad7417_sensor.c       |  5 ++---
 drivers/macintosh/windfarm_fcu_controls.c        |  5 ++---
 drivers/macintosh/windfarm_lm75_sensor.c         |  8 ++++----
 drivers/macintosh/windfarm_lm87_sensor.c         |  5 ++---
 drivers/macintosh/windfarm_max6690_sensor.c      |  5 ++---
 drivers/macintosh/windfarm_smu_sat.c             |  5 ++---
 drivers/media/dvb-frontends/a8293.c              |  5 ++---
 drivers/media/dvb-frontends/af9013.c             |  5 ++---
 drivers/media/dvb-frontends/af9033.c             |  5 ++---
 drivers/media/dvb-frontends/au8522_decoder.c     |  5 ++---
 drivers/media/dvb-frontends/cxd2099.c            |  5 ++---
 drivers/media/dvb-frontends/cxd2820r_core.c      |  5 ++---
 drivers/media/dvb-frontends/dvb-pll.c            |  5 +++--
 drivers/media/dvb-frontends/helene.c             |  5 ++---
 drivers/media/dvb-frontends/lgdt3306a.c          |  5 ++---
 drivers/media/dvb-frontends/lgdt330x.c           |  5 ++---
 drivers/media/dvb-frontends/m88ds3103.c          |  6 +++---
 drivers/media/dvb-frontends/mn88443x.c           |  6 +++---
 drivers/media/dvb-frontends/mn88472.c            |  5 ++---
 drivers/media/dvb-frontends/mn88473.c            |  5 ++---
 drivers/media/dvb-frontends/mxl692.c             |  5 ++---
 drivers/media/dvb-frontends/rtl2830.c            |  5 ++---
 drivers/media/dvb-frontends/rtl2832.c            |  5 ++---
 drivers/media/dvb-frontends/si2165.c             |  5 ++---
 drivers/media/dvb-frontends/si2168.c             |  5 ++---
 drivers/media/dvb-frontends/sp2.c                |  5 ++---
 drivers/media/dvb-frontends/stv090x.c            |  5 ++---
 drivers/media/dvb-frontends/stv6110x.c           |  5 ++---
 drivers/media/dvb-frontends/tc90522.c            |  6 +++---
 drivers/media/dvb-frontends/tda10071.c           |  5 ++---
 drivers/media/dvb-frontends/ts2020.c             |  5 ++---
 drivers/media/i2c/ad5820.c                       |  5 ++---
 drivers/media/i2c/ad9389b.c                      |  4 ++--
 drivers/media/i2c/adp1653.c                      |  5 ++---
 drivers/media/i2c/adv7170.c                      |  5 ++---
 drivers/media/i2c/adv7175.c                      |  5 ++---
 drivers/media/i2c/adv7180.c                      |  6 +++---
 drivers/media/i2c/adv7183.c                      |  5 ++---
 drivers/media/i2c/adv7393.c                      |  5 ++---
 drivers/media/i2c/adv7511-v4l2.c                 |  4 ++--
 drivers/media/i2c/adv7604.c                      |  6 +++---
 drivers/media/i2c/adv7842.c                      |  5 ++---
 drivers/media/i2c/ak881x.c                       |  5 ++---
 drivers/media/i2c/bt819.c                        |  5 ++---
 drivers/media/i2c/bt856.c                        |  5 ++---
 drivers/media/i2c/bt866.c                        |  5 ++---
 drivers/media/i2c/cs3308.c                       |  5 ++---
 drivers/media/i2c/cs5345.c                       |  5 ++---
 drivers/media/i2c/cs53l32a.c                     |  6 +++---
 drivers/media/i2c/cx25840/cx25840-core.c         |  5 ++---
 drivers/media/i2c/ir-kbd-i2c.c                   |  5 +++--
 drivers/media/i2c/ks0127.c                       |  4 ++--
 drivers/media/i2c/lm3560.c                       |  5 ++---
 drivers/media/i2c/lm3646.c                       |  5 ++---
 drivers/media/i2c/m52790.c                       |  5 ++---
 drivers/media/i2c/m5mols/m5mols_core.c           |  5 ++---
 drivers/media/i2c/ml86v7667.c                    |  5 ++---
 drivers/media/i2c/msp3400-driver.c               |  5 +++--
 drivers/media/i2c/mt9m032.c                      |  5 ++---
 drivers/media/i2c/mt9p031.c                      |  6 +++---
 drivers/media/i2c/mt9t001.c                      |  5 ++---
 drivers/media/i2c/mt9t112.c                      |  5 ++---
 drivers/media/i2c/mt9v011.c                      |  5 ++---
 drivers/media/i2c/mt9v032.c                      |  6 +++---
 drivers/media/i2c/noon010pc30.c                  |  5 ++---
 drivers/media/i2c/ov13858.c                      |  5 ++---
 drivers/media/i2c/ov6650.c                       |  5 ++---
 drivers/media/i2c/ov7640.c                       |  5 ++---
 drivers/media/i2c/ov7670.c                       |  6 +++---
 drivers/media/i2c/ov9640.c                       |  5 ++---
 drivers/media/i2c/rj54n1cb0c.c                   |  5 ++---
 drivers/media/i2c/s5k4ecgx.c                     |  5 ++---
 drivers/media/i2c/s5k6aa.c                       |  5 ++---
 drivers/media/i2c/saa6588.c                      |  5 ++---
 drivers/media/i2c/saa6752hs.c                    |  5 ++---
 drivers/media/i2c/saa7110.c                      |  5 ++---
 drivers/media/i2c/saa7115.c                      |  6 +++---
 drivers/media/i2c/saa7127.c                      |  6 +++---
 drivers/media/i2c/saa717x.c                      |  5 ++---
 drivers/media/i2c/saa7185.c                      |  5 ++---
 drivers/media/i2c/sony-btf-mpx.c                 |  5 ++---
 drivers/media/i2c/sr030pc30.c                    |  5 ++---
 drivers/media/i2c/tda1997x.c                     |  6 +++---
 drivers/media/i2c/tda7432.c                      |  5 ++---
 drivers/media/i2c/tda9840.c                      |  5 ++---
 drivers/media/i2c/tea6415c.c                     |  5 ++---
 drivers/media/i2c/tea6420.c                      |  5 ++---
 drivers/media/i2c/ths7303.c                      |  5 ++---
 drivers/media/i2c/tlv320aic23b.c                 |  5 ++---
 drivers/media/i2c/tvaudio.c                      |  5 +++--
 drivers/media/i2c/tvp514x.c                      |  5 +++--
 drivers/media/i2c/tw2804.c                       |  5 ++---
 drivers/media/i2c/tw9903.c                       |  5 ++---
 drivers/media/i2c/tw9906.c                       |  5 ++---
 drivers/media/i2c/tw9910.c                       |  5 ++---
 drivers/media/i2c/uda1342.c                      |  5 ++---
 drivers/media/i2c/upd64031a.c                    |  5 ++---
 drivers/media/i2c/upd64083.c                     |  5 ++---
 drivers/media/i2c/video-i2c.c                    |  6 +++---
 drivers/media/i2c/vp27smpx.c                     |  5 ++---
 drivers/media/i2c/vpx3220.c                      |  5 ++---
 drivers/media/i2c/vs6624.c                       |  5 ++---
 drivers/media/i2c/wm8739.c                       |  5 ++---
 drivers/media/i2c/wm8775.c                       |  5 ++---
 drivers/media/radio/radio-tea5764.c              |  5 ++---
 drivers/media/radio/saa7706h.c                   |  5 ++---
 drivers/media/radio/tef6862.c                    |  5 ++---
 drivers/media/test-drivers/vidtv/vidtv_demod.c   |  5 ++---
 drivers/media/test-drivers/vidtv/vidtv_tuner.c   |  5 ++---
 drivers/media/tuners/e4000.c                     |  5 ++---
 drivers/media/tuners/fc2580.c                    |  5 ++---
 drivers/media/tuners/m88rs6000t.c                |  5 ++---
 drivers/media/tuners/mt2060.c                    |  5 ++---
 drivers/media/tuners/mxl301rf.c                  |  5 ++---
 drivers/media/tuners/qm1d1b0004.c                |  4 ++--
 drivers/media/tuners/qm1d1c0042.c                |  5 ++---
 drivers/media/tuners/si2157.c                    |  6 +++---
 drivers/media/tuners/tda18212.c                  |  5 ++---
 drivers/media/tuners/tda18250.c                  |  5 ++---
 drivers/media/tuners/tua9001.c                   |  5 ++---
 drivers/media/usb/go7007/s2250-board.c           |  5 ++---
 drivers/media/v4l2-core/tuner-core.c             |  5 ++---
 drivers/mfd/88pm800.c                            |  5 ++---
 drivers/mfd/88pm805.c                            |  5 ++---
 drivers/mfd/aat2870-core.c                       |  5 ++---
 drivers/mfd/act8945a.c                           |  5 ++---
 drivers/mfd/adp5520.c                            |  6 +++---
 drivers/mfd/arizona-i2c.c                        |  6 +++---
 drivers/mfd/as3711.c                             |  5 ++---
 drivers/mfd/as3722.c                             |  5 ++---
 drivers/mfd/atc260x-i2c.c                        |  5 ++---
 drivers/mfd/axp20x-i2c.c                         |  5 ++---
 drivers/mfd/bcm590xx.c                           |  5 ++---
 drivers/mfd/bd9571mwv.c                          |  5 ++---
 drivers/mfd/da903x.c                             |  6 +++---
 drivers/mfd/da9052-i2c.c                         |  6 +++---
 drivers/mfd/da9055-i2c.c                         |  5 ++---
 drivers/mfd/da9062-core.c                        |  6 +++---
 drivers/mfd/da9063-i2c.c                         |  6 +++---
 drivers/mfd/da9150-core.c                        |  5 ++---
 drivers/mfd/khadas-mcu.c                         |  5 ++---
 drivers/mfd/lm3533-core.c                        |  5 ++---
 drivers/mfd/lp3943.c                             |  4 ++--
 drivers/mfd/lp873x.c                             |  5 ++---
 drivers/mfd/lp87565.c                            |  5 ++---
 drivers/mfd/lp8788.c                             |  4 ++--
 drivers/mfd/madera-i2c.c                         |  6 +++---
 drivers/mfd/max14577.c                           |  6 +++---
 drivers/mfd/max77620.c                           |  6 +++---
 drivers/mfd/max77693.c                           |  6 +++---
 drivers/mfd/max77843.c                           |  6 +++---
 drivers/mfd/max8907.c                            |  5 ++---
 drivers/mfd/max8925-i2c.c                        |  5 ++---
 drivers/mfd/max8997.c                            |  6 +++---
 drivers/mfd/max8998.c                            |  6 +++---
 drivers/mfd/mc13xxx-i2c.c                        |  6 +++---
 drivers/mfd/menelaus.c                           |  5 ++---
 drivers/mfd/menf21bmc.c                          |  4 ++--
 drivers/mfd/palmas.c                             |  5 ++---
 drivers/mfd/pcf50633-core.c                      |  5 ++---
 drivers/mfd/rc5t583.c                            |  5 ++---
 drivers/mfd/retu-mfd.c                           |  4 ++--
 drivers/mfd/rk808.c                              |  5 ++---
 drivers/mfd/rohm-bd718x7.c                       |  5 ++---
 drivers/mfd/rsmu_i2c.c                           |  6 +++---
 drivers/mfd/rt5033.c                             |  5 ++---
 drivers/mfd/sec-core.c                           |  5 ++---
 drivers/mfd/si476x-i2c.c                         |  6 +++---
 drivers/mfd/sky81452.c                           |  5 ++---
 drivers/mfd/stmfx.c                              |  5 ++---
 drivers/mfd/stmpe-i2c.c                          |  5 +++--
 drivers/mfd/stpmic1.c                            |  5 ++---
 drivers/mfd/stw481x.c                            |  5 ++---
 drivers/mfd/tc3589x.c                            |  6 +++---
 drivers/mfd/ti-lmu.c                             |  5 +++--
 drivers/mfd/tps6105x.c                           |  5 ++---
 drivers/mfd/tps65010.c                           |  6 +++---
 drivers/mfd/tps6507x.c                           |  5 ++---
 drivers/mfd/tps65086.c                           |  5 ++---
 drivers/mfd/tps65090.c                           |  5 ++---
 drivers/mfd/tps65218.c                           |  5 ++---
 drivers/mfd/tps6586x.c                           |  5 ++---
 drivers/mfd/tps65910.c                           |  6 +++---
 drivers/mfd/tps65912-i2c.c                       |  5 ++---
 drivers/mfd/twl-core.c                           |  5 +++--
 drivers/mfd/twl6040.c                            |  5 ++---
 drivers/mfd/wl1273-core.c                        |  5 ++---
 drivers/mfd/wm831x-i2c.c                         |  6 +++---
 drivers/mfd/wm8350-i2c.c                         |  5 ++---
 drivers/mfd/wm8400-core.c                        |  5 ++---
 drivers/mfd/wm8994-core.c                        |  6 +++---
 drivers/misc/ad525x_dpot-i2c.c                   |  6 +++---
 drivers/misc/apds9802als.c                       |  5 ++---
 drivers/misc/apds990x.c                          |  5 ++---
 drivers/misc/bh1770glc.c                         |  5 ++---
 drivers/misc/ds1682.c                            |  5 ++---
 drivers/misc/eeprom/eeprom.c                     |  5 ++---
 drivers/misc/eeprom/idt_89hpesx.c                |  4 ++--
 drivers/misc/eeprom/max6875.c                    |  5 ++---
 drivers/misc/hmc6352.c                           |  5 ++---
 drivers/misc/ics932s401.c                        |  8 +++-----
 drivers/misc/isl29003.c                          |  5 ++---
 drivers/misc/isl29020.c                          |  5 ++---
 drivers/misc/lis3lv02d/lis3lv02d_i2c.c           |  5 ++---
 drivers/misc/tsl2550.c                           |  5 ++---
 drivers/mtd/maps/pismo.c                         |  5 ++---
 drivers/net/dsa/lan9303_i2c.c                    |  5 ++---
 drivers/net/dsa/microchip/ksz9477_i2c.c          |  5 ++---
 drivers/net/dsa/xrs700x/xrs700x_i2c.c            |  5 ++---
 drivers/net/ethernet/mellanox/mlxsw/i2c.c        |  6 +++---
 drivers/nfc/microread/i2c.c                      |  5 ++---
 drivers/nfc/nfcmrvl/i2c.c                        |  5 ++---
 drivers/nfc/nxp-nci/i2c.c                        |  5 ++---
 drivers/nfc/pn533/i2c.c                          |  5 ++---
 drivers/nfc/pn544/i2c.c                          |  5 ++---
 drivers/nfc/s3fwrn5/i2c.c                        |  5 ++---
 drivers/nfc/st-nci/i2c.c                         |  5 ++---
 drivers/nfc/st21nfca/i2c.c                       |  5 ++---
 drivers/of/unittest.c                            | 10 ++++------
 drivers/pinctrl/pinctrl-mcp23s08_i2c.c           |  5 +++--
 drivers/pinctrl/pinctrl-sx150x.c                 |  6 +++---
 drivers/platform/chrome/cros_ec_i2c.c            |  5 ++---
 drivers/power/supply/adp5061.c                   |  5 ++---
 drivers/power/supply/bq2415x_charger.c           |  6 +++---
 drivers/power/supply/bq24190_charger.c           |  6 +++---
 drivers/power/supply/bq24257_charger.c           |  6 +++---
 drivers/power/supply/bq24735-charger.c           |  5 ++---
 drivers/power/supply/bq2515x_charger.c           |  6 +++---
 drivers/power/supply/bq256xx_charger.c           |  6 +++---
 drivers/power/supply/bq25890_charger.c           |  5 ++---
 drivers/power/supply/bq25980_charger.c           |  6 +++---
 drivers/power/supply/bq27xxx_battery_i2c.c       |  6 +++---
 drivers/power/supply/ds2782_battery.c            |  6 +++---
 drivers/power/supply/lp8727_charger.c            |  4 ++--
 drivers/power/supply/ltc2941-battery-gauge.c     |  5 ++---
 drivers/power/supply/ltc4162-l-charger.c         |  5 ++---
 drivers/power/supply/max14656_charger_detector.c |  5 ++---
 drivers/power/supply/max17040_battery.c          |  6 +++---
 drivers/power/supply/max17042_battery.c          |  6 +++---
 drivers/power/supply/rt5033_battery.c            |  5 ++---
 drivers/power/supply/rt9455_charger.c            |  5 ++---
 drivers/power/supply/sbs-charger.c               |  5 ++---
 drivers/power/supply/sbs-manager.c               |  6 +++---
 drivers/power/supply/smb347-charger.c            |  6 +++---
 drivers/power/supply/ucs1002_power.c             |  5 ++---
 drivers/power/supply/z2_battery.c                |  5 ++---
 drivers/pwm/pwm-pca9685.c                        |  5 ++---
 drivers/regulator/act8865-regulator.c            |  6 +++---
 drivers/regulator/ad5398.c                       |  6 +++---
 drivers/regulator/da9121-regulator.c             |  5 ++---
 drivers/regulator/fan53555.c                     |  6 +++---
 drivers/regulator/isl6271a-regulator.c           |  6 +++---
 drivers/regulator/lp3972.c                       |  5 ++---
 drivers/regulator/lp872x.c                       |  5 +++--
 drivers/regulator/lp8755.c                       |  5 ++---
 drivers/regulator/ltc3589.c                      |  6 +++---
 drivers/regulator/max1586.c                      |  5 ++---
 drivers/regulator/max8649.c                      |  5 ++---
 drivers/regulator/max8660.c                      |  6 +++---
 drivers/regulator/max8952.c                      |  5 ++---
 drivers/regulator/max8973-regulator.c            |  6 +++---
 drivers/regulator/pca9450-regulator.c            |  5 ++---
 drivers/regulator/pfuze100-regulator.c           |  6 +++---
 drivers/regulator/pv88080-regulator.c            |  6 +++---
 drivers/regulator/rpi-panel-attiny-regulator.c   |  5 ++---
 drivers/regulator/tps51632-regulator.c           |  5 ++---
 drivers/regulator/tps62360-regulator.c           |  6 +++---
 drivers/regulator/tps6286x-regulator.c           |  5 ++---
 drivers/regulator/tps65023-regulator.c           |  6 +++---
 drivers/rtc/rtc-ds1307.c                         |  6 +++---
 drivers/rtc/rtc-isl1208.c                        |  1 +
 drivers/rtc/rtc-m41t80.c                         |  1 +
 drivers/rtc/rtc-rs5c372.c                        |  1 +
 drivers/spi/spi-sc18is602.c                      |  6 +++---
 drivers/spi/spi-xcomm.c                          |  5 ++---
 drivers/staging/iio/addac/adt7316-i2c.c          |  6 +++---
 drivers/staging/iio/impedance-analyzer/ad5933.c  |  6 +++---
 drivers/staging/iio/meter/ade7854-i2c.c          |  5 ++---
 drivers/staging/most/i2c/i2c.c                   |  4 ++--
 drivers/staging/olpc_dcon/olpc_dcon.c            |  4 ++--
 drivers/tty/serial/sc16is7xx.c                   |  6 +++---
 drivers/usb/misc/usb251xb.c                      |  5 ++---
 drivers/usb/misc/usb3503.c                       |  5 ++---
 drivers/usb/misc/usb4604.c                       |  5 ++---
 drivers/usb/phy/phy-isp1301-omap.c               |  4 ++--
 drivers/usb/phy/phy-isp1301.c                    |  5 ++---
 drivers/usb/typec/anx7411.c                      |  5 ++---
 drivers/usb/typec/hd3ss3220.c                    |  5 ++---
 drivers/usb/typec/tcpm/fusb302.c                 |  5 ++---
 drivers/usb/typec/tcpm/tcpci.c                   |  5 ++---
 drivers/usb/typec/tcpm/tcpci_maxim.c             |  4 ++--
 drivers/usb/typec/tcpm/tcpci_rt1711h.c           |  5 ++---
 drivers/usb/typec/ucsi/ucsi_ccg.c                |  5 ++---
 drivers/usb/typec/ucsi/ucsi_stm32g0.c            |  4 ++--
 drivers/video/backlight/adp8860_bl.c             |  6 +++---
 drivers/video/backlight/adp8870_bl.c             |  6 +++---
 drivers/video/backlight/arcxcnn_bl.c             |  4 ++--
 drivers/video/backlight/bd6107.c                 |  5 ++---
 drivers/video/backlight/lm3630a_bl.c             |  5 ++---
 drivers/video/backlight/lm3639_bl.c              |  5 ++---
 drivers/video/backlight/lp855x_bl.c              |  5 +++--
 drivers/video/backlight/lv5207lp.c               |  5 ++---
 drivers/video/backlight/tosa_bl.c                |  5 ++---
 drivers/video/fbdev/matrox/matroxfb_maven.c      |  5 ++---
 drivers/w1/masters/ds2482.c                      |  5 ++---
 drivers/watchdog/ziirave_wdt.c                   |  5 ++---
 include/linux/i2c.h                              | 12 +++++++-----
 sound/aoa/codecs/onyx.c                          |  5 ++---
 sound/aoa/codecs/tas.c                           |  5 ++---
 sound/pci/hda/cs35l41_hda_i2c.c                  |  4 ++--
 sound/ppc/keywest.c                              |  5 ++---
 sound/soc/codecs/es8326.c                        |  5 ++---
 sound/soc/codecs/max98396.c                      |  6 +++---
 sound/soc/codecs/src4xxx-i2c.c                   |  5 ++---
 sound/soc/codecs/tas2780.c                       |  5 ++---
 607 files changed, 1429 insertions(+), 1790 deletions(-)


base-commit: 147307c69ba4441ee90c1f8ce8edf5df4ea60f67
-- 
2.38.1

[PATCH 290/606] macintosh: therm_adt746x: Convert to i2c's .probe_new()

From: Uwe Kleine-König <hidden>
Date: 2022-11-18 23:26:27

From: Uwe Kleine-König <redacted>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <redacted>
---
 drivers/macintosh/therm_adt746x.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index b004ea2a1102..8f5db9093c9a 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -464,9 +464,9 @@ static void thermostat_remove_files(struct thermostat *th)
 
 }
 
-static int probe_thermostat(struct i2c_client *client,
-			    const struct i2c_device_id *id)
+static int probe_thermostat(struct i2c_client *client)
 {
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
 	struct device_node *np = client->dev.of_node;
 	struct thermostat* th;
 	const __be32 *prop;
@@ -598,7 +598,7 @@ static struct i2c_driver thermostat_driver = {
 	.driver = {
 		.name	= "therm_adt746x",
 	},
-	.probe = probe_thermostat,
+	.probe_new = probe_thermostat,
 	.remove = remove_thermostat,
 	.id_table = therm_adt746x_id,
 };
-- 
2.38.1

[PATCH 597/606] ALSA: aoa: onyx: Convert to i2c's .probe_new()

From: Uwe Kleine-König <hidden>
Date: 2022-11-18 23:34:10

From: Uwe Kleine-König <redacted>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <redacted>
---
 sound/aoa/codecs/onyx.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/sound/aoa/codecs/onyx.c b/sound/aoa/codecs/onyx.c
index 2d0f904aba00..4c75381f5ab8 100644
--- a/sound/aoa/codecs/onyx.c
+++ b/sound/aoa/codecs/onyx.c
@@ -990,8 +990,7 @@ static void onyx_exit_codec(struct aoa_codec *codec)
 	onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
 }
 
-static int onyx_i2c_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
+static int onyx_i2c_probe(struct i2c_client *client)
 {
 	struct device_node *node = client->dev.of_node;
 	struct onyx *onyx;
@@ -1049,7 +1048,7 @@ static struct i2c_driver onyx_driver = {
 	.driver = {
 		.name = "aoa_codec_onyx",
 	},
-	.probe = onyx_i2c_probe,
+	.probe_new = onyx_i2c_probe,
 	.remove = onyx_i2c_remove,
 	.id_table = onyx_i2c_id,
 };
-- 
2.38.1

[PATCH 598/606] ALSA: aoa: tas: Convert to i2c's .probe_new()

From: Uwe Kleine-König <hidden>
Date: 2022-11-18 23:41:08

From: Uwe Kleine-König <redacted>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <redacted>
---
 sound/aoa/codecs/tas.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/sound/aoa/codecs/tas.c b/sound/aoa/codecs/tas.c
index ab89475b7715..f906e9aaddcf 100644
--- a/sound/aoa/codecs/tas.c
+++ b/sound/aoa/codecs/tas.c
@@ -875,8 +875,7 @@ static void tas_exit_codec(struct aoa_codec *codec)
 }
 
 
-static int tas_i2c_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int tas_i2c_probe(struct i2c_client *client)
 {
 	struct device_node *node = client->dev.of_node;
 	struct tas *tas;
@@ -937,7 +936,7 @@ static struct i2c_driver tas_driver = {
 	.driver = {
 		.name = "aoa_codec_tas",
 	},
-	.probe = tas_i2c_probe,
+	.probe_new = tas_i2c_probe,
 	.remove = tas_i2c_remove,
 	.id_table = tas_i2c_id,
 };
-- 
2.38.1

[PATCH 295/606] macintosh: windfarm_lm87_sensor: Convert to i2c's .probe_new()

From: Uwe Kleine-König <hidden>
Date: 2022-11-18 23:49:08

From: Uwe Kleine-König <redacted>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <redacted>
---
 drivers/macintosh/windfarm_lm87_sensor.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/macintosh/windfarm_lm87_sensor.c b/drivers/macintosh/windfarm_lm87_sensor.c
index 40d25463346e..f37a32c2070c 100644
--- a/drivers/macintosh/windfarm_lm87_sensor.c
+++ b/drivers/macintosh/windfarm_lm87_sensor.c
@@ -95,8 +95,7 @@ static const struct wf_sensor_ops wf_lm87_ops = {
 	.owner		= THIS_MODULE,
 };
 
-static int wf_lm87_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int wf_lm87_probe(struct i2c_client *client)
 {	
 	struct wf_lm87_sensor *lm;
 	const char *name = NULL, *loc;
@@ -173,7 +172,7 @@ static struct i2c_driver wf_lm87_driver = {
 		.name	= "wf_lm87",
 		.of_match_table = wf_lm87_of_id,
 	},
-	.probe		= wf_lm87_probe,
+	.probe_new	= wf_lm87_probe,
 	.remove		= wf_lm87_remove,
 	.id_table	= wf_lm87_id,
 };
-- 
2.38.1

[PATCH 291/606] macintosh: therm_windtunnel: Convert to i2c's .probe_new()

From: Uwe Kleine-König <hidden>
Date: 2022-11-18 23:51:14

From: Uwe Kleine-König <redacted>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <redacted>
---
 drivers/macintosh/therm_windtunnel.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index b8228ca40454..22b15efcc025 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -411,8 +411,9 @@ static const struct i2c_device_id therm_windtunnel_id[] = {
 MODULE_DEVICE_TABLE(i2c, therm_windtunnel_id);
 
 static int
-do_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+do_probe(struct i2c_client *cl)
 {
+	const struct i2c_device_id *id = i2c_client_get_device_id(cl);
 	struct i2c_adapter *adapter = cl->adapter;
 	int ret = 0;
 
@@ -441,7 +442,7 @@ static struct i2c_driver g4fan_driver = {
 	.driver = {
 		.name	= "therm_windtunnel",
 	},
-	.probe		= do_probe,
+	.probe_new	= do_probe,
 	.remove		= do_remove,
 	.id_table	= therm_windtunnel_id,
 };
-- 
2.38.1

[PATCH 297/606] macintosh: windfarm_smu_sat: Convert to i2c's .probe_new()

From: Uwe Kleine-König <hidden>
Date: 2022-11-18 23:53:06

From: Uwe Kleine-König <redacted>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <redacted>
---
 drivers/macintosh/windfarm_smu_sat.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index be5d4593db93..ebc4256a9e4a 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -189,8 +189,7 @@ static const struct wf_sensor_ops wf_sat_ops = {
 	.owner		= THIS_MODULE,
 };
 
-static int wf_sat_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int wf_sat_probe(struct i2c_client *client)
 {
 	struct device_node *dev = client->dev.of_node;
 	struct wf_sat *sat;
@@ -349,7 +348,7 @@ static struct i2c_driver wf_sat_driver = {
 		.name		= "wf_smu_sat",
 		.of_match_table = wf_sat_of_id,
 	},
-	.probe		= wf_sat_probe,
+	.probe_new	= wf_sat_probe,
 	.remove		= wf_sat_remove,
 	.id_table	= wf_sat_id,
 };
-- 
2.38.1

[PATCH 296/606] macintosh: windfarm_max6690_sensor: Convert to i2c's .probe_new()

From: Uwe Kleine-König <hidden>
Date: 2022-11-19 00:00:53

From: Uwe Kleine-König <redacted>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <redacted>
---
 drivers/macintosh/windfarm_max6690_sensor.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index c0d404ebc792..6c5ab657b6b3 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -60,8 +60,7 @@ static const struct wf_sensor_ops wf_max6690_ops = {
 	.owner		= THIS_MODULE,
 };
 
-static int wf_max6690_probe(struct i2c_client *client,
-			    const struct i2c_device_id *id)
+static int wf_max6690_probe(struct i2c_client *client)
 {
 	const char *name, *loc;
 	struct wf_6690_sensor *max;
@@ -129,7 +128,7 @@ static struct i2c_driver wf_max6690_driver = {
 		.name		= "wf_max6690",
 		.of_match_table = wf_max6690_of_id,
 	},
-	.probe		= wf_max6690_probe,
+	.probe_new	= wf_max6690_probe,
 	.remove		= wf_max6690_remove,
 	.id_table	= wf_max6690_id,
 };
-- 
2.38.1

[PATCH 294/606] macintosh: windfarm_lm75_sensor: Convert to i2c's .probe_new()

From: Uwe Kleine-König <hidden>
Date: 2022-11-19 00:01:26

From: Uwe Kleine-König <redacted>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <redacted>
---
 drivers/macintosh/windfarm_lm75_sensor.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 204661c8e918..24f0a444d312 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -87,9 +87,9 @@ static const struct wf_sensor_ops wf_lm75_ops = {
 	.owner		= THIS_MODULE,
 };
 
-static int wf_lm75_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{	
+static int wf_lm75_probe(struct i2c_client *client)
+{
+	const struct i2c_device_id *id = i2c_client_get_device_id(client);
 	struct wf_lm75_sensor *lm;
 	int rc, ds1775;
 	const char *name, *loc;
@@ -177,7 +177,7 @@ static struct i2c_driver wf_lm75_driver = {
 		.name	= "wf_lm75",
 		.of_match_table = wf_lm75_of_id,
 	},
-	.probe		= wf_lm75_probe,
+	.probe_new	= wf_lm75_probe,
 	.remove		= wf_lm75_remove,
 	.id_table	= wf_lm75_id,
 };
-- 
2.38.1

[PATCH 292/606] macintosh: windfarm_ad7417_sensor: Convert to i2c's .probe_new()

From: Uwe Kleine-König <hidden>
Date: 2022-11-19 00:04:17

From: Uwe Kleine-König <redacted>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <redacted>
---
 drivers/macintosh/windfarm_ad7417_sensor.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/macintosh/windfarm_ad7417_sensor.c b/drivers/macintosh/windfarm_ad7417_sensor.c
index c5c54a4ce91f..33b4723d235e 100644
--- a/drivers/macintosh/windfarm_ad7417_sensor.c
+++ b/drivers/macintosh/windfarm_ad7417_sensor.c
@@ -229,8 +229,7 @@ static void wf_ad7417_init_chip(struct wf_ad7417_priv *pv)
 	pv->config = config;
 }
 
-static int wf_ad7417_probe(struct i2c_client *client,
-			   const struct i2c_device_id *id)
+static int wf_ad7417_probe(struct i2c_client *client)
 {
 	struct wf_ad7417_priv *pv;
 	const struct mpu_data *mpu;
@@ -321,7 +320,7 @@ static struct i2c_driver wf_ad7417_driver = {
 		.name	= "wf_ad7417",
 		.of_match_table = wf_ad7417_of_id,
 	},
-	.probe		= wf_ad7417_probe,
+	.probe_new	= wf_ad7417_probe,
 	.remove		= wf_ad7417_remove,
 	.id_table	= wf_ad7417_id,
 };
-- 
2.38.1

[PATCH 293/606] macintosh: windfarm_fcu_controls: Convert to i2c's .probe_new()

From: Uwe Kleine-König <hidden>
Date: 2022-11-19 00:18:44

From: Uwe Kleine-König <redacted>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <redacted>
---
 drivers/macintosh/windfarm_fcu_controls.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/macintosh/windfarm_fcu_controls.c b/drivers/macintosh/windfarm_fcu_controls.c
index c5b1ca5bcd73..e027d889d7e8 100644
--- a/drivers/macintosh/windfarm_fcu_controls.c
+++ b/drivers/macintosh/windfarm_fcu_controls.c
@@ -514,8 +514,7 @@ static int wf_fcu_init_chip(struct wf_fcu_priv *pv)
 	return 0;
 }
 
-static int wf_fcu_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int wf_fcu_probe(struct i2c_client *client)
 {
 	struct wf_fcu_priv *pv;
 
@@ -590,7 +589,7 @@ static struct i2c_driver wf_fcu_driver = {
 		.name	= "wf_fcu",
 		.of_match_table = wf_fcu_of_id,
 	},
-	.probe		= wf_fcu_probe,
+	.probe_new	= wf_fcu_probe,
 	.remove		= wf_fcu_remove,
 	.id_table	= wf_fcu_id,
 };
-- 
2.38.1

[PATCH 289/606] macintosh: ams/ams-i2c: Convert to i2c's .probe_new()

From: Uwe Kleine-König <hidden>
Date: 2022-11-19 00:19:39

From: Uwe Kleine-König <redacted>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <redacted>
---
 drivers/macintosh/ams/ams-i2c.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/macintosh/ams/ams-i2c.c b/drivers/macintosh/ams/ams-i2c.c
index 3ded340699fb..a4a1035eb412 100644
--- a/drivers/macintosh/ams/ams-i2c.c
+++ b/drivers/macintosh/ams/ams-i2c.c
@@ -56,8 +56,7 @@ enum ams_i2c_cmd {
 	AMS_CMD_START,
 };
 
-static int ams_i2c_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id);
+static int ams_i2c_probe(struct i2c_client *client);
 static void ams_i2c_remove(struct i2c_client *client);
 
 static const struct i2c_device_id ams_id[] = {
@@ -70,7 +69,7 @@ static struct i2c_driver ams_i2c_driver = {
 	.driver = {
 		.name   = "ams",
 	},
-	.probe          = ams_i2c_probe,
+	.probe_new      = ams_i2c_probe,
 	.remove         = ams_i2c_remove,
 	.id_table       = ams_id,
 };
@@ -155,8 +154,7 @@ static void ams_i2c_get_xyz(s8 *x, s8 *y, s8 *z)
 	*z = ams_i2c_read(AMS_DATAZ);
 }
 
-static int ams_i2c_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int ams_i2c_probe(struct i2c_client *client)
 {
 	int vmaj, vmin;
 	int result;
-- 
2.38.1

Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: patchwork-bot+chrome-platform@kernel.org
Date: 2022-11-19 06:50:40

Hello:

This patch was applied to chrome-platform/linux.git (for-kernelci)
by Tzung-Bi Shih [off-list ref]:

On Fri, 18 Nov 2022 23:35:34 +0100 you wrote:
Hello,

since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Here is the summary with links:
  - [512/606] platform/chrome: cros_ec: Convert to i2c's .probe_new()
    https://git.kernel.org/chrome-platform/c/f9e510dc92df

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: patchwork-bot+chrome-platform@kernel.org
Date: 2022-11-19 06:50:49

Hello:

This patch was applied to chrome-platform/linux.git (for-next)
by Tzung-Bi Shih [off-list ref]:

On Fri, 18 Nov 2022 23:35:34 +0100 you wrote:
Hello,

since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Here is the summary with links:
  - [512/606] platform/chrome: cros_ec: Convert to i2c's .probe_new()
    https://git.kernel.org/chrome-platform/c/f9e510dc92df

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH 289/606] macintosh: ams/ams-i2c: Convert to i2c's .probe_new()

From: Christophe Leroy <hidden>
Date: 2022-11-19 07:39:09


Le 18/11/2022 à 23:40, Uwe Kleine-König a écrit :
From: Uwe Kleine-König <redacted>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <redacted>
The patch itself and the others seems ok. But can you group all 
macintosh changes into a single patch instead of the 9 patches you sent ?

See the process about submitting patches, 
https://docs.kernel.org/process/submitting-patches.html and especially 
the "NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org 
people!" and the associated reference 
https://lore.kernel.org/all/20050711.125305.08322243.davem@davemloft.net/ :

	If you feel the need to send, say, more than 15 patches at once, 
reconsider.

Thanks
Christophe
quoted hunk
---
  drivers/macintosh/ams/ams-i2c.c | 8 +++-----
  1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/macintosh/ams/ams-i2c.c b/drivers/macintosh/ams/ams-i2c.c
index 3ded340699fb..a4a1035eb412 100644
--- a/drivers/macintosh/ams/ams-i2c.c
+++ b/drivers/macintosh/ams/ams-i2c.c
@@ -56,8 +56,7 @@ enum ams_i2c_cmd {
  	AMS_CMD_START,
  };
  
-static int ams_i2c_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id);
+static int ams_i2c_probe(struct i2c_client *client);
  static void ams_i2c_remove(struct i2c_client *client);
  
  static const struct i2c_device_id ams_id[] = {
@@ -70,7 +69,7 @@ static struct i2c_driver ams_i2c_driver = {
  	.driver = {
  		.name   = "ams",
  	},
-	.probe          = ams_i2c_probe,
+	.probe_new      = ams_i2c_probe,
  	.remove         = ams_i2c_remove,
  	.id_table       = ams_id,
  };
@@ -155,8 +154,7 @@ static void ams_i2c_get_xyz(s8 *x, s8 *y, s8 *z)
  	*z = ams_i2c_read(AMS_DATAZ);
  }
  
-static int ams_i2c_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int ams_i2c_probe(struct i2c_client *client)
  {
  	int vmaj, vmin;
  	int result;

Re: [PATCH 597/606] ALSA: aoa: onyx: Convert to i2c's .probe_new()

From: Takashi Iwai <hidden>
Date: 2022-11-19 08:45:00

On Fri, 18 Nov 2022 23:45:31 +0100,
Uwe Kleine-König wrote:
From: Uwe Kleine-König <redacted>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <redacted>
Applied now to for-next branch.


thanks,

Takashi

Re: [PATCH 598/606] ALSA: aoa: tas: Convert to i2c's .probe_new()

From: Takashi Iwai <hidden>
Date: 2022-11-19 08:45:25

On Fri, 18 Nov 2022 23:45:32 +0100,
Uwe Kleine-König wrote:
From: Uwe Kleine-König <redacted>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <redacted>
Applied to for-next branch.


thanks,

Takashi

Re: [PATCH 289/606] macintosh: ams/ams-i2c: Convert to i2c's .probe_new()

From: Uwe Kleine-König <hidden>
Date: 2022-11-19 10:16:35

Hello Christophe,

On Sat, Nov 19, 2022 at 07:38:58AM +0000, Christophe Leroy wrote:
Le 18/11/2022 à 23:40, Uwe Kleine-König a écrit :
quoted
From: Uwe Kleine-König <redacted>

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <redacted>
The patch itself and the others seems ok. But can you group all 
macintosh changes into a single patch instead of the 9 patches you sent ?

See the process about submitting patches, 
https://docs.kernel.org/process/submitting-patches.html and especially 
the "NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org 
people!" and the associated reference 
https://lore.kernel.org/all/20050711.125305.08322243.davem@davemloft.net/ :

	If you feel the need to send, say, more than 15 patches at once, 
reconsider.
Thanks for your feedback.

Let me point out in response to the request to squash patches together
that this wish doesn't seem to be the universal right thing to do.

Last time I did a conversion grouped by subsystem, one of the replies
was:

	Reviewed-by: ...
	if you split on per driver basis.

(https://lore.kernel.org/linux-iio/20220808085526.280066-1-u.kleine-koenig@pengutronix.de)

The obvious upside of a split per driver is that the individual bits are
easier to review, an Ack can be limited to a certain set of drivers, and
(probably most important): If a driver later gets a commit that needs
backporting, a patch that only touches this single driver can more
easily be backported as a dependency.

Also the request to not send everything at once but keep back some
patches has an obvious downside. I.e. I have to restart yet more often
to rebase + test to get all patches applied in the end. And you could
argue that the sum of the work load on the mail servers doesn't get
smaller in sum if the 600 patches are sent over (say) 2 months.
(To prevent a flame war here: Yeah, I agree there are downsides of a
single big series, too.)

All in all my personal opinion is that the advantages of a split per
driver slightly outweight the disadvantages. But obviously that's
subjective.

I will wait a while before sending updates to this series, so don't
expect a new patch very soon. (This has the nice effect that it gives
you some time to reconsider your argument and maybe apply the patches as
they are now, preventing another mail to the lists with the cumulated
macintosh changes ;-)

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Wolfram Sang <wsa@kernel.org>
Date: 2022-11-19 11:10:25

Hi Uwe,
This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
Thanks for this work, really, but oh my poor inbox...
I don't think it's feasable to apply this series in one go, so I ask the
maintainers of the changed files to apply via their tree.
This seems reasonable. It would have made sense to send "patch series
per subsystem" then. So people only see the subset they are interested
in. I know filename-to-subsys mapping is hardly ever perfect. But in my
experience, even imperfect, it is more convenient than such a huge patch
series.

Happy hacking,

   Wolfram

Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Sebastian Reichel <hidden>
Date: 2022-11-20 19:43:56

Hi,

On Fri, Nov 18, 2022 at 11:35:34PM +0100, Uwe Kleine-König wrote:
Hello,

since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

	https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/client_device_id_helper-immutable

I don't think it's feasable to apply this series in one go, so I ask the
maintainers of the changed files to apply via their tree. I guess it
will take a few kernel release iterations until all patch are in, but I
think a single tree creates too much conflicts.

The last patch changes i2c_driver::probe, all non-converted drivers will
fail to compile then. So I hope the build bots will tell me about any
driver I missed to convert. This patch is obviously not for application
now.

I dropped most individuals from the recipents of this mail to not
challenge the mail servers and mailing list filters too much. Sorry if
you had extra efforts to find this mail.

Best regards
Uwe
...
  power: supply: adp5061: Convert to i2c's .probe_new()
  power: supply: bq2415x: Convert to i2c's .probe_new()
  power: supply: bq24190: Convert to i2c's .probe_new()
  power: supply: bq24257: Convert to i2c's .probe_new()
  power: supply: bq24735: Convert to i2c's .probe_new()
  power: supply: bq2515x: Convert to i2c's .probe_new()
  power: supply: bq256xx: Convert to i2c's .probe_new()
  power: supply: bq25890: Convert to i2c's .probe_new()
  power: supply: bq25980: Convert to i2c's .probe_new()
  power: supply: bq27xxx: Convert to i2c's .probe_new()
  power: supply: ds2782: Convert to i2c's .probe_new()
  power: supply: lp8727: Convert to i2c's .probe_new()
  power: supply: ltc2941: Convert to i2c's .probe_new()
  power: supply: ltc4162-l: Convert to i2c's .probe_new()
  power: supply: max14656: Convert to i2c's .probe_new()
  power: supply: max17040: Convert to i2c's .probe_new()
  power: supply: max17042_battery: Convert to i2c's .probe_new()
  power: supply: rt5033_battery: Convert to i2c's .probe_new()
  power: supply: rt9455: Convert to i2c's .probe_new()
  power: supply: sbs: Convert to i2c's .probe_new()
  power: supply: sbs-manager: Convert to i2c's .probe_new()
  power: supply: smb347: Convert to i2c's .probe_new()
  power: supply: ucs1002: Convert to i2c's .probe_new()
  power: supply: z2_battery: Convert to i2c's .probe_new()
  [...]
Thanks, I queued patches 513-536 to the power-supply subsystem.

-- Sebastian

Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Lee Jones <lee@kernel.org>
Date: 2022-11-21 09:54:14

On Fri, 18 Nov 2022, Uwe Kleine-König wrote:
Hello,

since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.
Oh yeah, this!  Thanks for picking this up Uwe, I guess I've been
distracted for the past 6 years or so. :)
This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

	https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/client_device_id_helper-immutable

I don't think it's feasable to apply this series in one go, so I ask the
maintainers of the changed files to apply via their tree. I guess it
will take a few kernel release iterations until all patch are in, but I
think a single tree creates too much conflicts.

The last patch changes i2c_driver::probe, all non-converted drivers will
fail to compile then. So I hope the build bots will tell me about any
driver I missed to convert. This patch is obviously not for application
now.

I dropped most individuals from the recipents of this mail to not
challenge the mail servers and mailing list filters too much. Sorry if
you had extra efforts to find this mail.
[...]
 drivers/mfd/88pm800.c                            |  5 ++---
 drivers/mfd/88pm805.c                            |  5 ++---
 drivers/mfd/aat2870-core.c                       |  5 ++---
 drivers/mfd/act8945a.c                           |  5 ++---
 drivers/mfd/adp5520.c                            |  6 +++---
 drivers/mfd/arizona-i2c.c                        |  6 +++---
 drivers/mfd/as3711.c                             |  5 ++---
 drivers/mfd/as3722.c                             |  5 ++---
 drivers/mfd/atc260x-i2c.c                        |  5 ++---
 drivers/mfd/axp20x-i2c.c                         |  5 ++---
 drivers/mfd/bcm590xx.c                           |  5 ++---
 drivers/mfd/bd9571mwv.c                          |  5 ++---
 drivers/mfd/da903x.c                             |  6 +++---
 drivers/mfd/da9052-i2c.c                         |  6 +++---
 drivers/mfd/da9055-i2c.c                         |  5 ++---
 drivers/mfd/da9062-core.c                        |  6 +++---
 drivers/mfd/da9063-i2c.c                         |  6 +++---
 drivers/mfd/da9150-core.c                        |  5 ++---
 drivers/mfd/khadas-mcu.c                         |  5 ++---
 drivers/mfd/lm3533-core.c                        |  5 ++---
 drivers/mfd/lp3943.c                             |  4 ++--
 drivers/mfd/lp873x.c                             |  5 ++---
 drivers/mfd/lp87565.c                            |  5 ++---
 drivers/mfd/lp8788.c                             |  4 ++--
 drivers/mfd/madera-i2c.c                         |  6 +++---
 drivers/mfd/max14577.c                           |  6 +++---
 drivers/mfd/max77620.c                           |  6 +++---
 drivers/mfd/max77693.c                           |  6 +++---
 drivers/mfd/max77843.c                           |  6 +++---
 drivers/mfd/max8907.c                            |  5 ++---
 drivers/mfd/max8925-i2c.c                        |  5 ++---
 drivers/mfd/max8997.c                            |  6 +++---
 drivers/mfd/max8998.c                            |  6 +++---
 drivers/mfd/mc13xxx-i2c.c                        |  6 +++---
 drivers/mfd/menelaus.c                           |  5 ++---
 drivers/mfd/menf21bmc.c                          |  4 ++--
 drivers/mfd/palmas.c                             |  5 ++---
 drivers/mfd/pcf50633-core.c                      |  5 ++---
 drivers/mfd/rc5t583.c                            |  5 ++---
 drivers/mfd/retu-mfd.c                           |  4 ++--
 drivers/mfd/rk808.c                              |  5 ++---
 drivers/mfd/rohm-bd718x7.c                       |  5 ++---
 drivers/mfd/rsmu_i2c.c                           |  6 +++---
 drivers/mfd/rt5033.c                             |  5 ++---
 drivers/mfd/sec-core.c                           |  5 ++---
 drivers/mfd/si476x-i2c.c                         |  6 +++---
 drivers/mfd/sky81452.c                           |  5 ++---
 drivers/mfd/stmfx.c                              |  5 ++---
 drivers/mfd/stmpe-i2c.c                          |  5 +++--
 drivers/mfd/stpmic1.c                            |  5 ++---
 drivers/mfd/stw481x.c                            |  5 ++---
 drivers/mfd/tc3589x.c                            |  6 +++---
 drivers/mfd/ti-lmu.c                             |  5 +++--
 drivers/mfd/tps6105x.c                           |  5 ++---
 drivers/mfd/tps65010.c                           |  6 +++---
 drivers/mfd/tps6507x.c                           |  5 ++---
 drivers/mfd/tps65086.c                           |  5 ++---
 drivers/mfd/tps65090.c                           |  5 ++---
 drivers/mfd/tps65218.c                           |  5 ++---
 drivers/mfd/tps6586x.c                           |  5 ++---
 drivers/mfd/tps65910.c                           |  6 +++---
 drivers/mfd/tps65912-i2c.c                       |  5 ++---
 drivers/mfd/twl-core.c                           |  5 +++--
 drivers/mfd/twl6040.c                            |  5 ++---
 drivers/mfd/wl1273-core.c                        |  5 ++---
 drivers/mfd/wm831x-i2c.c                         |  6 +++---
 drivers/mfd/wm8350-i2c.c                         |  5 ++---
 drivers/mfd/wm8400-core.c                        |  5 ++---
 drivers/mfd/wm8994-core.c                        |  6 +++---
For my own reference (apply this as-is to your sign-off block):

  Acked-for-MFD-by: Lee Jones [off-list ref]
 drivers/video/backlight/adp8860_bl.c             |  6 +++---
 drivers/video/backlight/adp8870_bl.c             |  6 +++---
 drivers/video/backlight/arcxcnn_bl.c             |  4 ++--
 drivers/video/backlight/bd6107.c                 |  5 ++---
 drivers/video/backlight/lm3630a_bl.c             |  5 ++---
 drivers/video/backlight/lm3639_bl.c              |  5 ++---
 drivers/video/backlight/lp855x_bl.c              |  5 +++--
 drivers/video/backlight/lv5207lp.c               |  5 ++---
 drivers/video/backlight/tosa_bl.c                |  5 ++---
 drivers/video/fbdev/matrox/matroxfb_maven.c      |  5 ++---
For my own reference (apply this as-is to your sign-off block):

  Acked-for-Backlight-by: Lee Jones [off-list ref]

-- 
Lee Jones [李琼斯]

Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Jonathan Cameron <jic23@kernel.org>
Date: 2022-11-22 18:46:01

Queued all of the below:
with one tweaked as per your suggestion and the highlighted one dropped on basis
I was already carrying the equivalent - as you pointed out.

I was already carrying the required dependency.

Includes the IIO ones in staging.

Thanks,

Jonathan

p.s. I perhaps foolishly did this in a highly manual way so as to
also pick up Andy's RB.  So might have dropped one...

Definitely would have been better as one patch per subsystem with
a cover letter suitable for replies like Andy's to be picked up
by b4.

  iio: accel: adxl372_i2c: Convert to i2c's .probe_new()
  iio: accel: bma180: Convert to i2c's .probe_new()
  iio: accel: bma400: Convert to i2c's .probe_new()
  iio: accel: bmc150: Convert to i2c's .probe_new()
  iio: accel: da280: Convert to i2c's .probe_new()
  iio: accel: kxcjk-1013: Convert to i2c's .probe_new()
  iio: accel: mma7455_i2c: Convert to i2c's .probe_new()
  iio: accel: mma8452: Convert to i2c's .probe_new()
  iio: accel: mma9551: Convert to i2c's .probe_new()
  iio: accel: mma9553: Convert to i2c's .probe_new()
  iio: adc: ad7091r5: Convert to i2c's .probe_new()
  iio: adc: ad7291: Convert to i2c's .probe_new()
  iio: adc: ad799x: Convert to i2c's .probe_new()
  iio: adc: ina2xx-adc: Convert to i2c's .probe_new()
  iio: adc: ltc2471: Convert to i2c's .probe_new()
  iio: adc: ltc2485: Convert to i2c's .probe_new()
  iio: adc: ltc2497: Convert to i2c's .probe_new()
  iio: adc: max1363: Convert to i2c's .probe_new()
  iio: adc: max9611: Convert to i2c's .probe_new()
  iio: adc: mcp3422: Convert to i2c's .probe_new()
  iio: adc: ti-adc081c: Convert to i2c's .probe_new()
  iio: adc: ti-ads1015: Convert to i2c's .probe_new()
  iio: cdc: ad7150: Convert to i2c's .probe_new()
  iio: cdc: ad7746: Convert to i2c's .probe_new()
  iio: chemical: ams-iaq-core: Convert to i2c's .probe_new()
  iio: chemical: atlas-ezo-sensor: Convert to i2c's .probe_new()
  iio: chemical: atlas-sensor: Convert to i2c's .probe_new()
  iio: chemical: bme680_i2c: Convert to i2c's .probe_new()
  iio: chemical: ccs811: Convert to i2c's .probe_new()
  iio: chemical: scd4x: Convert to i2c's .probe_new()
  iio: chemical: sgp30: Convert to i2c's .probe_new()
  iio: chemical: sgp40: Convert to i2c's .probe_new()
  iio: chemical: vz89x: Convert to i2c's .probe_new()
  iio: dac: ad5064: Convert to i2c's .probe_new()
  iio: dac: ad5380: Convert to i2c's .probe_new()
  iio: dac: ad5446: Convert to i2c's .probe_new()
  iio: dac: ad5593r: Convert to i2c's .probe_new()
  iio: dac: ad5696-i2c: Convert to i2c's .probe_new()
  iio: dac: ds4424: Convert to i2c's .probe_new()
  iio: dac: m62332: Convert to i2c's .probe_new()
  iio: dac: max517: Convert to i2c's .probe_new()
  iio: dac: max5821: Convert to i2c's .probe_new()
  iio: dac: mcp4725: Convert to i2c's .probe_new()
  iio: dac: ti-dac5571: Convert to i2c's .probe_new()
  iio: gyro: bmg160_i2c: Convert to i2c's .probe_new()
  iio: gyro: itg3200_core: Convert to i2c's .probe_new()
  iio: gyro: mpu3050-i2c: Convert to i2c's .probe_new()
  iio: gyro: st_gyro_i2c: Convert to i2c's .probe_new()
  iio: health: afe4404: Convert to i2c's .probe_new()
  iio: health: max30100: Convert to i2c's .probe_new()
  iio: health: max30102: Convert to i2c's .probe_new()
  iio: humidity: am2315: Convert to i2c's .probe_new()
  iio: humidity: hdc100x: Convert to i2c's .probe_new()
  iio: humidity: hdc2010: Convert to i2c's .probe_new()
  iio: humidity: hts221_i2c: Convert to i2c's .probe_new()
  iio: humidity: htu21: Convert to i2c's .probe_new()
  iio: humidity: si7005: Convert to i2c's .probe_new()
  iio: humidity: si7020: Convert to i2c's .probe_new()
  iio: imu: bmi160/bmi160_i2c: Convert to i2c's .probe_new()
  iio: imu: fxos8700_i2c: Convert to i2c's .probe_new()
  iio: imu: inv_mpu6050: Convert to i2c's .probe_new()
  iio: imu: kmx61: Convert to i2c's .probe_new()
  iio: imu: st_lsm6dsx: Convert to i2c's .probe_new()
  iio: light: adjd_s311: Convert to i2c's .probe_new()
  iio: light: adux1020: Convert to i2c's .probe_new()
  iio: light: al3010: Convert to i2c's .probe_new()
  iio: light: al3320a: Convert to i2c's .probe_new()
  iio: light: apds9300: Convert to i2c's .probe_new()
  iio: light: apds9960: Convert to i2c's .probe_new()
  iio: light: bh1750: Convert to i2c's .probe_new()
  iio: light: bh1780: Convert to i2c's .probe_new()
  iio: light: cm3232: Convert to i2c's .probe_new()
  iio: light: cm3323: Convert to i2c's .probe_new()
  iio: light: cm36651: Convert to i2c's .probe_new()
  iio: light: gp2ap002: Convert to i2c's .probe_new()
  iio: light: gp2ap020a00f: Convert to i2c's .probe_new()
  iio: light: isl29018: Convert to i2c's .probe_new()
  iio: light: isl29028: Convert to i2c's .probe_new()
  iio: light: isl29125: Convert to i2c's .probe_new()
  iio: light: jsa1212: Convert to i2c's .probe_new()
  iio: light: ltr501: Convert to i2c's .probe_new()
  iio: light: lv0104cs: Convert to i2c's .probe_new()
  iio: light: max44000: Convert to i2c's .probe_new()
  iio: light: max44009: Convert to i2c's .probe_new()
  iio: light: noa1305: Convert to i2c's .probe_new()
  iio: light: opt3001: Convert to i2c's .probe_new()
  iio: light: pa12203001: Convert to i2c's .probe_new()
  iio: light: rpr0521: Convert to i2c's .probe_new()
  iio: light: si1133: Convert to i2c's .probe_new()
  iio: light: si1145: Convert to i2c's .probe_new()
  iio: light: st_uvis25_i2c: Convert to i2c's .probe_new()
  iio: light: stk3310: Convert to i2c's .probe_new()
  iio: light: tcs3414: Convert to i2c's .probe_new()
  iio: light: tcs3472: Convert to i2c's .probe_new()
  iio: light: tsl2563: Convert to i2c's .probe_new()
  iio: light: tsl2583: Convert to i2c's .probe_new()
  iio: light: tsl2772: Convert to i2c's .probe_new()
  iio: light: tsl4531: Convert to i2c's .probe_new()
  iio: light: us5182d: Convert to i2c's .probe_new()
  iio: light: vcnl4000: Convert to i2c's .probe_new()
  iio: light: vcnl4035: Convert to i2c's .probe_new()
  iio: light: veml6030: Convert to i2c's .probe_new()
  iio: light: veml6070: Convert to i2c's .probe_new()
  iio: light: zopt2201: Convert to i2c's .probe_new()
  iio: magnetometer: ak8974: Convert to i2c's .probe_new()
  iio: magnetometer: ak8975: Convert to i2c's .probe_new()
  iio: magnetometer: bmc150_magn_i2c: Convert to i2c's .probe_new()
  iio: magnetometer: hmc5843: Convert to i2c's .probe_new()
  iio: magnetometer: mag3110: Convert to i2c's .probe_new()
  iio: magnetometer: mmc35240: Convert to i2c's .probe_new()
  iio: magnetometer: yamaha-yas530: Convert to i2c's .probe_new()
  iio: potentiometer: ad5272: Convert to i2c's .probe_new()
  iio: potentiometer: ds1803: Convert to i2c's .probe_new()
  iio: potentiometer: max5432: Convert to i2c's .probe_new()
  iio: potentiometer: tpl0102: Convert to i2c's .probe_new()
  iio: potentiostat: lmp91000: Convert to i2c's .probe_new()
  iio: pressure: abp060mg: Convert to i2c's .probe_new()
Not this one > iio: pressure: bmp280-i2c: Convert to i2c's .probe_new()
  iio: pressure: dlhl60d: Convert to i2c's .probe_new()
  iio: pressure: dps310: Convert to i2c's .probe_new()
  iio: pressure: hp03: Convert to i2c's .probe_new()
  iio: pressure: hp206c: Convert to i2c's .probe_new()
  iio: pressure: icp10100: Convert to i2c's .probe_new()
  iio: pressure: mpl115_i2c: Convert to i2c's .probe_new()
  iio: pressure: mpl3115: Convert to i2c's .probe_new()
  iio: pressure: ms5611_i2c: Convert to i2c's .probe_new()
  iio: pressure: ms5637: Convert to i2c's .probe_new()
  iio: pressure: st_pressure_i2c: Convert to i2c's .probe_new()
  iio: pressure: t5403: Convert to i2c's .probe_new()
  iio: pressure: zpa2326_i2c: Convert to i2c's .probe_new()
  iio: proximity: isl29501: Convert to i2c's .probe_new()
  iio: proximity: mb1232: Convert to i2c's .probe_new()
  iio: proximity: pulsedlight-lidar-lite-v2: Convert to i2c's
    .probe_new()
  iio: proximity: rfd77402: Convert to i2c's .probe_new()
  iio: proximity: srf08: Convert to i2c's .probe_new()
  iio: proximity: sx9500: Convert to i2c's .probe_new()
  iio: temperature: mlx90614: Convert to i2c's .probe_new()
  iio: temperature: mlx90632: Convert to i2c's .probe_new()
  iio: temperature: tmp006: Convert to i2c's .probe_new()
  iio: temperature: tmp007: Convert to i2c's .probe_new()
  iio: temperature: tsys01: Convert to i2c's .probe_new()
  iio: temperature: tsys02d: Convert to i2c's .probe_new()
...
  staging: iio: adt7316: Convert to i2c's .probe_new()
  staging: iio: ad5933: Convert to i2c's .probe_new()
  staging: iio: ade7854: Convert to i2c's .probe_new()
 

Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Uwe Kleine-König <hidden>
Date: 2022-11-22 20:18:25

On Tue, Nov 22, 2022 at 06:58:18PM +0000, Jonathan Cameron wrote:
Queued all of the below:
with one tweaked as per your suggestion and the highlighted one dropped on basis
I was already carrying the equivalent - as you pointed out.

I was already carrying the required dependency.

Includes the IIO ones in staging.

Thanks,

Jonathan

p.s. I perhaps foolishly did this in a highly manual way so as to
also pick up Andy's RB.  So might have dropped one...
You could have done:

	H=$(git rev-parse @)
	b4 am -P 49-190 20221118224540.619276-1-uwe@kleine-koenig.org
	git am ...
	git filter-branch -f --msg-filter "grep -v 'Signed-off-by: Jonathan'; echo 'Reviewed-by: Andy Shevchenko [off-list ref]'; echo 'Signed-off-by: Jonathan Cameron [off-list ref]'" $H..

(untested, but you get the idea).
Definitely would have been better as one patch per subsystem with
a cover letter suitable for replies like Andy's to be picked up
by b4.
Next time I will go for one series per subsystem which I like better
than one patch per subsystem.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Mark Brown <broonie@kernel.org>
Date: 2022-11-23 12:13:43

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[538/606] regulator: act8865-regulator: Convert to i2c's .probe_new()
          (no commit info)
[539/606] regulator: ad5398: Convert to i2c's .probe_new()
          (no commit info)
[540/606] regulator: da9121-regulator: Convert to i2c's .probe_new()
          commit: 020cf73b47414a84b666d3e6736a6ae957e27840
[541/606] regulator: fan53555: Convert to i2c's .probe_new()
          (no commit info)
[542/606] regulator: isl6271a-regulator: Convert to i2c's .probe_new()
          (no commit info)
[543/606] regulator: lp3972: Convert to i2c's .probe_new()
          commit: 2532d5f8d5c20d5a0a8a0d57a311bc5df00dea04
[544/606] regulator: lp872x: Convert to i2c's .probe_new()
          (no commit info)
[545/606] regulator: lp8755: Convert to i2c's .probe_new()
          commit: cb28f74b4809a00b40fdf0c44ccf51ab950581d3
[546/606] regulator: ltc3589: Convert to i2c's .probe_new()
          (no commit info)
[547/606] regulator: max1586: Convert to i2c's .probe_new()
          commit: 3d54f7ba248b0ad1791bc356e9ad3d9020a1c472
[548/606] regulator: max8649: Convert to i2c's .probe_new()
          commit: 3cf4417385d0ac8f02f22888e12a6d21d97d89fc
[549/606] regulator: max8660: Convert to i2c's .probe_new()
          (no commit info)
[550/606] regulator: max8952: Convert to i2c's .probe_new()
          commit: c20c36735949b3b7984692fbab3d92b0e8a845ec
[551/606] regulator: max8973-regulator: Convert to i2c's .probe_new()
          (no commit info)
[552/606] regulator: pca9450-regulator: Convert to i2c's .probe_new()
          commit: ed56fa6e804cb13bbe29e9214792308817f6e553
[553/606] regulator: pfuze100-regulator: Convert to i2c's .probe_new()
          (no commit info)
[554/606] regulator: pv88080-regulator: Convert to i2c's .probe_new()
          (no commit info)
[555/606] regulator: rpi-panel-attiny-regulator: Convert to i2c's .probe_new()
          commit: d85d02d17a608b558d44510e9824668c5d4fe5d8
[556/606] regulator: tps51632-regulator: Convert to i2c's .probe_new()
          commit: d4885f306304ff29eec06b9ad5f526a1099e0418
[557/606] regulator: tps62360-regulator: Convert to i2c's .probe_new()
          (no commit info)
[558/606] regulator: tps6286x-regulator: Convert to i2c's .probe_new()
          commit: e34782316281c78c5911f86d4699d4f35a607c9d
[559/606] regulator: tps65023-regulator: Convert to i2c's .probe_new()
          (no commit info)

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Mark Brown <broonie@kernel.org>
Date: 2022-11-23 17:35:30

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[539/606] regulator: ad5398: Convert to i2c's .probe_new()
          commit: 7f69edba960bbdcbc829d8d0995b1117ce29e8b1
[544/606] regulator: lp872x: Convert to i2c's .probe_new()
          commit: 87feccb347b25f5dc6ff451123b832c9ad5dddfe
[546/606] regulator: ltc3589: Convert to i2c's .probe_new()
          commit: 78c8f6cdb51d471928d481ed3b2c82dbc110a1ed
[549/606] regulator: max8660: Convert to i2c's .probe_new()
          commit: dbf31dac703009174226bb87b3914bd092040327
[551/606] regulator: max8973-regulator: Convert to i2c's .probe_new()
          commit: 4e85e5d64f66ac5e4b0286ee4b6f8e8ce1044d42
[557/606] regulator: tps62360-regulator: Convert to i2c's .probe_new()
          commit: 18804160277ec2ab992373385f86c6af2322b28b
[559/606] regulator: tps65023-regulator: Convert to i2c's .probe_new()
          commit: 3b5b07dde998f6ade7433a8db019cf816c7e35af

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Mark Brown <broonie@kernel.org>
Date: 2022-11-24 12:28:43

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[564/606] spi: sc18is602: Convert to i2c's .probe_new()
          commit: c7f635bc16cefcd7c7ab6e508b2ae73d66af9ffa
[565/606] spi: xcomm: Convert to i2c's .probe_new()
          commit: 1a165a067ffdba66af3a696f49dfab24a0e0449e

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Mark Brown <broonie@kernel.org>
Date: 2022-11-24 13:28:22

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[538/606] regulator: act8865-regulator: Convert to i2c's .probe_new()
          (no commit info)
[539/606] regulator: ad5398: Convert to i2c's .probe_new()
          commit: 7f69edba960bbdcbc829d8d0995b1117ce29e8b1
[540/606] regulator: da9121-regulator: Convert to i2c's .probe_new()
          commit: 020cf73b47414a84b666d3e6736a6ae957e27840
[541/606] regulator: fan53555: Convert to i2c's .probe_new()
          (no commit info)
[542/606] regulator: isl6271a-regulator: Convert to i2c's .probe_new()
          (no commit info)
[543/606] regulator: lp3972: Convert to i2c's .probe_new()
          commit: 2532d5f8d5c20d5a0a8a0d57a311bc5df00dea04
[544/606] regulator: lp872x: Convert to i2c's .probe_new()
          commit: 87feccb347b25f5dc6ff451123b832c9ad5dddfe
[545/606] regulator: lp8755: Convert to i2c's .probe_new()
          commit: cb28f74b4809a00b40fdf0c44ccf51ab950581d3
[546/606] regulator: ltc3589: Convert to i2c's .probe_new()
          commit: 78c8f6cdb51d471928d481ed3b2c82dbc110a1ed
[547/606] regulator: max1586: Convert to i2c's .probe_new()
          commit: 3d54f7ba248b0ad1791bc356e9ad3d9020a1c472
[548/606] regulator: max8649: Convert to i2c's .probe_new()
          commit: 3cf4417385d0ac8f02f22888e12a6d21d97d89fc
[549/606] regulator: max8660: Convert to i2c's .probe_new()
          commit: dbf31dac703009174226bb87b3914bd092040327
[550/606] regulator: max8952: Convert to i2c's .probe_new()
          commit: c20c36735949b3b7984692fbab3d92b0e8a845ec
[551/606] regulator: max8973-regulator: Convert to i2c's .probe_new()
          commit: 4e85e5d64f66ac5e4b0286ee4b6f8e8ce1044d42
[552/606] regulator: pca9450-regulator: Convert to i2c's .probe_new()
          commit: ed56fa6e804cb13bbe29e9214792308817f6e553
[553/606] regulator: pfuze100-regulator: Convert to i2c's .probe_new()
          (no commit info)
[554/606] regulator: pv88080-regulator: Convert to i2c's .probe_new()
          (no commit info)
[555/606] regulator: rpi-panel-attiny-regulator: Convert to i2c's .probe_new()
          commit: d85d02d17a608b558d44510e9824668c5d4fe5d8
[556/606] regulator: tps51632-regulator: Convert to i2c's .probe_new()
          commit: d4885f306304ff29eec06b9ad5f526a1099e0418
[557/606] regulator: tps62360-regulator: Convert to i2c's .probe_new()
          commit: 18804160277ec2ab992373385f86c6af2322b28b
[558/606] regulator: tps6286x-regulator: Convert to i2c's .probe_new()
          commit: e34782316281c78c5911f86d4699d4f35a607c9d
[559/606] regulator: tps65023-regulator: Convert to i2c's .probe_new()
          commit: 3b5b07dde998f6ade7433a8db019cf816c7e35af

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Mark Brown <broonie@kernel.org>
Date: 2022-11-24 13:53:01

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[538/606] regulator: act8865-regulator: Convert to i2c's .probe_new()
          (no commit info)
[539/606] regulator: ad5398: Convert to i2c's .probe_new()
          commit: 7f69edba960bbdcbc829d8d0995b1117ce29e8b1
[540/606] regulator: da9121-regulator: Convert to i2c's .probe_new()
          commit: 020cf73b47414a84b666d3e6736a6ae957e27840
[541/606] regulator: fan53555: Convert to i2c's .probe_new()
          (no commit info)
[542/606] regulator: isl6271a-regulator: Convert to i2c's .probe_new()
          (no commit info)
[543/606] regulator: lp3972: Convert to i2c's .probe_new()
          commit: 2532d5f8d5c20d5a0a8a0d57a311bc5df00dea04
[544/606] regulator: lp872x: Convert to i2c's .probe_new()
          commit: 87feccb347b25f5dc6ff451123b832c9ad5dddfe
[545/606] regulator: lp8755: Convert to i2c's .probe_new()
          commit: cb28f74b4809a00b40fdf0c44ccf51ab950581d3
[546/606] regulator: ltc3589: Convert to i2c's .probe_new()
          commit: 78c8f6cdb51d471928d481ed3b2c82dbc110a1ed
[547/606] regulator: max1586: Convert to i2c's .probe_new()
          commit: 3d54f7ba248b0ad1791bc356e9ad3d9020a1c472
[548/606] regulator: max8649: Convert to i2c's .probe_new()
          commit: 3cf4417385d0ac8f02f22888e12a6d21d97d89fc
[549/606] regulator: max8660: Convert to i2c's .probe_new()
          commit: dbf31dac703009174226bb87b3914bd092040327
[550/606] regulator: max8952: Convert to i2c's .probe_new()
          commit: c20c36735949b3b7984692fbab3d92b0e8a845ec
[551/606] regulator: max8973-regulator: Convert to i2c's .probe_new()
          commit: 4e85e5d64f66ac5e4b0286ee4b6f8e8ce1044d42
[552/606] regulator: pca9450-regulator: Convert to i2c's .probe_new()
          commit: ed56fa6e804cb13bbe29e9214792308817f6e553
[553/606] regulator: pfuze100-regulator: Convert to i2c's .probe_new()
          (no commit info)
[554/606] regulator: pv88080-regulator: Convert to i2c's .probe_new()
          (no commit info)
[555/606] regulator: rpi-panel-attiny-regulator: Convert to i2c's .probe_new()
          commit: d85d02d17a608b558d44510e9824668c5d4fe5d8
[556/606] regulator: tps51632-regulator: Convert to i2c's .probe_new()
          commit: d4885f306304ff29eec06b9ad5f526a1099e0418
[557/606] regulator: tps62360-regulator: Convert to i2c's .probe_new()
          commit: 18804160277ec2ab992373385f86c6af2322b28b
[558/606] regulator: tps6286x-regulator: Convert to i2c's .probe_new()
          commit: e34782316281c78c5911f86d4699d4f35a607c9d
[559/606] regulator: tps65023-regulator: Convert to i2c's .probe_new()
          commit: 3b5b07dde998f6ade7433a8db019cf816c7e35af

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Mark Brown <broonie@kernel.org>
Date: 2022-11-24 14:09:18

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[538/606] regulator: act8865-regulator: Convert to i2c's .probe_new()
          (no commit info)
[539/606] regulator: ad5398: Convert to i2c's .probe_new()
          commit: 7f69edba960bbdcbc829d8d0995b1117ce29e8b1
[540/606] regulator: da9121-regulator: Convert to i2c's .probe_new()
          commit: 020cf73b47414a84b666d3e6736a6ae957e27840
[541/606] regulator: fan53555: Convert to i2c's .probe_new()
          (no commit info)
[542/606] regulator: isl6271a-regulator: Convert to i2c's .probe_new()
          (no commit info)
[543/606] regulator: lp3972: Convert to i2c's .probe_new()
          commit: 2532d5f8d5c20d5a0a8a0d57a311bc5df00dea04
[544/606] regulator: lp872x: Convert to i2c's .probe_new()
          commit: 87feccb347b25f5dc6ff451123b832c9ad5dddfe
[545/606] regulator: lp8755: Convert to i2c's .probe_new()
          commit: cb28f74b4809a00b40fdf0c44ccf51ab950581d3
[546/606] regulator: ltc3589: Convert to i2c's .probe_new()
          commit: 78c8f6cdb51d471928d481ed3b2c82dbc110a1ed
[547/606] regulator: max1586: Convert to i2c's .probe_new()
          commit: 3d54f7ba248b0ad1791bc356e9ad3d9020a1c472
[548/606] regulator: max8649: Convert to i2c's .probe_new()
          commit: 3cf4417385d0ac8f02f22888e12a6d21d97d89fc
[549/606] regulator: max8660: Convert to i2c's .probe_new()
          commit: dbf31dac703009174226bb87b3914bd092040327
[550/606] regulator: max8952: Convert to i2c's .probe_new()
          commit: c20c36735949b3b7984692fbab3d92b0e8a845ec
[551/606] regulator: max8973-regulator: Convert to i2c's .probe_new()
          commit: 4e85e5d64f66ac5e4b0286ee4b6f8e8ce1044d42
[552/606] regulator: pca9450-regulator: Convert to i2c's .probe_new()
          commit: ed56fa6e804cb13bbe29e9214792308817f6e553
[553/606] regulator: pfuze100-regulator: Convert to i2c's .probe_new()
          (no commit info)
[554/606] regulator: pv88080-regulator: Convert to i2c's .probe_new()
          (no commit info)
[555/606] regulator: rpi-panel-attiny-regulator: Convert to i2c's .probe_new()
          commit: d85d02d17a608b558d44510e9824668c5d4fe5d8
[556/606] regulator: tps51632-regulator: Convert to i2c's .probe_new()
          commit: d4885f306304ff29eec06b9ad5f526a1099e0418
[557/606] regulator: tps62360-regulator: Convert to i2c's .probe_new()
          commit: 18804160277ec2ab992373385f86c6af2322b28b
[558/606] regulator: tps6286x-regulator: Convert to i2c's .probe_new()
          commit: e34782316281c78c5911f86d4699d4f35a607c9d
[559/606] regulator: tps65023-regulator: Convert to i2c's .probe_new()
          commit: 3b5b07dde998f6ade7433a8db019cf816c7e35af

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Mark Brown <broonie@kernel.org>
Date: 2022-11-24 14:30:00

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[538/606] regulator: act8865-regulator: Convert to i2c's .probe_new()
          (no commit info)
[539/606] regulator: ad5398: Convert to i2c's .probe_new()
          commit: 7f69edba960bbdcbc829d8d0995b1117ce29e8b1
[540/606] regulator: da9121-regulator: Convert to i2c's .probe_new()
          commit: 020cf73b47414a84b666d3e6736a6ae957e27840
[541/606] regulator: fan53555: Convert to i2c's .probe_new()
          (no commit info)
[542/606] regulator: isl6271a-regulator: Convert to i2c's .probe_new()
          (no commit info)
[543/606] regulator: lp3972: Convert to i2c's .probe_new()
          commit: 2532d5f8d5c20d5a0a8a0d57a311bc5df00dea04
[544/606] regulator: lp872x: Convert to i2c's .probe_new()
          commit: 87feccb347b25f5dc6ff451123b832c9ad5dddfe
[545/606] regulator: lp8755: Convert to i2c's .probe_new()
          commit: cb28f74b4809a00b40fdf0c44ccf51ab950581d3
[546/606] regulator: ltc3589: Convert to i2c's .probe_new()
          commit: 78c8f6cdb51d471928d481ed3b2c82dbc110a1ed
[547/606] regulator: max1586: Convert to i2c's .probe_new()
          commit: 3d54f7ba248b0ad1791bc356e9ad3d9020a1c472
[548/606] regulator: max8649: Convert to i2c's .probe_new()
          commit: 3cf4417385d0ac8f02f22888e12a6d21d97d89fc
[549/606] regulator: max8660: Convert to i2c's .probe_new()
          commit: dbf31dac703009174226bb87b3914bd092040327
[550/606] regulator: max8952: Convert to i2c's .probe_new()
          commit: c20c36735949b3b7984692fbab3d92b0e8a845ec
[551/606] regulator: max8973-regulator: Convert to i2c's .probe_new()
          commit: 4e85e5d64f66ac5e4b0286ee4b6f8e8ce1044d42
[552/606] regulator: pca9450-regulator: Convert to i2c's .probe_new()
          commit: ed56fa6e804cb13bbe29e9214792308817f6e553
[553/606] regulator: pfuze100-regulator: Convert to i2c's .probe_new()
          (no commit info)
[554/606] regulator: pv88080-regulator: Convert to i2c's .probe_new()
          (no commit info)
[555/606] regulator: rpi-panel-attiny-regulator: Convert to i2c's .probe_new()
          commit: d85d02d17a608b558d44510e9824668c5d4fe5d8
[556/606] regulator: tps51632-regulator: Convert to i2c's .probe_new()
          commit: d4885f306304ff29eec06b9ad5f526a1099e0418
[557/606] regulator: tps62360-regulator: Convert to i2c's .probe_new()
          commit: 18804160277ec2ab992373385f86c6af2322b28b
[558/606] regulator: tps6286x-regulator: Convert to i2c's .probe_new()
          commit: e34782316281c78c5911f86d4699d4f35a607c9d
[559/606] regulator: tps65023-regulator: Convert to i2c's .probe_new()
          commit: 3b5b07dde998f6ade7433a8db019cf816c7e35af

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Mark Brown <broonie@kernel.org>
Date: 2022-11-24 15:17:01

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[538/606] regulator: act8865-regulator: Convert to i2c's .probe_new()
          (no commit info)
[539/606] regulator: ad5398: Convert to i2c's .probe_new()
          commit: 7f69edba960bbdcbc829d8d0995b1117ce29e8b1
[540/606] regulator: da9121-regulator: Convert to i2c's .probe_new()
          commit: 020cf73b47414a84b666d3e6736a6ae957e27840
[541/606] regulator: fan53555: Convert to i2c's .probe_new()
          (no commit info)
[542/606] regulator: isl6271a-regulator: Convert to i2c's .probe_new()
          (no commit info)
[543/606] regulator: lp3972: Convert to i2c's .probe_new()
          commit: 2532d5f8d5c20d5a0a8a0d57a311bc5df00dea04
[544/606] regulator: lp872x: Convert to i2c's .probe_new()
          commit: 87feccb347b25f5dc6ff451123b832c9ad5dddfe
[545/606] regulator: lp8755: Convert to i2c's .probe_new()
          commit: cb28f74b4809a00b40fdf0c44ccf51ab950581d3
[546/606] regulator: ltc3589: Convert to i2c's .probe_new()
          commit: 78c8f6cdb51d471928d481ed3b2c82dbc110a1ed
[547/606] regulator: max1586: Convert to i2c's .probe_new()
          commit: 3d54f7ba248b0ad1791bc356e9ad3d9020a1c472
[548/606] regulator: max8649: Convert to i2c's .probe_new()
          commit: 3cf4417385d0ac8f02f22888e12a6d21d97d89fc
[549/606] regulator: max8660: Convert to i2c's .probe_new()
          commit: dbf31dac703009174226bb87b3914bd092040327
[550/606] regulator: max8952: Convert to i2c's .probe_new()
          commit: c20c36735949b3b7984692fbab3d92b0e8a845ec
[551/606] regulator: max8973-regulator: Convert to i2c's .probe_new()
          commit: 4e85e5d64f66ac5e4b0286ee4b6f8e8ce1044d42
[552/606] regulator: pca9450-regulator: Convert to i2c's .probe_new()
          commit: ed56fa6e804cb13bbe29e9214792308817f6e553
[553/606] regulator: pfuze100-regulator: Convert to i2c's .probe_new()
          (no commit info)
[554/606] regulator: pv88080-regulator: Convert to i2c's .probe_new()
          (no commit info)
[555/606] regulator: rpi-panel-attiny-regulator: Convert to i2c's .probe_new()
          commit: d85d02d17a608b558d44510e9824668c5d4fe5d8
[556/606] regulator: tps51632-regulator: Convert to i2c's .probe_new()
          commit: d4885f306304ff29eec06b9ad5f526a1099e0418
[557/606] regulator: tps62360-regulator: Convert to i2c's .probe_new()
          commit: 18804160277ec2ab992373385f86c6af2322b28b
[558/606] regulator: tps6286x-regulator: Convert to i2c's .probe_new()
          commit: e34782316281c78c5911f86d4699d4f35a607c9d
[559/606] regulator: tps65023-regulator: Convert to i2c's .probe_new()
          commit: 3b5b07dde998f6ade7433a8db019cf816c7e35af

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Mark Brown <broonie@kernel.org>
Date: 2022-11-24 15:27:54

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[538/606] regulator: act8865-regulator: Convert to i2c's .probe_new()
          (no commit info)
[539/606] regulator: ad5398: Convert to i2c's .probe_new()
          commit: 7f69edba960bbdcbc829d8d0995b1117ce29e8b1
[540/606] regulator: da9121-regulator: Convert to i2c's .probe_new()
          commit: 020cf73b47414a84b666d3e6736a6ae957e27840
[541/606] regulator: fan53555: Convert to i2c's .probe_new()
          (no commit info)
[542/606] regulator: isl6271a-regulator: Convert to i2c's .probe_new()
          (no commit info)
[543/606] regulator: lp3972: Convert to i2c's .probe_new()
          commit: 2532d5f8d5c20d5a0a8a0d57a311bc5df00dea04
[544/606] regulator: lp872x: Convert to i2c's .probe_new()
          commit: 87feccb347b25f5dc6ff451123b832c9ad5dddfe
[545/606] regulator: lp8755: Convert to i2c's .probe_new()
          commit: cb28f74b4809a00b40fdf0c44ccf51ab950581d3
[546/606] regulator: ltc3589: Convert to i2c's .probe_new()
          commit: 78c8f6cdb51d471928d481ed3b2c82dbc110a1ed
[547/606] regulator: max1586: Convert to i2c's .probe_new()
          commit: 3d54f7ba248b0ad1791bc356e9ad3d9020a1c472
[548/606] regulator: max8649: Convert to i2c's .probe_new()
          commit: 3cf4417385d0ac8f02f22888e12a6d21d97d89fc
[549/606] regulator: max8660: Convert to i2c's .probe_new()
          commit: dbf31dac703009174226bb87b3914bd092040327
[550/606] regulator: max8952: Convert to i2c's .probe_new()
          commit: c20c36735949b3b7984692fbab3d92b0e8a845ec
[551/606] regulator: max8973-regulator: Convert to i2c's .probe_new()
          commit: 4e85e5d64f66ac5e4b0286ee4b6f8e8ce1044d42
[552/606] regulator: pca9450-regulator: Convert to i2c's .probe_new()
          commit: ed56fa6e804cb13bbe29e9214792308817f6e553
[553/606] regulator: pfuze100-regulator: Convert to i2c's .probe_new()
          (no commit info)
[554/606] regulator: pv88080-regulator: Convert to i2c's .probe_new()
          (no commit info)
[555/606] regulator: rpi-panel-attiny-regulator: Convert to i2c's .probe_new()
          commit: d85d02d17a608b558d44510e9824668c5d4fe5d8
[556/606] regulator: tps51632-regulator: Convert to i2c's .probe_new()
          commit: d4885f306304ff29eec06b9ad5f526a1099e0418
[557/606] regulator: tps62360-regulator: Convert to i2c's .probe_new()
          commit: 18804160277ec2ab992373385f86c6af2322b28b
[558/606] regulator: tps6286x-regulator: Convert to i2c's .probe_new()
          commit: e34782316281c78c5911f86d4699d4f35a607c9d
[559/606] regulator: tps65023-regulator: Convert to i2c's .probe_new()
          commit: 3b5b07dde998f6ade7433a8db019cf816c7e35af

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Mark Brown <broonie@kernel.org>
Date: 2022-11-24 15:39:30

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[538/606] regulator: act8865-regulator: Convert to i2c's .probe_new()
          (no commit info)
[539/606] regulator: ad5398: Convert to i2c's .probe_new()
          commit: 7f69edba960bbdcbc829d8d0995b1117ce29e8b1
[540/606] regulator: da9121-regulator: Convert to i2c's .probe_new()
          commit: 020cf73b47414a84b666d3e6736a6ae957e27840
[541/606] regulator: fan53555: Convert to i2c's .probe_new()
          (no commit info)
[542/606] regulator: isl6271a-regulator: Convert to i2c's .probe_new()
          (no commit info)
[543/606] regulator: lp3972: Convert to i2c's .probe_new()
          commit: 2532d5f8d5c20d5a0a8a0d57a311bc5df00dea04
[544/606] regulator: lp872x: Convert to i2c's .probe_new()
          commit: 87feccb347b25f5dc6ff451123b832c9ad5dddfe
[545/606] regulator: lp8755: Convert to i2c's .probe_new()
          commit: cb28f74b4809a00b40fdf0c44ccf51ab950581d3
[546/606] regulator: ltc3589: Convert to i2c's .probe_new()
          commit: 78c8f6cdb51d471928d481ed3b2c82dbc110a1ed
[547/606] regulator: max1586: Convert to i2c's .probe_new()
          commit: 3d54f7ba248b0ad1791bc356e9ad3d9020a1c472
[548/606] regulator: max8649: Convert to i2c's .probe_new()
          commit: 3cf4417385d0ac8f02f22888e12a6d21d97d89fc
[549/606] regulator: max8660: Convert to i2c's .probe_new()
          commit: dbf31dac703009174226bb87b3914bd092040327
[550/606] regulator: max8952: Convert to i2c's .probe_new()
          commit: c20c36735949b3b7984692fbab3d92b0e8a845ec
[551/606] regulator: max8973-regulator: Convert to i2c's .probe_new()
          commit: 4e85e5d64f66ac5e4b0286ee4b6f8e8ce1044d42
[552/606] regulator: pca9450-regulator: Convert to i2c's .probe_new()
          commit: ed56fa6e804cb13bbe29e9214792308817f6e553
[553/606] regulator: pfuze100-regulator: Convert to i2c's .probe_new()
          (no commit info)
[554/606] regulator: pv88080-regulator: Convert to i2c's .probe_new()
          (no commit info)
[555/606] regulator: rpi-panel-attiny-regulator: Convert to i2c's .probe_new()
          commit: d85d02d17a608b558d44510e9824668c5d4fe5d8
[556/606] regulator: tps51632-regulator: Convert to i2c's .probe_new()
          commit: d4885f306304ff29eec06b9ad5f526a1099e0418
[557/606] regulator: tps62360-regulator: Convert to i2c's .probe_new()
          commit: 18804160277ec2ab992373385f86c6af2322b28b
[558/606] regulator: tps6286x-regulator: Convert to i2c's .probe_new()
          commit: e34782316281c78c5911f86d4699d4f35a607c9d
[559/606] regulator: tps65023-regulator: Convert to i2c's .probe_new()
          commit: 3b5b07dde998f6ade7433a8db019cf816c7e35af

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Mark Brown <broonie@kernel.org>
Date: 2022-11-24 15:50:53

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[538/606] regulator: act8865-regulator: Convert to i2c's .probe_new()
          (no commit info)
[539/606] regulator: ad5398: Convert to i2c's .probe_new()
          commit: 7f69edba960bbdcbc829d8d0995b1117ce29e8b1
[540/606] regulator: da9121-regulator: Convert to i2c's .probe_new()
          commit: 020cf73b47414a84b666d3e6736a6ae957e27840
[541/606] regulator: fan53555: Convert to i2c's .probe_new()
          (no commit info)
[542/606] regulator: isl6271a-regulator: Convert to i2c's .probe_new()
          (no commit info)
[543/606] regulator: lp3972: Convert to i2c's .probe_new()
          commit: 2532d5f8d5c20d5a0a8a0d57a311bc5df00dea04
[544/606] regulator: lp872x: Convert to i2c's .probe_new()
          commit: 87feccb347b25f5dc6ff451123b832c9ad5dddfe
[545/606] regulator: lp8755: Convert to i2c's .probe_new()
          commit: cb28f74b4809a00b40fdf0c44ccf51ab950581d3
[546/606] regulator: ltc3589: Convert to i2c's .probe_new()
          commit: 78c8f6cdb51d471928d481ed3b2c82dbc110a1ed
[547/606] regulator: max1586: Convert to i2c's .probe_new()
          commit: 3d54f7ba248b0ad1791bc356e9ad3d9020a1c472
[548/606] regulator: max8649: Convert to i2c's .probe_new()
          commit: 3cf4417385d0ac8f02f22888e12a6d21d97d89fc
[549/606] regulator: max8660: Convert to i2c's .probe_new()
          commit: dbf31dac703009174226bb87b3914bd092040327
[550/606] regulator: max8952: Convert to i2c's .probe_new()
          commit: c20c36735949b3b7984692fbab3d92b0e8a845ec
[551/606] regulator: max8973-regulator: Convert to i2c's .probe_new()
          commit: 4e85e5d64f66ac5e4b0286ee4b6f8e8ce1044d42
[552/606] regulator: pca9450-regulator: Convert to i2c's .probe_new()
          commit: ed56fa6e804cb13bbe29e9214792308817f6e553
[553/606] regulator: pfuze100-regulator: Convert to i2c's .probe_new()
          (no commit info)
[554/606] regulator: pv88080-regulator: Convert to i2c's .probe_new()
          (no commit info)
[555/606] regulator: rpi-panel-attiny-regulator: Convert to i2c's .probe_new()
          commit: d85d02d17a608b558d44510e9824668c5d4fe5d8
[556/606] regulator: tps51632-regulator: Convert to i2c's .probe_new()
          commit: d4885f306304ff29eec06b9ad5f526a1099e0418
[557/606] regulator: tps62360-regulator: Convert to i2c's .probe_new()
          commit: 18804160277ec2ab992373385f86c6af2322b28b
[558/606] regulator: tps6286x-regulator: Convert to i2c's .probe_new()
          commit: e34782316281c78c5911f86d4699d4f35a607c9d
[559/606] regulator: tps65023-regulator: Convert to i2c's .probe_new()
          commit: 3b5b07dde998f6ade7433a8db019cf816c7e35af

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Mark Brown <broonie@kernel.org>
Date: 2022-11-24 16:05:31

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[538/606] regulator: act8865-regulator: Convert to i2c's .probe_new()
          commit: 3d2a78ae5df5d7f48c002e5f73d18d8c7628d266
[539/606] regulator: ad5398: Convert to i2c's .probe_new()
          commit: 7f69edba960bbdcbc829d8d0995b1117ce29e8b1
[540/606] regulator: da9121-regulator: Convert to i2c's .probe_new()
          commit: 020cf73b47414a84b666d3e6736a6ae957e27840
[541/606] regulator: fan53555: Convert to i2c's .probe_new()
          commit: 655425650f5e361224a86aa11bf3c044bf04df2a
[542/606] regulator: isl6271a-regulator: Convert to i2c's .probe_new()
          commit: 69518d21deaa448be65b7c0be67aab230e88eaa7
[543/606] regulator: lp3972: Convert to i2c's .probe_new()
          commit: 2532d5f8d5c20d5a0a8a0d57a311bc5df00dea04
[544/606] regulator: lp872x: Convert to i2c's .probe_new()
          commit: 87feccb347b25f5dc6ff451123b832c9ad5dddfe
[545/606] regulator: lp8755: Convert to i2c's .probe_new()
          commit: cb28f74b4809a00b40fdf0c44ccf51ab950581d3
[546/606] regulator: ltc3589: Convert to i2c's .probe_new()
          commit: 78c8f6cdb51d471928d481ed3b2c82dbc110a1ed
[547/606] regulator: max1586: Convert to i2c's .probe_new()
          commit: 3d54f7ba248b0ad1791bc356e9ad3d9020a1c472
[548/606] regulator: max8649: Convert to i2c's .probe_new()
          commit: 3cf4417385d0ac8f02f22888e12a6d21d97d89fc
[549/606] regulator: max8660: Convert to i2c's .probe_new()
          commit: dbf31dac703009174226bb87b3914bd092040327
[550/606] regulator: max8952: Convert to i2c's .probe_new()
          commit: c20c36735949b3b7984692fbab3d92b0e8a845ec
[551/606] regulator: max8973-regulator: Convert to i2c's .probe_new()
          commit: 4e85e5d64f66ac5e4b0286ee4b6f8e8ce1044d42
[552/606] regulator: pca9450-regulator: Convert to i2c's .probe_new()
          commit: ed56fa6e804cb13bbe29e9214792308817f6e553
[553/606] regulator: pfuze100-regulator: Convert to i2c's .probe_new()
          commit: 8348c710b51bac713a6fd2e07d64eb71d5680e2e
[554/606] regulator: pv88080-regulator: Convert to i2c's .probe_new()
          commit: c9f9ef15b84222f4cc686b1013ee3fd192b0bab8
[555/606] regulator: rpi-panel-attiny-regulator: Convert to i2c's .probe_new()
          commit: d85d02d17a608b558d44510e9824668c5d4fe5d8
[556/606] regulator: tps51632-regulator: Convert to i2c's .probe_new()
          commit: d4885f306304ff29eec06b9ad5f526a1099e0418
[557/606] regulator: tps62360-regulator: Convert to i2c's .probe_new()
          commit: 18804160277ec2ab992373385f86c6af2322b28b
[558/606] regulator: tps6286x-regulator: Convert to i2c's .probe_new()
          commit: e34782316281c78c5911f86d4699d4f35a607c9d
[559/606] regulator: tps65023-regulator: Convert to i2c's .probe_new()
          commit: 3b5b07dde998f6ade7433a8db019cf816c7e35af

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Mark Brown <broonie@kernel.org>
Date: 2022-11-25 14:29:23

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[601/606] ASoC: codecs: es8326: Convert to i2c's .probe_new()
          commit: 784252bac835c831e10c48be633cd1ff0d697326
[602/606] ASoC: max98396: Convert to i2c's .probe_new()
          commit: 2ff85020ec5db4af3b55d35f5b8385e830c39fdd
[603/606] ASoC: codecs: src4xxx-i2c: Convert to i2c's .probe_new()
          commit: 830a35aa2121258d0c8283abe45ebb5c3d2fd791
[604/606] ASoC: codecs: tas2780: Convert to i2c's .probe_new()
          commit: 88ade2abba1e46fe581610911240054538f8db88

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Andy Shevchenko <hidden>
Date: 2022-11-26 15:44:13

On Tue, Nov 22, 2022 at 09:16:54PM +0100, Uwe Kleine-König wrote:
On Tue, Nov 22, 2022 at 06:58:18PM +0000, Jonathan Cameron wrote:
quoted
Queued all of the below:
with one tweaked as per your suggestion and the highlighted one dropped on basis
I was already carrying the equivalent - as you pointed out.

I was already carrying the required dependency.

Includes the IIO ones in staging.
quoted
p.s. I perhaps foolishly did this in a highly manual way so as to
also pick up Andy's RB.  So might have dropped one...
You could have done:

	H=$(git rev-parse @)
	b4 am -P 49-190 20221118224540.619276-1-uwe@kleine-koenig.org
	git am ...
	git filter-branch -f --msg-filter "grep -v 'Signed-off-by: Jonathan'; echo 'Reviewed-by: Andy Shevchenko [off-list ref]'; echo 'Signed-off-by: Jonathan Cameron [off-list ref]'" $H..

(untested, but you get the idea).
That's, for example (just last from the history as is), how I usually do it
(tested):

 git filter-branch --msg-filter 'sed -e "/Signed-off-by: Andy Shevchenko/ a Tested-by: Daniel Scally [off-list ref]"' -f HEAD~4..HEAD


-- 
With Best Regards,
Andy Shevchenko

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Michael Ellerman <hidden>
Date: 2022-11-30 09:49:57

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied to powerpc/next.

[289/606] macintosh: ams/ams-i2c: Convert to i2c's .probe_new()
          https://git.kernel.org/powerpc/c/8daa9c1dc9b4a3422801017ca46d935073dc14c0
[290/606] macintosh: therm_adt746x: Convert to i2c's .probe_new()
          https://git.kernel.org/powerpc/c/0424113fed923a2fcb699b5f3aa335d16e092f3d
[291/606] macintosh: therm_windtunnel: Convert to i2c's .probe_new()
          https://git.kernel.org/powerpc/c/dc9be0735c3e245fe60775307cf7842b1f9b45a2
[292/606] macintosh: windfarm_ad7417_sensor: Convert to i2c's .probe_new()
          https://git.kernel.org/powerpc/c/9d533bdf4a582f037327f1a38ed8cf689d67cab4
[293/606] macintosh: windfarm_fcu_controls: Convert to i2c's .probe_new()
          https://git.kernel.org/powerpc/c/472e4c61d2bb4977ade8e2491953954bf9723563
[294/606] macintosh: windfarm_lm75_sensor: Convert to i2c's .probe_new()
          https://git.kernel.org/powerpc/c/51a9e1755cdd8b127191030d15b74b97f7d3ce75
[295/606] macintosh: windfarm_lm87_sensor: Convert to i2c's .probe_new()
          https://git.kernel.org/powerpc/c/0e2211b3373ea718d2161bcc360cd4d9a3bcebc6
[296/606] macintosh: windfarm_max6690_sensor: Convert to i2c's .probe_new()
          https://git.kernel.org/powerpc/c/2d7a9d780444c8f31ee6af522a92a99492d9eeb2
[297/606] macintosh: windfarm_smu_sat: Convert to i2c's .probe_new()
          https://git.kernel.org/powerpc/c/d05921a09a5a72805a1d669dce0fcbd66df86237

cheers

Re: (subset) [PATCH 000/606] i2c: Complete conversion to i2c_probe_new

From: Robert Foss <hidden>
Date: 2022-12-12 16:39:31

On Fri, 18 Nov 2022 23:35:34 +0100, Uwe Kleine-König wrote:
since commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type") from 2016 there is a "temporary" alternative probe
callback for i2c drivers.

This series completes all drivers to this new callback (unless I missed
something). It's based on current next/master.
A part of the patches depend on commit 662233731d66 ("i2c: core:
Introduce i2c_client_get_device_id helper function"), there is a branch that
you can pull into your tree to get it:

[...]
Applied, thanks!

Repo: https://cgit.freedesktop.org/drm/drm-misc/


[014/606] drm/bridge: adv7511: Convert to i2c's .probe_new()
          commit: 1c546894ff82f8b7c070998c03f9b15a3499f326
[028/606] drm/bridge: parade-ps8622: Convert to i2c's .probe_new()
          commit: d6b522e9bbb0cca1aeae4ef6188800534794836f
[035/606] drm/bridge: ti-sn65dsi83: Convert to i2c's .probe_new()
          commit: 0f6548807fa77e87bbc37964c6b1ed9ba6e1155d



rob
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help