# Re: \[External\] Re: \[PATCH v2 3/9\] NTB: Change to use pci\_aer\_clear\_uncorrect\_error\_status()

- From: Zhuo Chen \<hidden\>
- Date: 2022-09-28 04:20:47 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2022/09/1949117
- Thread: https://ratatoskr.run/linuxppc-dev/2022/09/1948395/t.md

```text


On 9/28/22 3:39 AM, Sathyanarayanan Kuppuswamy wrote:
>
>
> On 9/27/22 8:35 AM, Zhuo Chen wrote:
>> Status bits for ERR_NONFATAL errors only are cleared in
>> pci_aer_clear_nonfatal_status(), but we want clear uncorrectable
>> error status in idt_init_pci(), so we change to use
>> pci_aer_clear_uncorrect_error_status().
>
> You mean currently driver does not clear fatal errors now, and it is
> a problem? Any error reported?
>
Hi Sathyanarayanan,

No error reports yet, I just changes the behavior back to what it was before commit e7b0b847de6d ("PCI/AER: Clear only ERR_NONFATAL bits during non-fatal recovery"), because this commit change the original function in commit bf2a952d31d2 ("NTB: Add IDT 89HPESxNTx PCIe-switches support").

> Also, I am wondering why is it required to clear errors during init
> code. Is it a norm?
>
I think there is no need to clear errors during init code.
>>
>> Signed-off-by: Zhuo Chen <redacted>
>> ---
>>   drivers/ntb/hw/idt/ntb_hw_idt.c | 4 ++--
>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.c b/drivers/ntb/hw/idt/ntb_hw_idt.c
>> index 0ed6f809ff2e..d5f0aa87f817 100644
>> --- a/drivers/ntb/hw/idt/ntb_hw_idt.c
>> +++ b/drivers/ntb/hw/idt/ntb_hw_idt.c
>> @@ -2657,8 +2657,8 @@ static int idt_init_pci(struct idt_ntb_dev *ndev)
>>   	ret = pci_enable_pcie_error_reporting(pdev);
>>   	if (ret != 0)
>>   		dev_warn(&pdev->dev, "PCIe AER capability disabled\n");
>> -	else /* Cleanup nonfatal error status before getting to init */
>> -		pci_aer_clear_nonfatal_status(pdev);
>> +	else /* Cleanup uncorrectable error status before getting to init */
>> +		pci_aer_clear_uncorrect_error_status(pdev);
>>   
>>   	/* First enable the PCI device */
>>   	ret = pcim_enable_device(pdev);
>

-- 
Thanks,
Zhuo Chen
```
