This patch series implements the crash hotplug handler on PowerPC introduced
by https://lkml.org/lkml/2022/6/13/3382 patch series.
The Problem:
============
Post hotplug/DLPAR events the capture kernel holds stale information about the
system. Dump collection with stale capture kernel might end up in dump capture
failure or an inaccurate dump collection.
Existing solution:
==================
The existing solution to keep the capture kernel up-to-date is observe the
hotplug event via udev rule and trigger a full capture kernel reload post
hotplug event.
Shortcomings:
------------------------------------------------
- Leaves a window where kernel crash might not lead to successful dump
collection.
- Reloading all kexec components for each hotplug is inefficient. Since only
one or two kexec components need to be updated due to hotplug event reloading
all kexec component is redundant.
- udev rules are prone to races if hotplug events are frequent.
More about issues with an existing solution is posted here:
- https://lkml.org/lkml/2020/12/14/532
- https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-February/240254.html
Proposed Solution:
==================
Instead of reloading all kexec segments on hotplug event, this patch series
focuses on updating only the relevant kexec segment. Once the kexec
segments are loaded in the kernel reserved area then an arch-specific hotplug handler
will update the relevant kexec segment based on hotplug event type.
As mentioned above this patch series implemented a PowerPC crash hotplug
handler for the CPU. The crash hotplug handler memory is in our TODO list.
A couple of minor changes are required to realize the benefit of the patch
series:
- disalble the udev rule:
comment out the below line in kdump udev rule file:
RHEL: /usr/lib/udev/rules.d/98-kexec.rules
# SUBSYSTEM=="cpu", ACTION=="online", GOTO="kdump_reload_cpu"
- kexec tool needs to be updated with patch for kexec_load system call
to work (not needed if -s option is used during kexec panic load):
---
diff --git a/kexec/arch/ppc64/kexec-elf-ppc64.c b/kexec/arch/ppc64/kexec-elf-ppc64.c
index 695b8b0..1dc6490 100644
--- a/kexec/arch/ppc64/kexec-elf-ppc64.c
+++ b/kexec/arch/ppc64/kexec-elf-ppc64.c
@@ -45,6 +45,29 @@ uint64_t initrd_base, initrd_size;
unsigned char reuse_initrd = 0;
const char *ramdisk;
+#define MAX_CORE 256
+#define PER_CORE_NODE_SIZE 1500
+
+/**
+ * get_crash_fdt_mem_sz() - calcuate mem size for crash kernel FDT
+ * @fdt: pointer to crash kernel FDT
+ *
+ * Calculate the buffer space needed to add more CPU nodes in FDT after
+ * capture kenrel load due to hot add events.
+ *
+ * Some assumption are made to calculate the additional buffer size needed
+ * to accommodate future hot add CPUs to the crash FDT. The maximum core count
+ * in the system would not go beyond MAX_CORE and memory needed to store per core
+ * date in FDT is PER_CORE_NODE_SIZE.
+ *
+ * Certainly MAX_CORE count can be replaced with possible core count and
+ * PER_CORE_NODE_SIZE to some standard value instead of randomly observed
+ * core size value on Power9 LPAR.
+ */
+static unsigned int get_crash_fdt_mem_sz(void *fdt) {
+ return fdt_totalsize(fdt) + (PER_CORE_NODE_SIZE * MAX_CORE);
+}
+
int elf_ppc64_probe(const char *buf, off_t len)
{
struct mem_ehdr ehdr;@@ -179,6 +202,7 @@ int elf_ppc64_load(int argc, char **argv, const char *buf, off_t len,
uint64_t max_addr, hole_addr;
char *seg_buf = NULL;
off_t seg_size = 0;
+ unsigned int mem_sz = 0;
struct mem_phdr *phdr;
size_t size;
#ifdef NEED_RESERVE_DTB
@@ -329,7 +353,13 @@ int elf_ppc64_load(int argc, char **argv, const char *buf, off_t len,
if (result < 0)
return result;
- my_dt_offset = add_buffer(info, seg_buf, seg_size, seg_size,
+ if (info->kexec_flags & KEXEC_ON_CRASH) {
+ mem_sz = get_crash_fdt_mem_sz((void *)seg_buf);
+ fdt_set_totalsize(seg_buf, mem_sz);
+ info->fdt_index = info->nr_segments;
+ }
+
+ my_dt_offset = add_buffer(info, seg_buf, seg_size, mem_sz,
0, 0, max_addr, -1);
#ifdef NEED_RESERVE_DTBdiff --git a/kexec/kexec.c b/kexec/kexec.c
index f63b36b..846b1a8 100644
--- a/kexec/kexec.c
+++ b/kexec/kexec.c
@@ -672,6 +672,9 @@ static void update_purgatory(struct kexec_info *info)
if (info->segment[i].mem == (void *)info->rhdr.rel_addr) {
continue;
}
+ if (info->fdt_index == i)
+ continue;
+
sha256_update(&ctx, info->segment[i].buf,
info->segment[i].bufsz);
nullsz = info->segment[i].memsz - info->segment[i].bufsz;diff --git a/kexec/kexec.h b/kexec/kexec.h
index 595dd68..0906a1b 100644
--- a/kexec/kexec.h
+++ b/kexec/kexec.h
@@ -169,6 +169,7 @@ struct kexec_info {
int command_line_len;
int skip_checks;
+ // Given that we might need to update mutliple kexec segments
+ // then having array to keep indexes of all hotplug kexec segments
+ // will be helpful.
+ unsigned int fdt_index;
};
struct arch_map_entry {
---
---
Changelog:
v1 -> v2:
- Use generic hotplug handler introduced by https://lkml.org/lkml/2022/2/9/1406, a
significant change from v1.
v2 -> v3
- Move fdt_index and fdt_index_vaild variables to kimage_arch struct.
- Rebase patche on top of https://lkml.org/lkml/2022/3/3/674 [v5]
- Fixed warning reported by checpatch script
v3 -> v4:
- Update the logic to find the additional space needed for hotadd CPUs post
kexec load. Refer "[RFC v4 PATCH 4/5] powerpc/crash hp: add crash hotplug
support for kexec_file_load" patch to know more about the change.
- Fix a couple of typo.
- Replace pr_err to pr_info_once to warn user about memory hotplug
support.
- In crash hotplug handle exit the for loop if FDT segment is found.
v4 -> v5:
- Replace COFNIG_CRASH_HOTPLUG with CONFIG_HOTPLUG_CPU.
- Move fdt segment identification for kexec_load case to load path
instead of crash hotplug handler
- Keep new attribute defined under kimage_arch to track FDT segment
under CONFIG_HOTPLUG_CPU config.
---
Sourabh Jain (5):
powerpc/kexec: make update_cpus_node non-static
powerpc/crash hp: update kimage_arch struct
powerpc/crash hp: add crash hotplug support for kexec_file_load
powerpc/crash hp: add crash hotplug support for kexec_load
powerpc/crash hp: add crash page helper functions
arch/powerpc/include/asm/kexec.h | 4 +
arch/powerpc/kexec/core_64.c | 169 ++++++++++++++++++++++++++++++
arch/powerpc/kexec/elf_64.c | 74 +++++++++++++
arch/powerpc/kexec/file_load_64.c | 92 +---------------
4 files changed, 252 insertions(+), 87 deletions(-)
--
2.36.1
Make the update_cpus_node function non-static and export it for
usage in other kexec components.
The update_cpus_node definition is moved to core_64.c so that it
can be used with both kexec_load and kexec_file_load system calls.
No functional change intended.
Signed-off-by: Sourabh Jain <redacted>
---
arch/powerpc/include/asm/kexec.h | 1 +
arch/powerpc/kexec/core_64.c | 88 +++++++++++++++++++++++++++++++
arch/powerpc/kexec/file_load_64.c | 87 ------------------------------
3 files changed, 89 insertions(+), 87 deletions(-)
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 2aefe14e1442..c8040c93b15a 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -129,6 +129,7 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image);
int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
unsigned long initrd_load_addr,
unsigned long initrd_len, const char *cmdline);
+int update_cpus_node(void *fdt);
#endif /* CONFIG_PPC64 */
#endif /* CONFIG_KEXEC_FILE */
diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c
index 6cc7793b8420..65b3afb2169a 100644
--- a/arch/powerpc/kexec/core_64.c
+++ b/arch/powerpc/kexec/core_64.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/cpu.h>
#include <linux/hardirq.h>
+#include <linux/libfdt.h>
#include <asm/page.h>
#include <asm/current.h>
@@ -377,6 +378,93 @@ void default_machine_kexec(struct kimage *image)
/* NOTREACHED */
}
+/**
+ * add_node_props - Reads node properties from device node structure and add
+ * them to fdt.
+ * @fdt: Flattened device tree of the kernel
+ * @node_offset: offset of the node to add a property at
+ * @dn: device node pointer
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int add_node_props(void *fdt, int node_offset, const struct device_node *dn)
+{
+ int ret = 0;
+ struct property *pp;
+
+ if (!dn)
+ return -EINVAL;
+
+ for_each_property_of_node(dn, pp) {
+ ret = fdt_setprop(fdt, node_offset, pp->name, pp->value, pp->length);
+ if (ret < 0) {
+ pr_err("Unable to add %s property: %s\n", pp->name, fdt_strerror(ret));
+ return ret;
+ }
+ }
+ return ret;
+}
+
+/**
+ * update_cpus_node - Update cpus node of flattened device tree using of_root
+ * device node.
+ * @fdt: Flattened device tree of the kernel.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+int update_cpus_node(void *fdt)
+{
+ struct device_node *cpus_node, *dn;
+ int cpus_offset, cpus_subnode_offset, ret = 0;
+
+ cpus_offset = fdt_path_offset(fdt, "/cpus");
+ if (cpus_offset < 0 && cpus_offset != -FDT_ERR_NOTFOUND) {
+ pr_err("Malformed device tree: error reading /cpus node: %s\n",
+ fdt_strerror(cpus_offset));
+ return cpus_offset;
+ }
+
+ if (cpus_offset > 0) {
+ ret = fdt_del_node(fdt, cpus_offset);
+ if (ret < 0) {
+ pr_err("Error deleting /cpus node: %s\n", fdt_strerror(ret));
+ return -EINVAL;
+ }
+ }
+
+ /* Add cpus node to fdt */
+ cpus_offset = fdt_add_subnode(fdt, fdt_path_offset(fdt, "/"), "cpus");
+ if (cpus_offset < 0) {
+ pr_err("Error creating /cpus node: %s\n", fdt_strerror(cpus_offset));
+ return -EINVAL;
+ }
+
+ /* Add cpus node properties */
+ cpus_node = of_find_node_by_path("/cpus");
+ ret = add_node_props(fdt, cpus_offset, cpus_node);
+ of_node_put(cpus_node);
+ if (ret < 0)
+ return ret;
+
+ /* Loop through all subnodes of cpus and add them to fdt */
+ for_each_node_by_type(dn, "cpu") {
+ cpus_subnode_offset = fdt_add_subnode(fdt, cpus_offset, dn->full_name);
+ if (cpus_subnode_offset < 0) {
+ pr_err("Unable to add %s subnode: %s\n", dn->full_name,
+ fdt_strerror(cpus_subnode_offset));
+ ret = cpus_subnode_offset;
+ goto out;
+ }
+
+ ret = add_node_props(fdt, cpus_subnode_offset, dn);
+ if (ret < 0)
+ goto out;
+ }
+out:
+ of_node_put(dn);
+ return ret;
+}
+
#ifdef CONFIG_PPC_64S_HASH_MMU
/* Values we need to export to the second kernel via the device tree. */
static unsigned long htab_base;diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c
index 07da6bf1cf24..57f991b0a9da 100644
--- a/arch/powerpc/kexec/file_load_64.c
+++ b/arch/powerpc/kexec/file_load_64.c
@@ -951,93 +951,6 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image)
return (unsigned int)(usm_entries * sizeof(u64));
}
-/**
- * add_node_props - Reads node properties from device node structure and add
- * them to fdt.
- * @fdt: Flattened device tree of the kernel
- * @node_offset: offset of the node to add a property at
- * @dn: device node pointer
- *
- * Returns 0 on success, negative errno on error.
- */
-static int add_node_props(void *fdt, int node_offset, const struct device_node *dn)
-{
- int ret = 0;
- struct property *pp;
-
- if (!dn)
- return -EINVAL;
-
- for_each_property_of_node(dn, pp) {
- ret = fdt_setprop(fdt, node_offset, pp->name, pp->value, pp->length);
- if (ret < 0) {
- pr_err("Unable to add %s property: %s\n", pp->name, fdt_strerror(ret));
- return ret;
- }
- }
- return ret;
-}
-
-/**
- * update_cpus_node - Update cpus node of flattened device tree using of_root
- * device node.
- * @fdt: Flattened device tree of the kernel.
- *
- * Returns 0 on success, negative errno on error.
- */
-static int update_cpus_node(void *fdt)
-{
- struct device_node *cpus_node, *dn;
- int cpus_offset, cpus_subnode_offset, ret = 0;
-
- cpus_offset = fdt_path_offset(fdt, "/cpus");
- if (cpus_offset < 0 && cpus_offset != -FDT_ERR_NOTFOUND) {
- pr_err("Malformed device tree: error reading /cpus node: %s\n",
- fdt_strerror(cpus_offset));
- return cpus_offset;
- }
-
- if (cpus_offset > 0) {
- ret = fdt_del_node(fdt, cpus_offset);
- if (ret < 0) {
- pr_err("Error deleting /cpus node: %s\n", fdt_strerror(ret));
- return -EINVAL;
- }
- }
-
- /* Add cpus node to fdt */
- cpus_offset = fdt_add_subnode(fdt, fdt_path_offset(fdt, "/"), "cpus");
- if (cpus_offset < 0) {
- pr_err("Error creating /cpus node: %s\n", fdt_strerror(cpus_offset));
- return -EINVAL;
- }
-
- /* Add cpus node properties */
- cpus_node = of_find_node_by_path("/cpus");
- ret = add_node_props(fdt, cpus_offset, cpus_node);
- of_node_put(cpus_node);
- if (ret < 0)
- return ret;
-
- /* Loop through all subnodes of cpus and add them to fdt */
- for_each_node_by_type(dn, "cpu") {
- cpus_subnode_offset = fdt_add_subnode(fdt, cpus_offset, dn->full_name);
- if (cpus_subnode_offset < 0) {
- pr_err("Unable to add %s subnode: %s\n", dn->full_name,
- fdt_strerror(cpus_subnode_offset));
- ret = cpus_subnode_offset;
- goto out;
- }
-
- ret = add_node_props(fdt, cpus_subnode_offset, dn);
- if (ret < 0)
- goto out;
- }
-out:
- of_node_put(dn);
- return ret;
-}
-
/**
* setup_new_fdt_ppc64 - Update the flattend device-tree of the kernel
* being loaded.--
2.36.1
Two major changes are done to enable the crash CPU hotplug handler.
Firstly, updated the kexec load path to prepare kimage for hotplug
changes, and secondly, implemented the arch specific crash hotplug
handler.
On the kexec load path, the memsz allocation for the crash FDT segment
is updated to ensure that it has sufficient buffer space to accommodate
future hot add CPUs. Additionally, kimage_arch struct member fdt_index
is initialized with the index of FDT segment in kexec segment array.
The crash hotplug handler updates the cpus node of crash FDT. While we
update crash FDT the kexec_crash_image is marked invalid and restored
after FDT update to avoid race.
Since memory crash hotplug support is not there yet the crash hotplug
handler simply warns the user and returns.
Signed-off-by: Sourabh Jain <redacted>
---
arch/powerpc/kexec/core_64.c | 49 ++++++++++++++++++++
arch/powerpc/kexec/elf_64.c | 74 +++++++++++++++++++++++++++++++
arch/powerpc/kexec/file_load_64.c | 5 +++
3 files changed, 128 insertions(+)
diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c
index 65b3afb2169a..6d448b55dfad 100644
--- a/arch/powerpc/kexec/core_64.c
+++ b/arch/powerpc/kexec/core_64.c
@@ -465,6 +465,55 @@ int update_cpus_node(void *fdt)
return ret;
}
+#if defined(CONFIG_HOTPLUG_CPU)
+
+int crash_hotplug_support(void) { return 1; }
+
+/**
+ * arch_crash_hotplug_handler() - Handle hotplug kexec segements changes FDT, elfcorehdr
+ * @image: the active struct kimage
+ * @hp_action: the hot un/plug action being handled
+ * @cpu: when KEXEC_CRASH_HP_ADD/REMOVE_CPU, the cpu affected
+ *
+ * To accurately reflect CPU hot un/plug changes, the FDT
+ * must be updated with the new list of CPUs.
+ */
+void arch_crash_handle_hotplug_event(struct kimage *image,
+ unsigned int hp_action, unsigned int cpu)
+
+{
+ void *fdt;
+
+ /* No action needed for CPU hot-unplug */
+ if (hp_action == KEXEC_CRASH_HP_REMOVE_CPU)
+ return;
+
+ /* crash update on memory hotplug is not support yet */
+ if (hp_action == KEXEC_CRASH_HP_REMOVE_MEMORY || hp_action == KEXEC_CRASH_HP_ADD_MEMORY) {
+ pr_info_once("crash hp: crash update is not supported with memory hotplug\n");
+ return;
+ }
+
+ /* Must have valid FDT index */
+ if (!image->arch.fdt_index < 0) {
+ pr_err("crash hp: unable to locate FDT segment");
+ return;
+ }
+
+ fdt = __va((void *)image->segment[image->arch.fdt_index].mem);
+
+ /* Temporarily invalidate the crash image while it is replaced */
+ xchg(&kexec_crash_image, NULL);
+
+ /* update FDT to refelect changes to CPU resrouces */
+ if (update_cpus_node(fdt))
+ pr_err("crash hp: failed to update crash FDT");
+
+ /* The crash image is now valid once again */
+ xchg(&kexec_crash_image, image);
+}
+#endif
+
#ifdef CONFIG_PPC_64S_HASH_MMU
/* Values we need to export to the second kernel via the device tree. */
static unsigned long htab_base;diff --git a/arch/powerpc/kexec/elf_64.c b/arch/powerpc/kexec/elf_64.c
index eeb258002d1e..8ef18d6c3c32 100644
--- a/arch/powerpc/kexec/elf_64.c
+++ b/arch/powerpc/kexec/elf_64.c
@@ -24,6 +24,68 @@
#include <linux/slab.h>
#include <linux/types.h>
+#include <asm/kvm_book3s.h>
+#include <asm/kvm_ppc.h>
+
+#if defined(CONFIG_HOTPLUG_CPU)
+/**
+ * get_cpu_node_sz() - Calculate the space needed to store a CPU device
+ * type node in FDT. The calculation is done based on
+ * the existing CPU node in unflatten device tree. Loop
+ * through all the properties of the very first CPU type
+ * device node found in unflatten device tree and returns
+ * the sum of the property length and property string size
+ * of all properties of a CPU node.
+ */
+static int get_cpu_node_sz(void)
+{
+ struct device_node *dn = NULL;
+ struct property *pp;
+ int cpu_node_size = 0;
+
+ dn = of_find_node_by_type(NULL, "cpu");
+
+ if (!dn) {
+ pr_warn("Unable to locate cpu device_type node.\n");
+ goto out;
+ }
+
+ /* Every node in FDT starts with FDT_BEGIN_NODE and ends with
+ * FDT_END_NODE that takes one byte each.
+ */
+ cpu_node_size = 2;
+
+ for_each_property_of_node(dn, pp) {
+ /**
+ * For each property add two bytes extra. One for string null
+ * character for property name and other for FDT property start
+ * tag FDT_PROP.
+ */
+ cpu_node_size = cpu_node_size + pp->length + strlen(pp->name) + 2;
+ }
+
+out:
+ return cpu_node_size;
+}
+
+/*
+ * get_crash_fdt_mem_sz() - calcuate mem size for crash kernel FDT
+ * @fdt: pointer to crash kernel FDT
+ *
+ * Calculate the buffer space needed to accommodate more CPU nodes in
+ * crash FDT post capture kernel load due to CPU hotplug events.
+ */
+static unsigned int get_crash_fdt_mem_sz(void *fdt)
+{
+ int fdt_cpu_nodes_sz, offline_cpu_cnt;
+
+ offline_cpu_cnt = (num_possible_cpus() - num_present_cpus()) / MAX_SMT_THREADS;
+ fdt_cpu_nodes_sz = get_cpu_node_sz() * offline_cpu_cnt;
+
+ return fdt_totalsize(fdt) + fdt_cpu_nodes_sz;
+}
+#endif
+
static void *elf64_load(struct kimage *image, char *kernel_buf,
unsigned long kernel_len, char *initrd,
unsigned long initrd_len, char *cmdline,@@ -123,6 +185,18 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
kbuf.buf_align = PAGE_SIZE;
kbuf.top_down = true;
kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+
+#if defined(CONFIG_HOTPLUG_CPU)
+ if (image->type == KEXEC_TYPE_CRASH) {
+ kbuf.memsz = get_crash_fdt_mem_sz(fdt);
+ fdt_set_totalsize(fdt, kbuf.memsz);
+ image->arch.fdt_index = image->nr_segments;
+ } else
+#endif
+ {
+ kbuf.memsz = fdt_totalsize(fdt);
+ }
+
ret = kexec_add_buffer(&kbuf);
if (ret)
goto out_free_fdt;diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c
index 57f991b0a9da..8345c4f5316d 100644
--- a/arch/powerpc/kexec/file_load_64.c
+++ b/arch/powerpc/kexec/file_load_64.c
@@ -1116,6 +1116,11 @@ int arch_kexec_kernel_image_probe(struct kimage *image, void *buf,
return ret;
}
+#if defined(CONFIG_HOTPLUG_CPU)
+ /* Mark fdt_index invalid */
+ image->arch.fdt_index = -1;
+#endif
+
return kexec_image_probe_default(image, buf, buf_len);
}
--
2.36.1
On 20/06/2022, 09:01:02, Sourabh Jain wrote:
Make the update_cpus_node function non-static and export it for
usage in other kexec components.
The update_cpus_node definition is moved to core_64.c so that it
can be used with both kexec_load and kexec_file_load system calls.
No functional change intended.
And FWIW
Reviewed-by: Laurent Dufour <redacted>
quoted hunk
Signed-off-by: Sourabh Jain <redacted>
---
arch/powerpc/include/asm/kexec.h | 1 +
arch/powerpc/kexec/core_64.c | 88 +++++++++++++++++++++++++++++++
arch/powerpc/kexec/file_load_64.c | 87 ------------------------------
3 files changed, 89 insertions(+), 87 deletions(-)
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 2aefe14e1442..c8040c93b15a 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -129,6 +129,7 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image);
int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
unsigned long initrd_load_addr,
unsigned long initrd_len, const char *cmdline);
+int update_cpus_node(void *fdt);
#endif /* CONFIG_PPC64 */
#endif /* CONFIG_KEXEC_FILE */
diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c
index 6cc7793b8420..65b3afb2169a 100644
--- a/arch/powerpc/kexec/core_64.c
+++ b/arch/powerpc/kexec/core_64.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/cpu.h>
#include <linux/hardirq.h>
+#include <linux/libfdt.h>
#include <asm/page.h>
#include <asm/current.h>
@@ -377,6 +378,93 @@ void default_machine_kexec(struct kimage *image)
/* NOTREACHED */
}
+/**
+ * add_node_props - Reads node properties from device node structure and add
+ * them to fdt.
+ * @fdt: Flattened device tree of the kernel
+ * @node_offset: offset of the node to add a property at
+ * @dn: device node pointer
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int add_node_props(void *fdt, int node_offset, const struct device_node *dn)
+{
+ int ret = 0;
+ struct property *pp;
+
+ if (!dn)
+ return -EINVAL;
+
+ for_each_property_of_node(dn, pp) {
+ ret = fdt_setprop(fdt, node_offset, pp->name, pp->value, pp->length);
+ if (ret < 0) {
+ pr_err("Unable to add %s property: %s\n", pp->name, fdt_strerror(ret));
+ return ret;
+ }
+ }
+ return ret;
+}
+
+/**
+ * update_cpus_node - Update cpus node of flattened device tree using of_root
+ * device node.
+ * @fdt: Flattened device tree of the kernel.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+int update_cpus_node(void *fdt)
+{
+ struct device_node *cpus_node, *dn;
+ int cpus_offset, cpus_subnode_offset, ret = 0;
+
+ cpus_offset = fdt_path_offset(fdt, "/cpus");
+ if (cpus_offset < 0 && cpus_offset != -FDT_ERR_NOTFOUND) {
+ pr_err("Malformed device tree: error reading /cpus node: %s\n",
+ fdt_strerror(cpus_offset));
+ return cpus_offset;
+ }
+
+ if (cpus_offset > 0) {
+ ret = fdt_del_node(fdt, cpus_offset);
+ if (ret < 0) {
+ pr_err("Error deleting /cpus node: %s\n", fdt_strerror(ret));
+ return -EINVAL;
+ }
+ }
+
+ /* Add cpus node to fdt */
+ cpus_offset = fdt_add_subnode(fdt, fdt_path_offset(fdt, "/"), "cpus");
+ if (cpus_offset < 0) {
+ pr_err("Error creating /cpus node: %s\n", fdt_strerror(cpus_offset));
+ return -EINVAL;
+ }
+
+ /* Add cpus node properties */
+ cpus_node = of_find_node_by_path("/cpus");
+ ret = add_node_props(fdt, cpus_offset, cpus_node);
+ of_node_put(cpus_node);
+ if (ret < 0)
+ return ret;
+
+ /* Loop through all subnodes of cpus and add them to fdt */
+ for_each_node_by_type(dn, "cpu") {
+ cpus_subnode_offset = fdt_add_subnode(fdt, cpus_offset, dn->full_name);
+ if (cpus_subnode_offset < 0) {
+ pr_err("Unable to add %s subnode: %s\n", dn->full_name,
+ fdt_strerror(cpus_subnode_offset));
+ ret = cpus_subnode_offset;
+ goto out;
+ }
+
+ ret = add_node_props(fdt, cpus_subnode_offset, dn);
+ if (ret < 0)
+ goto out;
+ }
+out:
+ of_node_put(dn);
+ return ret;
+}
+
#ifdef CONFIG_PPC_64S_HASH_MMU
/* Values we need to export to the second kernel via the device tree. */
static unsigned long htab_base;diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c
index 07da6bf1cf24..57f991b0a9da 100644
--- a/arch/powerpc/kexec/file_load_64.c
+++ b/arch/powerpc/kexec/file_load_64.c
@@ -951,93 +951,6 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image)
return (unsigned int)(usm_entries * sizeof(u64));
}
-/**
- * add_node_props - Reads node properties from device node structure and add
- * them to fdt.
- * @fdt: Flattened device tree of the kernel
- * @node_offset: offset of the node to add a property at
- * @dn: device node pointer
- *
- * Returns 0 on success, negative errno on error.
- */
-static int add_node_props(void *fdt, int node_offset, const struct device_node *dn)
-{
- int ret = 0;
- struct property *pp;
-
- if (!dn)
- return -EINVAL;
-
- for_each_property_of_node(dn, pp) {
- ret = fdt_setprop(fdt, node_offset, pp->name, pp->value, pp->length);
- if (ret < 0) {
- pr_err("Unable to add %s property: %s\n", pp->name, fdt_strerror(ret));
- return ret;
- }
- }
- return ret;
-}
-
-/**
- * update_cpus_node - Update cpus node of flattened device tree using of_root
- * device node.
- * @fdt: Flattened device tree of the kernel.
- *
- * Returns 0 on success, negative errno on error.
- */
-static int update_cpus_node(void *fdt)
-{
- struct device_node *cpus_node, *dn;
- int cpus_offset, cpus_subnode_offset, ret = 0;
-
- cpus_offset = fdt_path_offset(fdt, "/cpus");
- if (cpus_offset < 0 && cpus_offset != -FDT_ERR_NOTFOUND) {
- pr_err("Malformed device tree: error reading /cpus node: %s\n",
- fdt_strerror(cpus_offset));
- return cpus_offset;
- }
-
- if (cpus_offset > 0) {
- ret = fdt_del_node(fdt, cpus_offset);
- if (ret < 0) {
- pr_err("Error deleting /cpus node: %s\n", fdt_strerror(ret));
- return -EINVAL;
- }
- }
-
- /* Add cpus node to fdt */
- cpus_offset = fdt_add_subnode(fdt, fdt_path_offset(fdt, "/"), "cpus");
- if (cpus_offset < 0) {
- pr_err("Error creating /cpus node: %s\n", fdt_strerror(cpus_offset));
- return -EINVAL;
- }
-
- /* Add cpus node properties */
- cpus_node = of_find_node_by_path("/cpus");
- ret = add_node_props(fdt, cpus_offset, cpus_node);
- of_node_put(cpus_node);
- if (ret < 0)
- return ret;
-
- /* Loop through all subnodes of cpus and add them to fdt */
- for_each_node_by_type(dn, "cpu") {
- cpus_subnode_offset = fdt_add_subnode(fdt, cpus_offset, dn->full_name);
- if (cpus_subnode_offset < 0) {
- pr_err("Unable to add %s subnode: %s\n", dn->full_name,
- fdt_strerror(cpus_subnode_offset));
- ret = cpus_subnode_offset;
- goto out;
- }
-
- ret = add_node_props(fdt, cpus_subnode_offset, dn);
- if (ret < 0)
- goto out;
- }
-out:
- of_node_put(dn);
- return ret;
-}
-
/**
* setup_new_fdt_ppc64 - Update the flattend device-tree of the kernel
* being loaded.
On 20/06/2022, 09:01:04, Sourabh Jain wrote:
Two major changes are done to enable the crash CPU hotplug handler.
Firstly, updated the kexec load path to prepare kimage for hotplug
changes, and secondly, implemented the arch specific crash hotplug
handler.
On the kexec load path, the memsz allocation for the crash FDT segment
is updated to ensure that it has sufficient buffer space to accommodate
future hot add CPUs. Additionally, kimage_arch struct member fdt_index
^
added ?is initialized with the index of FDT segment in kexec segment array.
May be you should mention that the index of FDT segment is recorded to not
fetch it at each hotplug operation.
The crash hotplug handler updates the cpus node of crash FDT. While we
update crash FDT the kexec_crash_image is marked invalid and restored
after FDT update to avoid race.
Since memory crash hotplug support is not there yet the crash hotplug
handler simply warns the user and returns.
It might be good to explain here why CPU hot remove operations are ignored.
quoted hunk
Signed-off-by: Sourabh Jain <redacted>
---
arch/powerpc/kexec/core_64.c | 49 ++++++++++++++++++++
arch/powerpc/kexec/elf_64.c | 74 +++++++++++++++++++++++++++++++
arch/powerpc/kexec/file_load_64.c | 5 +++
3 files changed, 128 insertions(+)
diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c
index 65b3afb2169a..6d448b55dfad 100644
--- a/arch/powerpc/kexec/core_64.c
+++ b/arch/powerpc/kexec/core_64.c
@@ -465,6 +465,55 @@ int update_cpus_node(void *fdt)
return ret;
}
+#if defined(CONFIG_HOTPLUG_CPU)
+
+int crash_hotplug_support(void) { return 1; }
+
+/**
+ * arch_crash_hotplug_handler() - Handle hotplug kexec segements changes FDT, elfcorehdr
+ * @image: the active struct kimage
+ * @hp_action: the hot un/plug action being handled
+ * @cpu: when KEXEC_CRASH_HP_ADD/REMOVE_CPU, the cpu affected
+ *
+ * To accurately reflect CPU hot un/plug changes, the FDT
+ * must be updated with the new list of CPUs.
+ */
+void arch_crash_handle_hotplug_event(struct kimage *image,
+ unsigned int hp_action, unsigned int cpu)
+
+{
+ void *fdt;
+
+ /* No action needed for CPU hot-unplug */
Why?
I think your comment should explain why CPU hot-unplug operations are ignored?
+ if (hp_action == KEXEC_CRASH_HP_REMOVE_CPU)
+ return;
+
+ /* crash update on memory hotplug is not support yet */
+ if (hp_action == KEXEC_CRASH_HP_REMOVE_MEMORY || hp_action == KEXEC_CRASH_HP_ADD_MEMORY) {
+ pr_info_once("crash hp: crash update is not supported with memory hotplug\n");
+ return;
+ }
+
+ /* Must have valid FDT index */
+ if (!image->arch.fdt_index < 0) {
if (image->arch.fdt_index >= 0) {
I think this is easier to read.
quoted hunk
+ pr_err("crash hp: unable to locate FDT segment");
+ return;
+ }
+
+ fdt = __va((void *)image->segment[image->arch.fdt_index].mem);
+
+ /* Temporarily invalidate the crash image while it is replaced */
+ xchg(&kexec_crash_image, NULL);
+
+ /* update FDT to refelect changes to CPU resrouces */
+ if (update_cpus_node(fdt))
+ pr_err("crash hp: failed to update crash FDT");
+
+ /* The crash image is now valid once again */
+ xchg(&kexec_crash_image, image);
+}
+#endif
+
#ifdef CONFIG_PPC_64S_HASH_MMU
/* Values we need to export to the second kernel via the device tree. */
static unsigned long htab_base;diff --git a/arch/powerpc/kexec/elf_64.c b/arch/powerpc/kexec/elf_64.c
index eeb258002d1e..8ef18d6c3c32 100644
--- a/arch/powerpc/kexec/elf_64.c
+++ b/arch/powerpc/kexec/elf_64.c
@@ -24,6 +24,68 @@
#include <linux/slab.h>
#include <linux/types.h>
+#include <asm/kvm_book3s.h>
+#include <asm/kvm_ppc.h>
Are these 2 KVM specifics headers really required?
+
+#if defined(CONFIG_HOTPLUG_CPU)
+/**
+ * get_cpu_node_sz() - Calculate the space needed to store a CPU device
+ * type node in FDT. The calculation is done based on
+ * the existing CPU node in unflatten device tree. Loop
+ * through all the properties of the very first CPU type
+ * device node found in unflatten device tree and returns
+ * the sum of the property length and property string size
+ * of all properties of a CPU node.
This indentation style looks weird to me.
+ */
+static int get_cpu_node_sz(void)
+{
+ struct device_node *dn = NULL;
There is no need to initialize dn here, it is assigned right after
+ struct property *pp;
+ int cpu_node_size = 0;
+
+ dn = of_find_node_by_type(NULL, "cpu");
+
+ if (!dn) {
+ pr_warn("Unable to locate cpu device_type node.\n");
+ goto out;
You could return 0 here, and remove the initialization of cpu_node_size.
+ }
+
+ /* Every node in FDT starts with FDT_BEGIN_NODE and ends with
+ * FDT_END_NODE that takes one byte each.
+ */
+ cpu_node_size = 2;
+
+ for_each_property_of_node(dn, pp) {
+ /**
+ * For each property add two bytes extra. One for string null
+ * character for property name and other for FDT property start
+ * tag FDT_PROP.
+ */
+ cpu_node_size = cpu_node_size + pp->length + strlen(pp->name) + 2;
cpu_node_size += pp->length + strlen(pp->name) + 2;
This shortens a bit that line.
quoted hunk
+ }
+
+out:
+ return cpu_node_size;
+}
+
+/*
+ * get_crash_fdt_mem_sz() - calcuate mem size for crash kernel FDT
+ * @fdt: pointer to crash kernel FDT
+ *
+ * Calculate the buffer space needed to accommodate more CPU nodes in
+ * crash FDT post capture kernel load due to CPU hotplug events.
+ */
+static unsigned int get_crash_fdt_mem_sz(void *fdt)
+{
+ int fdt_cpu_nodes_sz, offline_cpu_cnt;
+
+ offline_cpu_cnt = (num_possible_cpus() - num_present_cpus()) / MAX_SMT_THREADS;
+ fdt_cpu_nodes_sz = get_cpu_node_sz() * offline_cpu_cnt;
+
+ return fdt_totalsize(fdt) + fdt_cpu_nodes_sz;
+}
+#endif
+
static void *elf64_load(struct kimage *image, char *kernel_buf,
unsigned long kernel_len, char *initrd,
unsigned long initrd_len, char *cmdline,@@ -123,6 +185,18 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
kbuf.buf_align = PAGE_SIZE;
kbuf.top_down = true;
kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
+
+#if defined(CONFIG_HOTPLUG_CPU)
+ if (image->type == KEXEC_TYPE_CRASH) {
+ kbuf.memsz = get_crash_fdt_mem_sz(fdt);
Why do you keep the previous assignment of kbuf.memsz few lines ago :
kbuf.buffer = fdt;
kbuf.bufsz = kbuf.memsz = fdt_totalsize(fdt); <<<<<
kbuf.buf_align = PAGE_SIZE;
kbuf.top_down = true;
kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
#if defined(CONFIG_HOTPLUG_CPU)
if (image->type == KEXEC_TYPE_CRASH) {
kbuf.memsz = get_crash_fdt_mem_sz(fdt);
fdt_set_totalsize(fdt, kbuf.memsz);
image->arch.fdt_index = image->nr_segments;
} else
#endif
{
kbuf.memsz = fdt_totalsize(fdt);
}
And what about kbuf.bufsz?
+ fdt_set_totalsize(fdt, kbuf.memsz);
+ image->arch.fdt_index = image->nr_segments;
+ } else
+#endif
+ {
+ kbuf.memsz = fdt_totalsize(fdt);
Why not setting image->arch.fdt_index to -1 here?
quoted hunk
+ }
+
ret = kexec_add_buffer(&kbuf);
if (ret)
goto out_free_fdt;
diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c
index 57f991b0a9da..8345c4f5316d 100644
--- a/arch/powerpc/kexec/file_load_64.c
+++ b/arch/powerpc/kexec/file_load_64.c
@@ -1116,6 +1116,11 @@ int arch_kexec_kernel_image_probe(struct kimage *image, void *buf,
return ret;
}
+#if defined(CONFIG_HOTPLUG_CPU)
+ /* Mark fdt_index invalid */
+ image->arch.fdt_index = -1;
Why doing this here instead of elf64_load()?
I think your patch only applies to the ELF image format, isn't it?
Cheers,
Laurent.
+#endif
+
return kexec_image_probe_default(image, buf, buf_len);
}
On 20/06/2022, 09:01:05, Sourabh Jain wrote:
quoted hunk
A common crash hotplug handler is used for both kexec_load and
kexec_file_load, which is already implemented in earlier patches while
adding support for kexec_file_load.
To enable the crash hotplug handler to work for kexec_load case the
fdt_index attribute of kimage_arch needs to be populated with index of
FDT segment in kexec segment array.
After loading kexec segments the FDT segment is identified by looping
through all the kexec segments and fdt_index is updated accordingly.
Signed-off-by: Sourabh Jain <redacted>
---
arch/powerpc/kexec/core_64.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c
index 6d448b55dfad..373cb46bcc0e 100644
--- a/arch/powerpc/kexec/core_64.c
+++ b/arch/powerpc/kexec/core_64.c
@@ -74,6 +74,31 @@ int machine_kexec_prepare(struct kimage *image)
return 0;
}
+#if defined(CONFIG_HOTPLUG_CPU)
+int machine_kexec_post_load(struct kimage *kimage)
+{
+ int i;
+ void *ptr;
+ unsigned long mem;
+
+ if (kimage->type != KEXEC_TYPE_CRASH)
+ return 0;
+
+ /* Mark fdt_index invalid */
+ kimage->arch.fdt_index = -1;
If fdt_index should be set to -1, this should be done in
machine_kexec_prepare(). Anyway, there is no need to set it to -1 because
this image will not be registered in do_kexec_load() before the following
loop is complete.
+
+ for (i = 0; i < kimage->nr_segments; i++) {
+ mem = kimage->segment[i].mem;
+ ptr = __va(mem);
+
+ if (ptr && fdt_magic(ptr) == FDT_MAGIC)
+ kimage->arch.fdt_index = i;
break;
there is no need to check the other segments, isn't it?
Cheers,
Laurent.
+ }
+
+ return 0;
+}
+#endif
+
/* Called during kexec sequence with MMU off */
static notrace void copy_segments(unsigned long ind)
{