# Re: \[PATCH v6 28/29\] x86/tsc: Restart NMI watchdog after refining tsc\_khz

- From: Ricardo Neri \<hidden\>
- Date: 2022-05-17 22:04:38 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2022/05/1785813
- Thread: https://ratatoskr.run/linuxppc-dev/2022/05/1771745/t.md

```text
On Tue, May 10, 2022 at 09:16:21PM +1000, Nicholas Piggin wrote:
> Excerpts from Ricardo Neri's message of May 6, 2022 10:00 am:
> > The HPET hardlockup detector relies on tsc_khz to estimate the value of
> > that the TSC will have when its HPET channel fires. A refined tsc_khz
> > helps to estimate better the expected TSC value.
> > 
> > Using the early value of tsc_khz may lead to a large error in the expected
> > TSC value. Restarting the NMI watchdog detector has the effect of kicking
> > its HPET channel and make use of the refined tsc_khz.
> > 
> > When the HPET hardlockup is not in use, restarting the NMI watchdog is
> > a noop.
> > 
> > Cc: Andi Kleen <redacted>
> > Cc: Stephane Eranian <redacted>
> > Cc: "Ravi V. Shankar" <redacted>
> > Cc: <redacted>
> > Cc: <redacted>
> > Cc: x86@kernel.org
> > Signed-off-by: Ricardo Neri <redacted>
> > ---
> > Changes since v5:
> >  * Introduced this patch
> > 
> > Changes since v4
> >  * N/A
> > 
> > Changes since v3
> >  * N/A
> > 
> > Changes since v2:
> >  * N/A
> > 
> > Changes since v1:
> >  * N/A
> > ---
> >  arch/x86/kernel/tsc.c | 6 ++++++
> >  1 file changed, 6 insertions(+)
> > 
> > diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
> > index cafacb2e58cc..cc1843044d88 100644
> > --- a/arch/x86/kernel/tsc.c
> > +++ b/arch/x86/kernel/tsc.c
> > @@ -1386,6 +1386,12 @@ static void tsc_refine_calibration_work(struct work_struct *work)
> >  	/* Inform the TSC deadline clockevent devices about the recalibration */
> >  	lapic_update_tsc_freq();
> >  
> > +	/*
> > +	 * If in use, the HPET hardlockup detector relies on tsc_khz.
> > +	 * Reconfigure it to make use of the refined tsc_khz.
> > +	 */
> > +	lockup_detector_reconfigure();
> 
> I don't know if the API is conceptually good.
> 
> You change something that the lockup detector is currently using, 
> *while* the detector is running asynchronously, and then reconfigure
> it. 

Yes, this is what happens.

> What happens in the window? If this code is only used for small
> adjustments maybe it does not really matter

Please see my comment

> but in principle it's a bad API to export.
> 
> lockup_detector_reconfigure as an internal API is okay because it
> reconfigures things while the watchdog is stopped

I see.

> [actually that  looks untrue for soft dog which uses watchdog_thresh in
> is_softlockup(), but that should be fixed].

Perhaps there should be a watchdog_thresh_user. When the user updates it,
the detector is stopped, watchdog_thresh is updated, and then the detector
is resumed.

> 
> You're the arch so you're allowed to stop the watchdog and configure
> it, e.g., hardlockup_detector_perf_stop() is called in arch/.

I had it like this but it did not look right to me. You are right, however,
I can stop/restart the watchdog when needed.

Thanks and BR,
Ricardo
```
