[PATCH v2 0/7] Generic Command Line changes

STALE2002d

Revision v2 of 2 in this series.

2 messages, 2 authors, 2021-03-09 · open the first message on its own page

[PATCH v2 0/7] Generic Command Line changes

From: Daniel Walker <hidden>
Date: 2021-03-08 23:54:00

This fixed some problem identified in my last release. I made updates
based on comments from Christophe Leroy.

I added scripted updates to the defconfig file for mips and powerpc.
This is required in order to maintain the status quo for those platforms
which used the prior builtin command line system.

These were tested on all effected architectures.

Daniel Walker (7):
  CMDLINE: add generic builtin command line
  CMDLINE: drivers: of: ifdef out cmdline section
  powerpc: convert config files to generic cmdline
  CMDLINE: powerpc: convert to generic builtin command line
  mips: convert config files to generic cmdline
  CMDLINE: mips: convert to generic builtin command line
  CMDLINE: x86: convert to generic builtin command line

 arch/mips/Kconfig                             |  4 +-
 arch/mips/Kconfig.debug                       | 44 ---------
 arch/mips/configs/ar7_defconfig               |  9 +-
 arch/mips/configs/bcm47xx_defconfig           |  8 +-
 arch/mips/configs/bcm63xx_defconfig           | 15 ++--
 arch/mips/configs/bmips_be_defconfig          | 11 +--
 arch/mips/configs/bmips_stb_defconfig         | 11 +--
 arch/mips/configs/capcella_defconfig          | 11 +--
 arch/mips/configs/ci20_defconfig              | 10 +--
 arch/mips/configs/cu1000-neo_defconfig        | 10 +--
 arch/mips/configs/cu1830-neo_defconfig        | 10 +--
 arch/mips/configs/e55_defconfig               |  4 +-
 arch/mips/configs/generic_defconfig           |  6 +-
 arch/mips/configs/gpr_defconfig               | 18 +---
 arch/mips/configs/loongson3_defconfig         | 13 +--
 arch/mips/configs/mpc30x_defconfig            |  7 +-
 arch/mips/configs/tb0219_defconfig            |  7 +-
 arch/mips/configs/tb0226_defconfig            |  7 +-
 arch/mips/configs/tb0287_defconfig            |  7 +-
 arch/mips/configs/workpad_defconfig           | 11 +--
 arch/mips/kernel/setup.c                      | 36 +-------
 arch/powerpc/Kconfig                          | 37 +-------
 arch/powerpc/configs/44x/fsp2_defconfig       | 33 ++++---
 arch/powerpc/configs/44x/iss476-smp_defconfig | 25 +++---
 arch/powerpc/configs/44x/warp_defconfig       | 17 ++--
 arch/powerpc/configs/holly_defconfig          | 13 +--
 arch/powerpc/configs/mvme5100_defconfig       | 23 ++---
 arch/powerpc/configs/skiroot_defconfig        | 12 ++-
 arch/powerpc/configs/storcenter_defconfig     | 18 ++--
 arch/powerpc/kernel/prom.c                    |  1 +
 arch/powerpc/kernel/prom_init.c               | 35 +++++---
 arch/x86/Kconfig                              | 44 +--------
 arch/x86/kernel/setup.c                       | 18 +---
 drivers/firmware/efi/libstub/x86-stub.c       |  2 +-
 drivers/of/fdt.c                              | 12 +++
 include/linux/cmdline.h                       | 89 +++++++++++++++++++
 init/Kconfig                                  | 68 ++++++++++++++
 37 files changed, 321 insertions(+), 385 deletions(-)
 create mode 100644 include/linux/cmdline.h

-- 
2.25.1

Re: [PATCH v2 0/7] Generic Command Line changes

From: Randy Dunlap <rdunlap@infradead.org>
Date: 2021-03-09 01:18:48

On 3/8/21 3:53 PM, Daniel Walker wrote:
This fixed some problem identified in my last release. I made updates
based on comments from Christophe Leroy.

I added scripted updates to the defconfig file for mips and powerpc.
This is required in order to maintain the status quo for those platforms
which used the prior builtin command line system.

These were tested on all effected architectures.

Daniel Walker (7):
  CMDLINE: add generic builtin command line
  CMDLINE: drivers: of: ifdef out cmdline section
  powerpc: convert config files to generic cmdline
  CMDLINE: powerpc: convert to generic builtin command line
  mips: convert config files to generic cmdline
  CMDLINE: mips: convert to generic builtin command line
  CMDLINE: x86: convert to generic builtin command line

Hi Daniel,

These patches (1 - 7) should be sent as a Reply-to patch #0.

In .gitconfig, could you use
	thread = true

or use --thread on the command line?

HTH.
thanks.
-- 
~Randy
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help