[PATCH] powerpc/prom: Fix "ibm,arch-vec-5-platform-support" scan

Subsystems: linux for powerpc (32-bit and 64-bit), the rest

STALE2035d LANDED

Landed in mainline as ed5b00a05c2a on 2021-01-31.

3 messages, 3 authors, 2021-02-03 · open the first message on its own page

[PATCH] powerpc/prom: Fix "ibm,arch-vec-5-platform-support" scan

From: Cédric Le Goater <clg@kaod.org>
Date: 2021-01-22 07:51:45

The "ibm,arch-vec-5-platform-support" property is a list of pairs of
bytes representing the options and values supported by the platform
firmware. At boot time, Linux scans this list and activates the
available features it recognizes : Radix and XIVE.

A recent change modified the number of entries to loop on and 8 bytes,
4 pairs of { options, values } entries are always scanned. This is
fine on KVM but not on PowerVM which can advertises less. As a
consequence on this platform, Linux reads extra entries pointing to
random data, interprets these as available features and tries to
activate them, leading to a firmware crash in
ibm,client-architecture-support.

Fix that by using the property length of "ibm,arch-vec-5-platform-support".

Cc: stable@vger.kernel.org # v4.20+
Fixes: ab91239942a9 ("powerpc/prom: Remove VLA in prom_check_platform_support()")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 arch/powerpc/kernel/prom_init.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index e9d4eb6144e1..ccf77b985c8f 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1331,14 +1331,10 @@ static void __init prom_check_platform_support(void)
 		if (prop_len > sizeof(vec))
 			prom_printf("WARNING: ibm,arch-vec-5-platform-support longer than expected (len: %d)\n",
 				    prop_len);
-		prom_getprop(prom.chosen, "ibm,arch-vec-5-platform-support",
-			     &vec, sizeof(vec));
-		for (i = 0; i < sizeof(vec); i += 2) {
-			prom_debug("%d: index = 0x%x val = 0x%x\n", i / 2
-								  , vec[i]
-								  , vec[i + 1]);
-			prom_parse_platform_support(vec[i], vec[i + 1],
-						    &supported);
+		prom_getprop(prom.chosen, "ibm,arch-vec-5-platform-support", &vec, sizeof(vec));
+		for (i = 0; i < prop_len; i += 2) {
+			prom_debug("%d: index = 0x%x val = 0x%x\n", i / 2, vec[i], vec[i + 1]);
+			prom_parse_platform_support(vec[i], vec[i + 1], &supported);
 		}
 	}
 
-- 
2.26.2

Re: [PATCH] powerpc/prom: Fix "ibm,arch-vec-5-platform-support" scan

From: Fabiano Rosas <hidden>
Date: 2021-01-22 13:26:49

Cédric Le Goater [off-list ref] writes:
The "ibm,arch-vec-5-platform-support" property is a list of pairs of
bytes representing the options and values supported by the platform
firmware. At boot time, Linux scans this list and activates the
available features it recognizes : Radix and XIVE.

A recent change modified the number of entries to loop on and 8 bytes,
4 pairs of { options, values } entries are always scanned. This is
fine on KVM but not on PowerVM which can advertises less. As a
consequence on this platform, Linux reads extra entries pointing to
random data, interprets these as available features and tries to
activate them, leading to a firmware crash in
ibm,client-architecture-support.

Fix that by using the property length of "ibm,arch-vec-5-platform-support".

Cc: stable@vger.kernel.org # v4.20+
Fixes: ab91239942a9 ("powerpc/prom: Remove VLA in prom_check_platform_support()")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <redacted>
quoted hunk
---
 arch/powerpc/kernel/prom_init.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index e9d4eb6144e1..ccf77b985c8f 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1331,14 +1331,10 @@ static void __init prom_check_platform_support(void)
 		if (prop_len > sizeof(vec))
 			prom_printf("WARNING: ibm,arch-vec-5-platform-support longer than expected (len: %d)\n",
 				    prop_len);
-		prom_getprop(prom.chosen, "ibm,arch-vec-5-platform-support",
-			     &vec, sizeof(vec));
-		for (i = 0; i < sizeof(vec); i += 2) {
-			prom_debug("%d: index = 0x%x val = 0x%x\n", i / 2
-								  , vec[i]
-								  , vec[i + 1]);
-			prom_parse_platform_support(vec[i], vec[i + 1],
-						    &supported);
+		prom_getprop(prom.chosen, "ibm,arch-vec-5-platform-support", &vec, sizeof(vec));
+		for (i = 0; i < prop_len; i += 2) {
+			prom_debug("%d: index = 0x%x val = 0x%x\n", i / 2, vec[i], vec[i + 1]);
+			prom_parse_platform_support(vec[i], vec[i + 1], &supported);
 		}
 	}

Re: [PATCH] powerpc/prom: Fix "ibm,arch-vec-5-platform-support" scan

From: Michael Ellerman <hidden>
Date: 2021-02-03 12:20:20

On Fri, 22 Jan 2021 08:50:29 +0100, C��dric Le Goater wrote:
The "ibm,arch-vec-5-platform-support" property is a list of pairs of
bytes representing the options and values supported by the platform
firmware. At boot time, Linux scans this list and activates the
available features it recognizes : Radix and XIVE.

A recent change modified the number of entries to loop on and 8 bytes,
4 pairs of { options, values } entries are always scanned. This is
fine on KVM but not on PowerVM which can advertises less. As a
consequence on this platform, Linux reads extra entries pointing to
random data, interprets these as available features and tries to
activate them, leading to a firmware crash in
ibm,client-architecture-support.

[...]
Applied to powerpc/next.

[1/1] powerpc/prom: Fix "ibm,arch-vec-5-platform-support" scan
      https://git.kernel.org/powerpc/c/ed5b00a05c2ae95b59adc3442f45944ec632e794

cheers
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help