# Re: \[PATCH v3 devicetree 2/2\] powerpc: dts: t1040rdb: add ports for Seville Ethernet switch

- From: Andrew Lunn \<andrew@lunn.ch\>
- Date: 2020-10-01 13:23:12 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2020/10/6127356
- Thread: https://ratatoskr.run/linux-devicetree/2020/10/6127350/t.md

```text
On Thu, Oct 01, 2020 at 04:20:13PM +0300, Vladimir Oltean wrote:
> Define the network interface names for the switch ports and hook them up
> to the 2 QSGMII PHYs that are onboard.
> 
> A conscious decision was taken to go along with the numbers that are
> written on the front panel of the board and not with the hardware
> numbers of the switch chip ports. The 2 numbering schemes are
> shifted by 8.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Reviewed-by: Maxim Kochetkov <redacted>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
```