[PATCH] sfc_ef100: Fix build failure on powerpc

Subsystems: networking drivers, sfc network driver, the rest

STALE2182d

3 messages, 3 authors, 2020-08-13 · open the first message on its own page

[PATCH] sfc_ef100: Fix build failure on powerpc

From: Christophe Leroy <hidden>
Date: 2020-08-13 14:39:16

ppc6xx_defconfig fails building sfc.ko module, complaining
about the lack of _umoddi3 symbol.

This is due to the following test

 		if (EFX_MIN_DMAQ_SIZE % reader->value) {

Because reader->value is u64.

As EFX_MIN_DMAQ_SIZE value is 512, reader->value is obviously small
enough for an u32 calculation, so cast it as (u32) for the test, to
avoid the need for _umoddi3.

Fixes: adcfc3482fff ("sfc_ef100: read Design Parameters at probe time")
Signed-off-by: Christophe Leroy <redacted>
---
 drivers/net/ethernet/sfc/ef100_nic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/sfc/ef100_nic.c b/drivers/net/ethernet/sfc/ef100_nic.c
index 36598d0542ed..234400b69b07 100644
--- a/drivers/net/ethernet/sfc/ef100_nic.c
+++ b/drivers/net/ethernet/sfc/ef100_nic.c
@@ -979,7 +979,7 @@ static int ef100_process_design_param(struct efx_nic *efx,
 		 * EFX_MIN_DMAQ_SIZE is divisible by GRANULARITY.
 		 * This is very unlikely to fail.
 		 */
-		if (EFX_MIN_DMAQ_SIZE % reader->value) {
+		if (EFX_MIN_DMAQ_SIZE % (u32)reader->value) {
 			netif_err(efx, probe, efx->net_dev,
 				  "%s size granularity is %llu, can't guarantee safety\n",
 				  reader->type == ESE_EF100_DP_GZ_RXQ_SIZE_GRANULARITY ? "RXQ" : "TXQ",
-- 
2.25.0

Re: [PATCH] sfc_ef100: Fix build failure on powerpc

From: Edward Cree <hidden>
Date: 2020-08-13 14:55:37

On 13/08/2020 15:39, Christophe Leroy wrote:
ppc6xx_defconfig fails building sfc.ko module, complaining
about the lack of _umoddi3 symbol.

This is due to the following test

 		if (EFX_MIN_DMAQ_SIZE % reader->value) {

Because reader->value is u64.
Already fixed in net.git by 41077c990266 ("sfc: fix ef100 design-param checking").
But thanks anyway.

Re: [PATCH] sfc_ef100: Fix build failure on powerpc

From: Segher Boessenkool <hidden>
Date: 2020-08-13 15:58:00

On Thu, Aug 13, 2020 at 02:39:10PM +0000, Christophe Leroy wrote:
ppc6xx_defconfig fails building sfc.ko module, complaining
about the lack of _umoddi3 symbol.

This is due to the following test

 		if (EFX_MIN_DMAQ_SIZE % reader->value) {

Because reader->value is u64.

As EFX_MIN_DMAQ_SIZE value is 512, reader->value is obviously small
enough for an u32 calculation, so cast it as (u32) for the test, to
avoid the need for _umoddi3.
That isn't the same e.g. if reader->value is 2**32 + small.  Which
probably cannot happen, but :-)


Segher
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help