[PATCH v2] tty: serial: cpm_uart: Fix behaviour for non existing GPIOs

devm_gpiod_get_index() doesn't return NULL but -ENOENT when the
requested GPIO doesn't exist,  leading to the following messages:

[    2.742468] gpiod_direction_input: invalid GPIO (errorpointer)
[    2.748147] can't set direction for gpio #2: -2
[    2.753081] gpiod_direction_input: invalid GPIO (errorpointer)
[    2.758724] can't set direction for gpio #3: -2
[    2.763666] gpiod_direction_output: invalid GPIO (errorpointer)
[    2.769394] can't set direction for gpio #4: -2
[    2.774341] gpiod_direction_input: invalid GPIO (errorpointer)
[    2.779981] can't set direction for gpio #5: -2
[    2.784545] ff000a20.serial: ttyCPM1 at MMIO 0xfff00a20 (irq = 39, base_baud = 8250000) is a CPM UART

Use devm_gpiod_get_index_optional() instead.

At the same time, handle the error case and properly exit
with an error.

Fixes: 97cbaf2c829b ("tty: serial: cpm_uart: Convert to use GPIO descriptors")
Cc: stable@vger.kernel.org
Cc: Linus Walleij <redacted>
Signed-off-by: Christophe Leroy <redacted>
---
v2: Using devm_gpiod_get_index_optional() and exiting if error
---
 drivers/tty/serial/cpm_uart/cpm_uart_core.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index a04f74d2e854..4df47d02b34b 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c

@@ -1215,7 +1215,12 @@ static int cpm_uart_init_port(struct device_node *np,
 
 		pinfo->gpios[i] = NULL;
 
-		gpiod = devm_gpiod_get_index(dev, NULL, i, GPIOD_ASIS);
+		gpiod = devm_gpiod_get_index_optional(dev, NULL, i, GPIOD_ASIS);
+
+		if (IS_ERR(gpiod)) {
+			ret = PTR_ERR(gpiod);
+			goto out_irq;
+		}
 
 		if (gpiod) {
 			if (i == GPIO_RTS || i == GPIO_DTR)

@@ -1237,6 +1242,8 @@ static int cpm_uart_init_port(struct device_node *np,
 
 	return cpm_uart_request_port(&pinfo->port);
 
+out_irq:
+	irq_dispose_mapping(pinfo->port.irq);
 out_pram:
 	cpm_uart_unmap_pram(pinfo, pram);
 out_mem:

-- 
2.25.0

On Fri, Jun 12, 2020 at 8:26 PM Christophe Leroy
[off-list ref] wrote:

devm_gpiod_get_index() doesn't return NULL but -ENOENT when the
requested GPIO doesn't exist,  leading to the following messages:

[    2.742468] gpiod_direction_input: invalid GPIO (errorpointer)
[    2.748147] can't set direction for gpio #2: -2
[    2.753081] gpiod_direction_input: invalid GPIO (errorpointer)
[    2.758724] can't set direction for gpio #3: -2
[    2.763666] gpiod_direction_output: invalid GPIO (errorpointer)
[    2.769394] can't set direction for gpio #4: -2
[    2.774341] gpiod_direction_input: invalid GPIO (errorpointer)
[    2.779981] can't set direction for gpio #5: -2
[    2.784545] ff000a20.serial: ttyCPM1 at MMIO 0xfff00a20 (irq = 39, base_baud = 8250000) is a CPM UART

Use devm_gpiod_get_index_optional() instead.

At the same time, handle the error case and properly exit
with an error.

Fixes: 97cbaf2c829b ("tty: serial: cpm_uart: Convert to use GPIO descriptors")
Cc: stable@vger.kernel.org
Cc: Linus Walleij <redacted>
Signed-off-by: Christophe Leroy <redacted>
---
v2: Using devm_gpiod_get_index_optional() and exiting if error

Excellent!
Reviewed-by: Linus Walleij <redacted>

Yours,
Linus Walleij