[PATCH v2 1/1] ppc/crash: Skip spinlocks during crash

Subsystems: linux for powerpc (32-bit and 64-bit), locking primitives, the rest

STALE2321d

4 messages, 3 authors, 2020-04-02 · open the first message on its own page

[PATCH v2 1/1] ppc/crash: Skip spinlocks during crash

From: Leonardo Bras <hidden>
Date: 2020-03-26 23:27:00

During a crash, there is chance that the cpus that handle the NMI IPI
are holding a spin_lock. If this spin_lock is needed by crashing_cpu it
will cause a deadlock. (rtas_lock and printk logbuf_log as of today)

This is a problem if the system has kdump set up, given if it crashes
for any reason kdump may not be saved for crash analysis.

Skip spinlocks after NMI IPI is sent to all other cpus.

Signed-off-by: Leonardo Bras <redacted>
---
 arch/powerpc/include/asm/spinlock.h | 6 ++++++
 arch/powerpc/kexec/crash.c          | 4 ++++
 2 files changed, 10 insertions(+)
diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h
index 860228e917dc..a6381d110795 100644
--- a/arch/powerpc/include/asm/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -111,6 +111,8 @@ static inline void splpar_spin_yield(arch_spinlock_t *lock) {};
 static inline void splpar_rw_yield(arch_rwlock_t *lock) {};
 #endif
 
+extern bool crash_skip_spinlock __read_mostly;
+
 static inline bool is_shared_processor(void)
 {
 #ifdef CONFIG_PPC_SPLPAR
@@ -142,6 +144,8 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 		if (likely(__arch_spin_trylock(lock) == 0))
 			break;
 		do {
+			if (unlikely(crash_skip_spinlock))
+				return;
 			HMT_low();
 			if (is_shared_processor())
 				splpar_spin_yield(lock);
@@ -161,6 +165,8 @@ void arch_spin_lock_flags(arch_spinlock_t *lock, unsigned long flags)
 		local_save_flags(flags_dis);
 		local_irq_restore(flags);
 		do {
+			if (unlikely(crash_skip_spinlock))
+				return;
 			HMT_low();
 			if (is_shared_processor())
 				splpar_spin_yield(lock);
diff --git a/arch/powerpc/kexec/crash.c b/arch/powerpc/kexec/crash.c
index d488311efab1..ae081f0f2472 100644
--- a/arch/powerpc/kexec/crash.c
+++ b/arch/powerpc/kexec/crash.c
@@ -66,6 +66,9 @@ static int handle_fault(struct pt_regs *regs)
 
 #ifdef CONFIG_SMP
 
+bool crash_skip_spinlock;
+EXPORT_SYMBOL(crash_skip_spinlock);
+
 static atomic_t cpus_in_crash;
 void crash_ipi_callback(struct pt_regs *regs)
 {
@@ -129,6 +132,7 @@ static void crash_kexec_prepare_cpus(int cpu)
 	/* Would it be better to replace the trap vector here? */
 
 	if (atomic_read(&cpus_in_crash) >= ncpus) {
+		crash_skip_spinlock = true;
 		printk(KERN_EMERG "IPI complete\n");
 		return;
 	}
-- 
2.24.1

Re: [PATCH v2 1/1] ppc/crash: Skip spinlocks during crash

From: Michael Ellerman <mpe@ellerman.id.au>
Date: 2020-03-27 03:50:15

Hi Leonardo,

Leonardo Bras [off-list ref] writes:
During a crash, there is chance that the cpus that handle the NMI IPI
are holding a spin_lock. If this spin_lock is needed by crashing_cpu it
will cause a deadlock. (rtas_lock and printk logbuf_log as of today)
Please give us more detail on how those locks are causing you trouble, a
stack trace would be good if you have it.
This is a problem if the system has kdump set up, given if it crashes
for any reason kdump may not be saved for crash analysis.

Skip spinlocks after NMI IPI is sent to all other cpus.
We don't want to add overhead to all spinlocks for the life of the
system, just to handle this one case.

There's already a flag that is set when the system is crashing,
"oops_in_progress", maybe we need to use that somewhere to skip a lock
or do an early return.

cheers
quoted hunk
diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h
index 860228e917dc..a6381d110795 100644
--- a/arch/powerpc/include/asm/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -111,6 +111,8 @@ static inline void splpar_spin_yield(arch_spinlock_t *lock) {};
 static inline void splpar_rw_yield(arch_rwlock_t *lock) {};
 #endif
 
+extern bool crash_skip_spinlock __read_mostly;
+
 static inline bool is_shared_processor(void)
 {
 #ifdef CONFIG_PPC_SPLPAR
@@ -142,6 +144,8 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 		if (likely(__arch_spin_trylock(lock) == 0))
 			break;
 		do {
+			if (unlikely(crash_skip_spinlock))
+				return;
 			HMT_low();
 			if (is_shared_processor())
 				splpar_spin_yield(lock);
@@ -161,6 +165,8 @@ void arch_spin_lock_flags(arch_spinlock_t *lock, unsigned long flags)
 		local_save_flags(flags_dis);
 		local_irq_restore(flags);
 		do {
+			if (unlikely(crash_skip_spinlock))
+				return;
 			HMT_low();
 			if (is_shared_processor())
 				splpar_spin_yield(lock);
diff --git a/arch/powerpc/kexec/crash.c b/arch/powerpc/kexec/crash.c
index d488311efab1..ae081f0f2472 100644
--- a/arch/powerpc/kexec/crash.c
+++ b/arch/powerpc/kexec/crash.c
@@ -66,6 +66,9 @@ static int handle_fault(struct pt_regs *regs)
 
 #ifdef CONFIG_SMP
 
+bool crash_skip_spinlock;
+EXPORT_SYMBOL(crash_skip_spinlock);
+
 static atomic_t cpus_in_crash;
 void crash_ipi_callback(struct pt_regs *regs)
 {
@@ -129,6 +132,7 @@ static void crash_kexec_prepare_cpus(int cpu)
 	/* Would it be better to replace the trap vector here? */
 
 	if (atomic_read(&cpus_in_crash) >= ncpus) {
+		crash_skip_spinlock = true;
 		printk(KERN_EMERG "IPI complete\n");
 		return;
 	}
-- 
2.24.1

Re: [PATCH v2 1/1] ppc/crash: Skip spinlocks during crash

From: Leonardo Bras <hidden>
Date: 2020-03-27 18:16:07

Hello Michael,

On Fri, 2020-03-27 at 14:50 +1100, Michael Ellerman wrote:
Hi Leonardo,

Leonardo Bras [off-list ref] writes:
quoted
During a crash, there is chance that the cpus that handle the NMI IPI
are holding a spin_lock. If this spin_lock is needed by crashing_cpu it
will cause a deadlock. (rtas_lock and printk logbuf_log as of today)
Please give us more detail on how those locks are causing you trouble, a
stack trace would be good if you have it.
Sure, I have hit it in printf and rtas_call, as said before. 

After crash_send_ipi(), it's tested how many cpus_in_crash are there,
and once they hit the total value, it's printed "IPI complete". This
printk call itself already got stuck in spin_lock, for example.

Here are the stack traces:

#0  arch_spin_lock 
#1  do_raw_spin_lock 
#2  __raw_spin_lock 
#3  _raw_spin_lock 
#4  vprintk_emit 
#5  vprintk_func
#7  crash_kexec_prepare_cpus 
#8  default_machine_crash_shutdown
#9  machine_crash_shutdown 
#10 __crash_kexec
#11 crash_kexec
#12 oops_end

#0 arch_spin_lock
#1  lock_rtas () 
#2  rtas_call (token=8204, nargs=1, nret=1, outputs=0x0)
#3  ics_rtas_mask_real_irq (hw_irq=4100) 
#4  machine_kexec_mask_interrupts
#5  default_machine_crash_shutdown
#6  machine_crash_shutdown 
#7  __crash_kexec
#8  crash_kexec
#9  oops_end
quoted
This is a problem if the system has kdump set up, given if it crashes
for any reason kdump may not be saved for crash analysis.

Skip spinlocks after NMI IPI is sent to all other cpus.
We don't want to add overhead to all spinlocks for the life of the
system, just to handle this one case.
I understand. 
Other than this patch, I would propose doing something uglier, like
forcing the said locks to unlocked state when cpus_in_crash hits it's
maximum value, before printing "IPI complete".
Creating similar functions that don't lock, just for this case, looks
like overkill to me.

Do you have any other suggestion?
There's already a flag that is set when the system is crashing,
"oops_in_progress", maybe we need to use that somewhere to skip a lock
or do an early return.
I think that would not work, because oops_in_progress should be 0 here:
oops_end() calls bust_spinlocks(0) before calling crash_kexec(), and
bust_spinlocks(0) will decrement oops_in_progress.
(just verified, it's 0 before printing "IPI complete").

Thank you the feedback, :)

Best regards,
Leonardo

Re: [PATCH v2 1/1] ppc/crash: Skip spinlocks during crash

From: kbuild test robot <hidden>
Date: 2020-04-02 04:50:33

Hi Leonardo,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on tip/locking/core]
[also build test ERROR on powerpc/next paulus-powerpc/kvm-ppc-next v5.6 next-20200401]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Leonardo-Bras/ppc-crash-Skip-spinlocks-during-crash/20200327-105958
base:   https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git 8bf6c677ddb9c922423ea3bf494fe7c508bfbb8c
config: powerpc-randconfig-a001-20200401 (attached as .config)
compiler: powerpc-linux-gcc (GCC) 9.3.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        GCC_VERSION=9.3.0 make.cross ARCH=powerpc 

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <redacted>

All errors (new ones prefixed by >>):

   powerpc-linux-ld: arch/powerpc/kernel/traps.o: in function `arch_spin_lock':
quoted
arch/powerpc/include/asm/spinlock.h:147: undefined reference to `crash_skip_spinlock'
powerpc-linux-ld: arch/powerpc/include/asm/spinlock.h:147: undefined reference to `crash_skip_spinlock'
   powerpc-linux-ld: arch/powerpc/kernel/rtas.o: in function `arch_spin_lock':
quoted
arch/powerpc/include/asm/spinlock.h:147: undefined reference to `crash_skip_spinlock'
powerpc-linux-ld: arch/powerpc/include/asm/spinlock.h:147: undefined reference to `crash_skip_spinlock'
   powerpc-linux-ld: kernel/locking/lockdep.o: in function `arch_spin_lock':
quoted
arch/powerpc/include/asm/spinlock.h:147: undefined reference to `crash_skip_spinlock'
   powerpc-linux-ld: kernel/locking/lockdep.o:arch/powerpc/include/asm/spinlock.h:147: more undefined references to `crash_skip_spinlock' follow
quoted
pahole: .tmp_vmlinux.btf: No such file or directory
   powerpc-linux-objdump: '.tmp_vmlinux.btf': No such file
   powerpc-linux-objdump: '.tmp_vmlinux.btf': No such file
   powerpc-linux-objcopy: '.tmp_vmlinux.btf': No such file
   powerpc-linux-objcopy: --change-section-vma .BTF=0x0000000000000000 never used
   powerpc-linux-objcopy: --change-section-lma .BTF=0x0000000000000000 never used
   powerpc-linux-objcopy: '.btf.vmlinux.bin': No such file
   Failed to generate BTF for vmlinux
   Try to disable CONFIG_DEBUG_INFO_BTF

vim +147 arch/powerpc/include/asm/spinlock.h

   140	
   141	static inline void arch_spin_lock(arch_spinlock_t *lock)
   142	{
   143		while (1) {
   144			if (likely(__arch_spin_trylock(lock) == 0))
   145				break;
   146			do {
 > 147				if (unlikely(crash_skip_spinlock))
   148					return;
   149				HMT_low();
   150				if (is_shared_processor())
   151					splpar_spin_yield(lock);
   152			} while (unlikely(lock->slock != 0));
   153			HMT_medium();
   154		}
   155	}
   156	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help