[PATCH] powerpc/6xx: Fix power_save_ppc32_restore() with CONFIG_VMAP_STACK

Subsystems: linux for powerpc (32-bit and 64-bit), the rest

STALE2368d LANDED: 1 (0M)

1 review trailer; landed in mainline as 477f3488a94e on 2020-02-18.

2 messages, 2 authors, 2020-02-19 · open the first message on its own page

[PATCH] powerpc/6xx: Fix power_save_ppc32_restore() with CONFIG_VMAP_STACK

From: Christophe Leroy <hidden>
Date: 2020-02-14 06:53:03

power_save_ppc32_restore() is called during exception entry, before
re-enabling the MMU. It substracts KERNELBASE from the address
of nap_save_msscr0 to access it.

With CONFIG_VMAP_STACK enabled, data MMU translation has already been
re-enabled, so power_save_ppc32_restore() has to access
nap_save_msscr0 by its virtual address.

Reported-by: Larry Finger <redacted>
Signed-off-by: Christophe Leroy <redacted>
Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK")
Tested-by: Larry Finger <redacted>
---
 arch/powerpc/kernel/idle_6xx.S | 8 ++++++++
 1 file changed, 8 insertions(+)
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 0ffdd18b9f26..433d97bea1f3 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -166,7 +166,11 @@ BEGIN_FTR_SECTION
 	mfspr	r9,SPRN_HID0
 	andis.	r9,r9,HID0_NAP@h
 	beq	1f
+#ifdef CONFIG_VMAP_STACK
+	addis	r9, r11, nap_save_msscr0@ha
+#else
 	addis	r9,r11,(nap_save_msscr0-KERNELBASE)@ha
+#endif
 	lwz	r9,nap_save_msscr0@l(r9)
 	mtspr	SPRN_MSSCR0, r9
 	sync
@@ -174,7 +178,11 @@ BEGIN_FTR_SECTION
 1:
 END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
 BEGIN_FTR_SECTION
+#ifdef CONFIG_VMAP_STACK
+	addis	r9, r11, nap_save_hid1@ha
+#else
 	addis	r9,r11,(nap_save_hid1-KERNELBASE)@ha
+#endif
 	lwz	r9,nap_save_hid1@l(r9)
 	mtspr	SPRN_HID1, r9
 END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
-- 
2.25.0

Re: [PATCH] powerpc/6xx: Fix power_save_ppc32_restore() with CONFIG_VMAP_STACK

From: Michael Ellerman <hidden>
Date: 2020-02-19 12:40:07

On Fri, 2020-02-14 at 06:53:00 UTC, Christophe Leroy wrote:
power_save_ppc32_restore() is called during exception entry, before
re-enabling the MMU. It substracts KERNELBASE from the address
of nap_save_msscr0 to access it.

With CONFIG_VMAP_STACK enabled, data MMU translation has already been
re-enabled, so power_save_ppc32_restore() has to access
nap_save_msscr0 by its virtual address.

Reported-by: Larry Finger <redacted>
Signed-off-by: Christophe Leroy <redacted>
Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK")
Tested-by: Larry Finger <redacted>
Applied to powerpc fixes, thanks.

https://git.kernel.org/powerpc/c/477f3488a94e35380c82a7498d46f10fa5f3edd2

cheers
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help