[PATCH] powerpc/64: allow compiler to cache 'current'

Subsystems: linux for powerpc (32-bit and 64-bit), the rest

STALE2536d LANDED

Landed in mainline as e354d7dc81d0 on 2019-08-20.

2 messages, 2 authors, 2019-08-22 · open the first message on its own page

[PATCH] powerpc/64: allow compiler to cache 'current'

From: Nicholas Piggin <npiggin@gmail.com>
Date: 2019-06-12 14:11:59

current may be cached by the compiler, so remove the volatile asm
restriction. This results in better generated code, as well as being
smaller and fewer dependent loads, it can avoid store-hit-load flushes
like this one that shows up in irq_exit():

    preempt_count_sub(HARDIRQ_OFFSET);
    if (!in_interrupt() && ...)

Which ends up as:

    ((struct thread_info *)current)->preempt_count -= HARDIRQ_OFFSET;
    if (((struct thread_info *)current)->preempt_count ...

Evaluating current twice presently means it has to be loaded twice, and
here gcc happens to pick a different register each time, then
preempt_count is accessed via that base register:

    1058:       ld      r10,2392(r13)     <-- current
    105c:       lwz     r9,0(r10)         <-- preempt_count
    1060:       addis   r9,r9,-1
    1064:       stw     r9,0(r10)         <-- preempt_count
    1068:       ld      r9,2392(r13)      <-- current
    106c:       lwz     r9,0(r9)          <-- preempt_count
    1070:       rlwinm. r9,r9,0,11,23
    1074:       bne     1090 <irq_exit+0x60>

This can frustrate store-hit-load detection heuristics and cause
flushes. Allowing the compiler to cache current in a reigster with this
patch results in the same base register being used for all accesses,
which is more likely to be detected as an alias:

    1058:       ld      r31,2392(r13)
    ...
    1070:       lwz     r9,0(r31)
    1074:       addis   r9,r9,-1
    1078:       stw     r9,0(r31)
    107c:       lwz     r9,0(r31)
    1080:       rlwinm. r9,r9,0,11,23
    1084:       bne     10a0 <irq_exit+0x60>

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/include/asm/current.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/current.h b/arch/powerpc/include/asm/current.h
index 297827b76169..bbfb94800415 100644
--- a/arch/powerpc/include/asm/current.h
+++ b/arch/powerpc/include/asm/current.h
@@ -16,7 +16,8 @@ static inline struct task_struct *get_current(void)
 {
 	struct task_struct *task;
 
-	__asm__ __volatile__("ld %0,%1(13)"
+	/* get_current can be cached by the compiler, so no volatile */
+	asm ("ld %0,%1(13)"
 	: "=r" (task)
 	: "i" (offsetof(struct paca_struct, __current)));
 
-- 
2.20.1

Re: [PATCH] powerpc/64: allow compiler to cache 'current'

From: Michael Ellerman <hidden>
Date: 2019-08-22 13:14:30

On Wed, 2019-06-12 at 14:03:17 UTC, Nicholas Piggin wrote:
current may be cached by the compiler, so remove the volatile asm
restriction. This results in better generated code, as well as being
smaller and fewer dependent loads, it can avoid store-hit-load flushes
like this one that shows up in irq_exit():

    preempt_count_sub(HARDIRQ_OFFSET);
    if (!in_interrupt() && ...)

Which ends up as:

    ((struct thread_info *)current)->preempt_count -= HARDIRQ_OFFSET;
    if (((struct thread_info *)current)->preempt_count ...

Evaluating current twice presently means it has to be loaded twice, and
here gcc happens to pick a different register each time, then
preempt_count is accessed via that base register:

    1058:       ld      r10,2392(r13)     <-- current
    105c:       lwz     r9,0(r10)         <-- preempt_count
    1060:       addis   r9,r9,-1
    1064:       stw     r9,0(r10)         <-- preempt_count
    1068:       ld      r9,2392(r13)      <-- current
    106c:       lwz     r9,0(r9)          <-- preempt_count
    1070:       rlwinm. r9,r9,0,11,23
    1074:       bne     1090 <irq_exit+0x60>

This can frustrate store-hit-load detection heuristics and cause
flushes. Allowing the compiler to cache current in a reigster with this
patch results in the same base register being used for all accesses,
which is more likely to be detected as an alias:

    1058:       ld      r31,2392(r13)
    ...
    1070:       lwz     r9,0(r31)
    1074:       addis   r9,r9,-1
    1078:       stw     r9,0(r31)
    107c:       lwz     r9,0(r31)
    1080:       rlwinm. r9,r9,0,11,23
    1084:       bne     10a0 <irq_exit+0x60>

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/e354d7dc81d0e81bea33165f381aff1eda45f5d9

cheers
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help