[PATCH net 0/3] ibmvnic: Fixes for device reset handling

This series contains three unrelated fixes to issues seen during
device resets. The first patch fixes an error when the driver requests
to deactivate the link of an uninitialized device, resulting in a 
failure to reset. Next, a patch to fix multicast transmission 
failures seen after a driver reset. The final patch fixes mishandling
of memory allocation failures during device initialization, which
caused a kernel oops.

Thomas Falcon (3):
  ibmvnic: Do not close unopened driver during reset
  ibmvnic: Refresh device multicast list after reset
  ibmvnic: Fix unchecked return codes of memory allocations

 drivers/net/ethernet/ibm/ibmvnic.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

-- 
1.8.3.1

The return values for these memory allocations are unchecked,
which may cause an oops if the driver does not handle them after
a failure. Fix by checking the function's return code.

Signed-off-by: Thomas Falcon <redacted>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 9e9f409..3da6800 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c

@@ -428,9 +428,10 @@ static int reset_rx_pools(struct ibmvnic_adapter *adapter)
 		if (rx_pool->buff_size != be64_to_cpu(size_array[i])) {
 			free_long_term_buff(adapter, &rx_pool->long_term_buff);
 			rx_pool->buff_size = be64_to_cpu(size_array[i]);
-			alloc_long_term_buff(adapter, &rx_pool->long_term_buff,
-					     rx_pool->size *
-					     rx_pool->buff_size);
+			rc = alloc_long_term_buff(adapter,
+						  &rx_pool->long_term_buff,
+						  rx_pool->size *
+						  rx_pool->buff_size);
 		} else {
 			rc = reset_long_term_buff(adapter,
 						  &rx_pool->long_term_buff);

@@ -696,9 +697,9 @@ static int init_tx_pools(struct net_device *netdev)
 			return rc;
 		}
 
-		init_one_tx_pool(netdev, &adapter->tso_pool[i],
-				 IBMVNIC_TSO_BUFS,
-				 IBMVNIC_TSO_BUF_SZ);
+		rc = init_one_tx_pool(netdev, &adapter->tso_pool[i],
+				      IBMVNIC_TSO_BUFS,
+				      IBMVNIC_TSO_BUF_SZ);
 		if (rc) {
 			release_tx_pools(adapter);
 			return rc;

-- 
1.8.3.1

It was observed that multicast packets were no longer received after
a device reset.  The fix is to resend the current multicast list to
the backing device after recovery.

Signed-off-by: Thomas Falcon <redacted>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index bc2a912..9e9f409 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c

@@ -1845,6 +1845,9 @@ static int do_reset(struct ibmvnic_adapter *adapter,
 		return 0;
 	}
 
+	/* refresh device's multicast list */
+	ibmvnic_set_multi(netdev);
+
 	/* kick napi */
 	for (i = 0; i < adapter->req_rx_queues; i++)
 		napi_schedule(&adapter->napi[i]);

-- 
1.8.3.1

Check driver state before halting it during a reset. If the driver is
not running, do nothing. Otherwise, a request to deactivate a down link
can cause an error and the reset will fail.

Signed-off-by: Thomas Falcon <redacted>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 3da392b..bc2a912 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c

@@ -1745,7 +1745,8 @@ static int do_reset(struct ibmvnic_adapter *adapter,
 
 	ibmvnic_cleanup(netdev);
 
-	if (adapter->reset_reason != VNIC_RESET_MOBILITY &&
+	if (reset_state == VNIC_OPEN &&
+	    adapter->reset_reason != VNIC_RESET_MOBILITY &&
 	    adapter->reset_reason != VNIC_RESET_FAILOVER) {
 		rc = __ibmvnic_close(netdev);
 		if (rc)

-- 
1.8.3.1

From: Thomas Falcon <redacted>
Date: Fri,  7 Jun 2019 16:03:52 -0500

This series contains three unrelated fixes to issues seen during
device resets. The first patch fixes an error when the driver requests
to deactivate the link of an uninitialized device, resulting in a 
failure to reset. Next, a patch to fix multicast transmission 
failures seen after a driver reset. The final patch fixes mishandling
of memory allocation failures during device initialization, which
caused a kernel oops.

Series applied, thanks.