[PATCH] powerpc/powernv: Move opal_power_control_init() call in opal_init().

From: Mahesh Salgaonkar <redacted>

opal_power_control_init() depends on opal message notifier to be
initialized, which is done in opal_init()->opal_message_init(). But both
these initialization are called through machine initcalls and it all
depends on in which order they being called. So far these are called in
correct order (may be we got lucky) and never saw any issue. But it is
clearer to control initialization order explicitly by moving
opal_power_control_init() into opal_init().

Signed-off-by: Mahesh Salgaonkar <redacted>
---
 arch/powerpc/include/asm/opal.h             |    1 +
 arch/powerpc/platforms/powernv/opal-power.c |    3 +--
 arch/powerpc/platforms/powernv/opal.c       |    3 +++
 3 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index ff3866473afe..a55b01c90bb1 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h

@@ -347,6 +347,7 @@ extern int opal_async_comp_init(void);
 extern int opal_sensor_init(void);
 extern int opal_hmi_handler_init(void);
 extern int opal_event_init(void);
+int opal_power_control_init(void);
 
 extern int opal_machine_check(struct pt_regs *regs);
 extern bool opal_mce_check_early_recovery(struct pt_regs *regs);

diff --git a/arch/powerpc/platforms/powernv/opal-power.c b/arch/powerpc/platforms/powernv/opal-power.c
index 58dc3308237f..89ab1da57657 100644
--- a/arch/powerpc/platforms/powernv/opal-power.c
+++ b/arch/powerpc/platforms/powernv/opal-power.c

@@ -138,7 +138,7 @@ static struct notifier_block opal_power_control_nb = {
 	.priority	= 0,
 };
 
-static int __init opal_power_control_init(void)
+int __init opal_power_control_init(void)
 {
 	int ret, supported = 0;
 	struct device_node *np;

@@ -176,4 +176,3 @@ static int __init opal_power_control_init(void)
 
 	return 0;
 }
-machine_subsys_initcall(powernv, opal_power_control_init);

diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index beed86f4224b..f6dfc0534969 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c

@@ -960,6 +960,9 @@ static int __init opal_init(void)
 	/* Initialise OPAL sensor groups */
 	opal_sensor_groups_init();
 
+	/* Initialise OPAL Power control interface */
+	opal_power_control_init();
+
 	return 0;
 }
 machine_subsys_initcall(powernv, opal_init);

On Thu, 2018-12-13 at 05:47:31 UTC, Mahesh J Salgaonkar wrote:

From: Mahesh Salgaonkar <redacted>

opal_power_control_init() depends on opal message notifier to be
initialized, which is done in opal_init()->opal_message_init(). But both
these initialization are called through machine initcalls and it all
depends on in which order they being called. So far these are called in
correct order (may be we got lucky) and never saw any issue. But it is
clearer to control initialization order explicitly by moving
opal_power_control_init() into opal_init().

Signed-off-by: Mahesh Salgaonkar <redacted>

Applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/08fb726df13778a54592aaa1deea6a

cheers