Re: [PATCH] sched/topology: Use Identity node only if required

7 messages, 2 authors, 2018-08-31 · open the first message on its own page

Re: [PATCH] sched/topology: Use Identity node only if required

From: Srikar Dronamraju <hidden>
Date: 2018-08-10 16:45:46 

* Peter Zijlstra [off-list ref] [2018-08-08 09:58:41]:

On Wed, Aug 08, 2018 at 12:39:31PM +0530, Srikar Dronamraju wrote:
quoted
With Commit 051f3ca02e46 ("sched/topology: Introduce NUMA identity node
sched domain") scheduler introduces an extra numa level. However that
leads to

 - numa topology on 2 node systems no more marked as NUMA_DIRECT.  After
   this commit, it gets reported as NUMA_BACKPLANE. This is because
   sched_domains_numa_level now equals 2 on 2 node systems.

 - Extra numa sched domain that gets added and degenerated on most
   machines.  The Identity node is only needed on very few systems.
   Also all non-numa systems will end up populating
   sched_domains_numa_distance and sched_domains_numa_masks tables.

 - On shared lpars like powerpc, this extra sched domain creation can
   lead to repeated rcu stalls, sometimes even causing unresponsive
   systems on boot. On such stalls, it was noticed that
   init_sched_groups_capacity() (sg != sd->groups is always true).
The idea was that if the topology level is redundant (as it often is);
then the degenerate code would take it out.

Why is that not working (right) and can we fix that instead?
Here is my analysis on another box showing same issue.
numactl o/p

available: 4 nodes (0-3)
node 0 cpus: 0 1 2 3 4 5 6 7 32 33 34 35 36 37 38 39 64 65 66 67 68 69 70 71 96 97 98 99 100 101 102 103 128 129 130 131 132 133 134 135 160 161 162 163 164 165 166 167 192 193 194 195 196 197 198 199 224 225 226 227 228 229 230 231 256 257 258 259 260 261 262 263 288 289 290 291 292 293 294 295
node 0 size: 536888 MB
node 0 free: 533582 MB
node 1 cpus: 24 25 26 27 28 29 30 31 56 57 58 59 60 61 62 63 88 89 90 91 92 93 94 95 120 121 122 123 124 125 126 127 152 153 154 155 156 157 158 159 184 185 186 187 188 189 190 191 216 217 218 219 220 221 222 223 248 249 250 251 252 253 254 255 280 281 282 283 284 285 286 287
node 1 size: 502286 MB
node 1 free: 501283 MB
node 2 cpus: 16 17 18 19 20 21 22 23 48 49 50 51 52 53 54 55 80 81 82 83 84 85 86 87 112 113 114 115 116 117 118 119 144 145 146 147 148 149 150 151 176 177 178 179 180 181 182 183 208 209 210 211 212 213 214 215 240 241 242 243 244 245 246 247 272 273 274 275 276 277 278 279
node 2 size: 503054 MB
node 2 free: 502854 MB
node 3 cpus: 8 9 10 11 12 13 14 15 40 41 42 43 44 45 46 47 72 73 74 75 76 77 78 79 104 105 106 107 108 109 110 111 136 137 138 139 140 141 142 143 168 169 170 171 172 173 174 175 200 201 202 203 204 205 206 207 232 233 234 235 236 237 238 239 264 265 266 267 268 269 270 271 296 297 298 299 300 301 302 303
node 3 size: 503310 MB
node 3 free: 498465 MB
node distances:
node   0   1   2   3
  0:  10  40  40  40
  1:  40  10  40  40
  2:  40  40  10  40
  3:  40  40  40  10

Extracting the contents of dmesg using sched_debug kernel parameter

CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
....
....
CPU302 attaching NULL sched-domain.
CPU303 attaching NULL sched-domain.
BUG: arch topology borken
     the DIE domain not a subset of the NODE domain
BUG: arch topology borken
     the DIE domain not a subset of the NODE domain
.....
.....
BUG: arch topology borken
     the DIE domain not a subset of the NODE domain
BUG: arch topology borken
     the DIE domain not a subset of the NODE domain
BUG: arch topology borken
     the DIE domain not a subset of the NODE domain

 CPU0 attaching sched-domain(s):
   domain-2: sdA, span=0-303 level=NODE
    groups: sg=sgL 0:{ span=0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-231,256-263,288-295 cap=81920 }, sgM 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }, sdN 16:{ span=16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=73728 }, sgO 24:{ span=24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=73728 }
CPU1  attaching sched-domain(s):
   domain-2: sdB, span=0-303 level=NODE
[  367.739387]     groups: sg=sgL 0:{ span=0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-231,256-263,288-295 cap=81920 }, sgM 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }, sdN 16:{ span=16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=73728 }, sgO 24:{ span=24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=73728 }


CPU8  attaching sched-domain(s):
   domain-2: sdC, span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 level=NODE
    groups: sgM 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }
    domain-3: sdD, span=0-303 level=NUMA
     groups: sgX 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }, sgY 16:{ span=16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=73728 }, sgZ 24:{ span=24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=73728 }
ERROR: groups don't span domain->span

CPU9  attaching sched-domain(s):
   domain-2: sdE span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 level=NODE
    groups: sgM 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }
    domain-3: sdF span=0-303 level=NUMA
     groups: sgP 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }, sgQ 16:{ span=16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=73728 }, sgR 24:{ span=24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=73728 }
ERROR: groups don't span domain->span


Trying to summarize further

+ Node sched domain groups are initialised with build_sched_groups (that
tried to share groups)
+ Numa sched domain groups are initialised with build_overlap_sched_groups

Cpu 0: sdA->groups  sgL  ->next= sgM ->next= sgN ->next= sgO
Cpu 1: sdB->groups  sgL  ->next= sgM ->next= sgN ->next= sgO

However
Cpu 8: sdC->groups -> sgM ->next= sgM  (NODE)
Cpu 8: sdD->groups  sgX  ->next= sgY ->next= sgZ (NUMA)
Cpu 9: sdE->groups -> sgM ->next= sgM  (NODE)
Cpu 1: sdB->groups  sgP  ->next= sgQ ->next= sg (NUMA)

In init_sched_group_capacity(), When we start with sdB->groups and reach sgM
but sgM->next happens to be sgM. However sdB->groups != sdM

With non-identity NUMA sched_domains, build_overlap_sched_groups creates new
groups per sched-domain, so the problem is masked.

i.e On a topology update, the sched_domain_numa_mask aren't getting updated.
causing very wierd sched domains. The Identity node sched domain further
complicates the problem.

One solution would be to expose sched_domain_numa_mask_set/clear so that the
archs can help build correct/proper sched_domains.

Re: [PATCH] sched/topology: Use Identity node only if required

From: Peter Zijlstra <peterz@infradead.org>
Date: 2018-08-29 08:44:07 

On Fri, Aug 10, 2018 at 09:45:33AM -0700, Srikar Dronamraju wrote:

available: 4 nodes (0-3)
node 0 cpus: 0 1 2 3 4 5 6 7 32 33 34 35 36 37 38 39 64 65 66 67 68 69 70 71 96 97 98 99 100 101 102 103 128 129 130 131 132 133 134 135 160 161 162 163 164 165 166 167 192 193 194 195 196 197 198 199 224 225 226 227 228 229 230 231 256 257 258 259 260 261 262 263 288 289 290 291 292 293 294 295
node 0 size: 536888 MB
node 0 free: 533582 MB
node 1 cpus: 24 25 26 27 28 29 30 31 56 57 58 59 60 61 62 63 88 89 90 91 92 93 94 95 120 121 122 123 124 125 126 127 152 153 154 155 156 157 158 159 184 185 186 187 188 189 190 191 216 217 218 219 220 221 222 223 248 249 250 251 252 253 254 255 280 281 282 283 284 285 286 287
node 1 size: 502286 MB
node 1 free: 501283 MB
node 2 cpus: 16 17 18 19 20 21 22 23 48 49 50 51 52 53 54 55 80 81 82 83 84 85 86 87 112 113 114 115 116 117 118 119 144 145 146 147 148 149 150 151 176 177 178 179 180 181 182 183 208 209 210 211 212 213 214 215 240 241 242 243 244 245 246 247 272 273 274 275 276 277 278 279
node 2 size: 503054 MB
node 2 free: 502854 MB
node 3 cpus: 8 9 10 11 12 13 14 15 40 41 42 43 44 45 46 47 72 73 74 75 76 77 78 79 104 105 106 107 108 109 110 111 136 137 138 139 140 141 142 143 168 169 170 171 172 173 174 175 200 201 202 203 204 205 206 207 232 233 234 235 236 237 238 239 264 265 266 267 268 269 270 271 296 297 298 299 300 301 302 303
node 3 size: 503310 MB
node 3 free: 498465 MB
node distances:
node   0   1   2   3
  0:  10  40  40  40
  1:  40  10  40  40
  2:  40  40  10  40
  3:  40  40  40  10

Extracting the contents of dmesg using sched_debug kernel parameter

CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
....
....
CPU302 attaching NULL sched-domain.
CPU303 attaching NULL sched-domain.
BUG: arch topology borken
     the DIE domain not a subset of the NODE domain
^^^^^ CLUE!!

but nowhere did you show what it thinks the DIE mask is.

 CPU0 attaching sched-domain(s):
   domain-2: sdA, span=0-303 level=NODE
    groups: sg=sgL 0:{ span=0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-231,256-263,288-295 cap=81920 }, sgM 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }, sdN 16:{ span=16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=73728 }, sgO 24:{ span=24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=73728 }
CPU1  attaching sched-domain(s):
   domain-2: sdB, span=0-303 level=NODE
[  367.739387]     groups: sg=sgL 0:{ span=0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-231,256-263,288-295 cap=81920 }, sgM 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }, sdN 16:{ span=16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=73728 }, sgO 24:{ span=24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=73728 }
You forgot to provide the rest of it... what's domain-[01] look like?

DIE(j) should be:

	cpu_cpu_mask(j) := cpumask_of_node(cpu_to_node(j))

and NODE(j) should be:

	\Union_k cpumask_of_node(k) ; where node_distance(j,k) <= node_distance(0,0)

which, _should_ reduce to:

	cpumask_of_node(j)

and thus DIE and NODE _should_ be the same here.

So what's going sideways?

Re: [PATCH] sched/topology: Use Identity node only if required

From: Peter Zijlstra <peterz@infradead.org>
Date: 2018-08-29 08:58:06 

On Wed, Aug 29, 2018 at 10:43:48AM +0200, Peter Zijlstra wrote:
DIE(j) should be:

	cpu_cpu_mask(j) := cpumask_of_node(cpu_to_node(j))
FWIW, I was expecting that to be topology_core_cpumask(), so I'm a
little confused myself just now.

and NODE(j) should be:

	\Union_k cpumask_of_node(k) ; where node_distance(j,k) <= node_distance(0,0)

which, _should_ reduce to:

	cpumask_of_node(j)

and thus DIE and NODE _should_ be the same here.

So what's going sideways?

Re: [PATCH] sched/topology: Use Identity node only if required

From: Srikar Dronamraju <hidden>
Date: 2018-08-31 10:23:01 

* Peter Zijlstra [off-list ref] [2018-08-29 10:43:48]:

On Fri, Aug 10, 2018 at 09:45:33AM -0700, Srikar Dronamraju wrote:
=20
quoted
....
CPU302 attaching NULL sched-domain.
CPU303 attaching NULL sched-domain.
BUG: arch topology borken
     the DIE domain not a subset of the NODE domain
=20
^^^^^ CLUE!!
=20
but nowhere did you show what it thinks the DIE mask is.
=20
quoted
 CPU0 attaching sched-domain(s):
   domain-2: sdA, span=3D0-303 level=3DNODE
    groups: sg=3DsgL 0:{ span=3D0-7,32-39,64-71,96-103,128-135,160-167,=
192-199,224-231,256-263,288-295 cap=3D81920 }, sgM 8:{ span=3D8-15,40-47,72=
-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=3D81920 }, =
sdN 16:{ span=3D16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,2=
72-279 cap=3D73728 }, sgO 24:{ span=3D24-31,56-63,88-95,120-127,152-159,184=
-191,216-223,248-255,280-287 cap=3D73728 }
quoted
CPU1  attaching sched-domain(s):
   domain-2: sdB, span=3D0-303 level=3DNODE
[  367.739387]     groups: sg=3DsgL 0:{ span=3D0-7,32-39,64-71,96-103,1=
28-135,160-167,192-199,224-231,256-263,288-295 cap=3D81920 }, sgM 8:{ span=
=3D8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303=
 cap=3D81920 }, sdN 16:{ span=3D16-23,48-55,80-87,112-119,144-151,176-183,2=
08-215,240-247,272-279 cap=3D73728 }, sgO 24:{ span=3D24-31,56-63,88-95,120=
-127,152-159,184-191,216-223,248-255,280-287 cap=3D73728 }
=20
You forgot to provide the rest of it... what's domain-[01] look like?
At boot: Before topology update.

For  CPU 0=20
domain-0: span=3D0-7 level=3DSMT
 groups: 0:{ span=3D0 }, 1:{ span=3D1 }, 2:{ span=3D2 }, 3:{ span=3D3 }, 4:=
{ span=3D4 }, 5:{ span=3D5 }, 6:{ span=3D6 }, 7:{ span=3D7 }
 domain-1: span=3D0-303 level=3DDIE
  groups: 0:{ span=3D0-7 cap=3D8192 }, 8:{ span=3D8-15 cap=3D8192 }, 16:{ s=
pan=3D16-23 cap=3D8192 }, 24:{ span=3D24-31 cap=3D8192 }, 32:{ span=3D32-39=
 cap=3D8192 }, 40:{ span=3D40-47 cap=3D8192 }, 48:{ span=3D48-55 cap=3D8192=
 }, 56:{ span=3D56-63 cap=3D8192 }, 64:{ span=3D64-71 cap=3D8192 }, 72:{ sp=
an=3D72-79 cap=3D8192 }, 80:{ span=3D80-87 cap=3D8192 }, 88:{ span=3D88-95 =
cap=3D8192 }, 96:{ span=3D96-103 cap=3D8192 }, 104:{ span=3D104-111 cap=3D8=
192 }, 112:{ span=3D112-119 cap=3D8192 }, 120:{ span=3D120-127 cap=3D8192 }=
, 128:{ span=3D128-135 cap=3D8192 }, 136:{ span=3D136-143 cap=3D8192 }, 144=
:{ span=3D144-151 cap=3D8192 }, 152:{ span=3D152-159 cap=3D8192 }, 160:{ sp=
an=3D160-167 cap=3D8192 }, 168:{ span=3D168-175 cap=3D8192 }, 176:{ span=3D=
176-183 cap=3D8192 }, 184:{ span=3D184-191 cap=3D8192 }, 192:{ span=3D192-1=
99 cap=3D8192 }, 200:{ span=3D200-207 cap=3D8192 }, 208:{ span=3D208-215 ca=
p=3D8192 }, 216:{ span=3D216-223 cap=3D8192 }, 224:{ span=3D224-231 cap=3D8=
192 }, 232:{ span=3D232-239 cap=3D8192 }, 240:{ span=3D240-247 cap=3D8192 }=
, 248:{ span=3D248-255 cap=3D8192 }, 256:{ span=3D256-263 cap=3D8192 }, 264=
:{ span=3D264-271 cap=3D8192 }, 272:{ span=3D272-279 cap=3D8192 }, 280:{ sp=
an=3D280-287 cap=3D8192 }, 288:{ span=3D288-295 cap=3D8192 }, 296:{ span=3D=
296-303 cap=3D8192 }

For  CPU 1=20
domain-0: span=3D0-7 level=3DSMT
 groups: 1:{ span=3D1 }, 2:{ span=3D2 }, 3:{ span=3D3 }, 4:{ span=3D4 }, 5:=
{ span=3D5 }, 6:{ span=3D6 }, 7:{ span=3D7 }, 0:{ span=3D0 }
 domain-1: span=3D0-303 level=3DDIE
  groups: 0:{ span=3D0-7 cap=3D8192 }, 8:{ span=3D8-15 cap=3D8192 }, 16:{ s=
pan=3D16-23 cap=3D8192 }, 24:{ span=3D24-31 cap=3D8192 }, 32:{ span=3D32-39=
 cap=3D8192 }, 40:{ span=3D40-47 cap=3D8192 }, 48:{ span=3D48-55 cap=3D8192=
 }, 56:{ span=3D56-63 cap=3D8192 }, 64:{ span=3D64-71 cap=3D8192 }, 72:{ sp=
an=3D72-79 cap=3D8192 }, 80:{ span=3D80-87 cap=3D8192 }, 88:{ span=3D88-95 =
cap=3D8192 }, 96:{ span=3D96-103 cap=3D8192 }, 104:{ span=3D104-111 cap=3D8=
192 }, 112:{ span=3D112-119 cap=3D8192 }, 120:{ span=3D120-127 cap=3D8192 }=
, 128:{ span=3D128-135 cap=3D8192 }, 136:{ span=3D136-143 cap=3D8192 }, 144=
:{ span=3D144-151 cap=3D8192 }, 152:{ span=3D152-159 cap=3D8192 }, 160:{ sp=
an=3D160-167 cap=3D8192 }, 168:{ span=3D168-175 cap=3D8192 }, 176:{ span=3D=
176-183 cap=3D8192 }, 184:{ span=3D184-191 cap=3D8192 }, 192:{ span=3D192-1=
99 cap=3D8192 }, 200:{ span=3D200-207 cap=3D8192 }, 208:{ span=3D208-215 ca=
p=3D8192}, 216:{ span=3D216-223 cap=3D8192 }, 224:{ span=3D224-231 cap=3D81=
92 }, 232:{ span=3D232-239 cap=3D8192 }, 240:{ span=3D240-247 cap=3D8192 },=
 248:{ span=3D248-255 cap=3D8192 }, 256:{ span=3D256-263 cap=3D8192 }, 264:=
{ span=3D264-271 cap=3D8192 }, 272:{ span=3D272-279 cap=3D8192 }, 280:{ spa=
n=3D280-287 cap=3D8192 }, 288:{ span=3D288-295 cap=3D8192 }, 296:{ span=3D2=
96-303 cap=3D8192 }


For  CPU 8
domain-0: span=3D8-15 level=3DSMT
 groups: 8:{ span=3D8 }, 9:{ span=3D9 }, 10:{ span=3D10 }, 11:{ span=3D11 }=
, 12:{ span=3D12 }, 13:{ span=3D13 }, 14:{ span=3D14 }, 15:{ span=3D15 }
 domain-1: span=3D0-303 level=3DDIE
  groups: 8:{ span=3D8-15 cap=3D8192 }, 16:{ span=3D16-23 cap=3D8192 }, 24:=
{ span=3D24-31 cap=3D8192 }, 32:{ span=3D32-39 cap=3D8192 }, 40:{ span=3D40=
-47 cap=3D8192 }, 48:{ span=3D48-55 cap=3D8192 }, 56:{ span=3D56-63 cap=3D8=
192 }, 64:{ span=3D64-71 cap=3D8192 }, 72:{ span=3D72-79 cap=3D8192 }, 80:{=
 span=3D80-87 cap=3D8192 }, 88:{ span=3D88-95 cap=3D8192 }, 96:{ span=3D96-=
103 cap=3D8192 }, 104:{ span=3D104-111 cap=3D8192 }, 112:{ span=3D112-119 c=
ap=3D8192 }, 120:{ span=3D120-127 cap=3D8192 }, 128:{ span=3D128-135 cap=3D=
8192 }, 136:{ span=3D136-143 cap=3D8192 }, 144:{ span=3D144-151 cap=3D8192 =
}, 152:{ span=3D152-159 cap=3D8192 }, 160:{ span=3D160-167 cap=3D8192 }, 16=
8:{ span=3D168-175 cap=3D8192 }, 176:{ span=3D176-183 cap=3D8192 }, 184:{ s=
pan=3D184-191 cap=3D8192 }, 192:{ span=3D192-199 cap=3D8192 }, 200:{ span=
=3D200-207 cap=3D8192 }, 208:{ span=3D208-215 cap=3D8192 }, 216:{ span=3D21=
6-223 cap=3D8192 }, 224:{ span=3D224-231 cap=3D8192 }, 232:{ span=3D232-239=
 cap=3D8192 }, 240:{ span=3D240-247 cap=3D8192 }, 248:{ span=3D248-255 cap=
=3D8192 }, 256:{ span=3D256-263 cap=3D8192 }, 264:{ span=3D264-271 cap=3D81=
92 }, 272:{ span=3D272-279 cap=3D8192 }, 280:{ span=3D280-287 cap=3D8192 },=
 288:{ span=3D288-295 cap=3D8192 }, 296:{ span=3D296-303 cap=3D8192 }, 0:{ =
span=3D0-7 cap=3D8192 }

For  CPU 9=20
domain-0: span=3D8-15 level=3DSMT
 groups: 9:{ span=3D9 }, 10:{ span=3D10 }, 11:{ span=3D11 }, 12:{ span=3D12=
 }, 13:{ span=3D13 }, 14:{ span=3D14 }, 15:{ span=3D15 }, 8:{ span=3D8 }
 domain-1: span=3D0-303 level=3DDIE
  groups: 8:{ span=3D8-15 cap=3D8192 }, 16:{ span=3D16-23 cap=3D8192 }, 24:=
{ span=3D24-31 cap=3D8192 }, 32:{ span=3D32-39 cap=3D8192 }, 40:{ span=3D40=
-47 cap=3D8192 }, 48:{ span=3D48-55 cap=3D8192 }, 56:{ span=3D56-63 cap=3D8=
192 }, 64:{ span=3D64-71 cap=3D8192 }, 72:{ span=3D72-79 cap=3D8192 }, 80:{=
 span=3D80-87 cap=3D8192 }, 88:{ span=3D88-95 cap=3D8192 }, 96:{ span=3D96-=
103 cap=3D8192 }, 104:{ span=3D104-111 cap=3D8192 }, 112:{ span=3D112-119 c=
ap=3D8192 }, 120:{ span=3D120-127 cap=3D8192 }, 128:{ span=3D128-135 cap=3D=
8192 }, 136:{ span=3D136-143 cap=3D8192 }, 144:{ span=3D144-151 cap=3D8192 =
}, 152:{ span=3D152-159 cap=3D8192 }, 160:{ span=3D160-167 cap=3D8192 }, 16=
8:{ span=3D168-175 cap=3D8192 }, 176:{ span=3D176-183 cap=3D8192 }, 184:{ s=
pan=3D184-191 cap=3D8192 }, 192:{ span=3D192-199 cap=3D8192 }, 200:{ span=
=3D200-207 cap=3D8192 }, 208:{ span=3D208-215 cap=3D8192 }, 216:{ span=3D21=
6-223 cap=3D8192 }, 224:{ span=3D224-231 cap=3D8192 }, 232:{ span=3D232-239=
 cap=3D8192 }, 240:{ span=3D240-247 cap=3D8192 }, 248:{ span=3D248-255 cap=
=3D8192 }, 256:{ span=3D256-263 cap=3D8192 }, 264:{ span=3D264-271 cap=3D81=
92 }, 272:{ span=3D272-279 cap=3D8192 }, 280:{ span=3D280-287 cap=3D8192 },=
 288:{ span=3D288-295 cap=3D8192 }, 296:{ span=3D296-303 cap=3D8192 }, 0:{ =
span=3D0-7 cap=3D8192 }


After topology update.

For CPU 0
domain-0: span=3D0-7 level=3DSMT
 groups: 0:{ span=3D0 }, 1:{ span=3D1 }, 2:{ span=3D2 }, 3:{ span=3D3 }, 4:=
{ span=3D4 }, 5:{ span=3D5 }, 6:{ span=3D6 }, 7:{ span=3D7 }
 domain-1: span=3D0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-231,25=
6-263,288-295 level=3DDIE
  groups: 0:{ span=3D0-7 cap=3D8192 }, 32:{ span=3D32-39 cap=3D8192 }, 64:{=
 span=3D64-71 cap=3D8192 }, 96:{ span=3D96-103 cap=3D8192 }, 128:{ span=3D1=
28-135 cap=3D8192 }, 160:{ span=3D160-167 cap=3D8192 }, 192:{ span=3D192-19=
9 cap=3D8192 }, 224:{ span=3D224-231 cap=3D8192 }, 256:{ span=3D256-263 cap=
=3D8192 }, 288:{ span=3D288-295 cap=3D8192 }
  domain-2: span=3D0-303 level=3DNODE
   groups: 0:{ span=3D0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-23=
1,256-263,288-295 cap=3D81920 }, 8:{ span=3D8-15,40-47,72-79,104-111,136-14=
3,168-175,200-207,232-239,264-271,296-303 cap=3D81920 }, 16:{ span=3D16-23,=
48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=3D73728 }, =
24:{ span=3D24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-2=
87 cap=3D73728 }

For CPU 1
domain-0: span=3D0-7 level=3DSMT
 groups: 1:{ span=3D1 }, 2:{ span=3D2 }, 3:{ span=3D3 }, 4:{ span=3D4 }, 5:=
{ span=3D5 }, 6:{ span=3D6 }, 7:{ span=3D7 }, 0:{ span=3D0 }
 domain-1: span=3D0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-231,25=
6-263,288-295 level=3DDIE
  groups: 0:{ span=3D0-7 cap=3D8192 }, 32:{ span=3D32-39 cap=3D8192 }, 64:{=
 span=3D64-71 cap=3D8192 }, 96:{ span=3D96-103 cap=3D8192 }, 128:{ span=3D1=
28-135 cap=3D8192 }, 160:{ span=3D160-167 cap=3D8192 }, 192:{ span=3D192-19=
9 cap=3D8192 }, 224:{ span=3D224-231 cap=3D8192 }, 256:{ span=3D256-263 cap=
=3D8192 }, 288:{ span=3D288-295 cap=3D8192 }
  domain-2: span=3D0-303 level=3DNODE
   groups: 0:{ span=3D0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-23=
1,256-263,288-295 cap=3D81920 }, 8:{ span=3D8-15,40-47,72-79,104-111,136-14=
3,168-175,200-207,232-239,264-271,296-303 cap=3D81920 }, 16:{ span=3D16-23,=
48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=3D73728 }, =
24:{ span=3D24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-2=
87 cap=3D73728 }


For CPU 8
 domain-0: span=3D8-15 level=3DSMT
  groups: 8:{ span=3D8 }, 9:{ span=3D9 }, 10:{ span=3D10 }, 11:{ span=3D11 =
}, 12:{ span=3D12 }, 13:{ span=3D13 }, 14:{ span=3D14 }, 15:{ span=3D15 }
  domain-1: span=3D8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239=
,264-271,296-303 level=3DDIE
   groups: 8:{ span=3D8-15 cap=3D8192 }, 40:{ span=3D40-47 cap=3D8192 }, 72=
:{ span=3D72-79 cap=3D8192 }, 104:{ span=3D104-111 cap=3D8192 }, 136:{ span=
=3D136-143 cap=3D8192 }, 168:{ span=3D168-175 cap=3D8192 }, 200:{ span=3D20=
0-207 cap=3D8192 }, 232:{ span=3D232-239 cap=3D8192 }, 264:{ span=3D264-271=
 cap=3D8192 }, 296:{ span=3D296-303 cap=3D8192 }
   domain-2: span=3D8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-23=
9,264-271,296-303 level=3DNODE
    groups: 8:{ span=3D8-15,40-47,72-79,104-111,136-143,168-175,200-207,232=
-239,264-271,296-303 cap=3D81920 }
    domain-3: span=3D0-303 level=3DNUMA
     groups: 8:{ span=3D8-15,40-47,72-79,104-111,136-143,168-175,200-207,23=
2-239,264-271,296-303 cap=3D81920 }, 16:{ span=3D16-23,48-55,80-87,112-119,=
144-151,176-183,208-215,240-247,272-279 cap=3D73728 }, 24:{ span=3D24-31,56=
-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=3D73728 }
ERROR: groups don't span domain->span

For CPU 9
 domain-0: span=3D8-15 level=3DSMT
  groups: 9:{ span=3D9 }, 10:{ span=3D10 }, 11:{ span=3D11 }, 12:{ span=3D1=
2 }, 13:{ span=3D13 }, 14:{ span=3D14 }, 15:{ span=3D15 }, 8:{ span=3D8 }
  domain-1: span=3D8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239=
,264-271,296-303 level=3DDIE
   groups: 8:{ span=3D8-15 cap=3D8192 }, 40:{ span=3D40-47 cap=3D8192 }, 72=
:{ span=3D72-79 cap=3D8192 }, 104:{ span=3D104-111 cap=3D8192 }, 136:{ span=
=3D136-143 cap=3D8192 }, 168:{ span=3D168-175 cap=3D8192 }, 200:{ span=3D20=
0-207 cap=3D8192 }, 232:{ span=3D232-239 cap=3D8192 }, 264:{ span=3D264-271=
 cap=3D8192 }, 296:{ span=3D296-303 cap=3D8192 }
   domain-2: span=3D8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-23=
9,264-271,296-303 level=3DNODE
    groups: 8:{ span=3D8-15,40-47,72-79,104-111,136-143,168-175,200-207,232=
-239,264-271,296-303 cap=3D81920 }
    domain-3: span=3D0-303 level=3DNUMA
     groups: 8:{ span=3D8-15,40-47,72-79,104-111,136-143,168-175,200-207,23=
2-239,264-271,296-303 cap=3D81920 }, 16:{ span=3D16-23,48-55,80-87,112-119,=
144-151,176-183,208-215,240-247,272-279 cap=3D73728 }, 24:{ span=3D24-31,56=
-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=3D73728 }
ERROR: groups don't span domain->span

--=20
Thanks and Regards
Srikar Dronamraju

Re: [PATCH] sched/topology: Use Identity node only if required

From: Peter Zijlstra <peterz@infradead.org>
Date: 2018-08-31 10:41:39 

On Fri, Aug 31, 2018 at 03:22:48AM -0700, Srikar Dronamraju wrote:

At boot: Before topology update.
How does that work; you do SMP bringup _before_ you know the topology !?

After topology update.

For CPU 0
domain-0: span=0-7 level=SMT
 groups: 0:{ span=0 }, 1:{ span=1 }, 2:{ span=2 }, 3:{ span=3 }, 4:{ span=4 }, 5:{ span=5 }, 6:{ span=6 }, 7:{ span=7 }
 domain-1: span=0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-231,256-263,288-295 level=DIE
  groups: 0:{ span=0-7 cap=8192 }, 32:{ span=32-39 cap=8192 }, 64:{ span=64-71 cap=8192 }, 96:{ span=96-103 cap=8192 }, 128:{ span=128-135 cap=8192 }, 160:{ span=160-167 cap=8192 }, 192:{ span=192-199 cap=8192 }, 224:{ span=224-231 cap=8192 }, 256:{ span=256-263 cap=8192 }, 288:{ span=288-295 cap=8192 }
  domain-2: span=0-303 level=NODE
   groups: 0:{ span=0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-231,256-263,288-295 cap=81920 }, 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }, 16:{ span=16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=73728 }, 24:{ span=24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=73728 }

For CPU 1
domain-0: span=0-7 level=SMT
 groups: 1:{ span=1 }, 2:{ span=2 }, 3:{ span=3 }, 4:{ span=4 }, 5:{ span=5 }, 6:{ span=6 }, 7:{ span=7 }, 0:{ span=0 }
 domain-1: span=0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-231,256-263,288-295 level=DIE
  groups: 0:{ span=0-7 cap=8192 }, 32:{ span=32-39 cap=8192 }, 64:{ span=64-71 cap=8192 }, 96:{ span=96-103 cap=8192 }, 128:{ span=128-135 cap=8192 }, 160:{ span=160-167 cap=8192 }, 192:{ span=192-199 cap=8192 }, 224:{ span=224-231 cap=8192 }, 256:{ span=256-263 cap=8192 }, 288:{ span=288-295 cap=8192 }
  domain-2: span=0-303 level=NODE
   groups: 0:{ span=0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-231,256-263,288-295 cap=81920 }, 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }, 16:{ span=16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=73728 }, 24:{ span=24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=73728 }


For CPU 8
 domain-0: span=8-15 level=SMT
  groups: 8:{ span=8 }, 9:{ span=9 }, 10:{ span=10 }, 11:{ span=11 }, 12:{ span=12 }, 13:{ span=13 }, 14:{ span=14 }, 15:{ span=15 }
  domain-1: span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 level=DIE
   groups: 8:{ span=8-15 cap=8192 }, 40:{ span=40-47 cap=8192 }, 72:{ span=72-79 cap=8192 }, 104:{ span=104-111 cap=8192 }, 136:{ span=136-143 cap=8192 }, 168:{ span=168-175 cap=8192 }, 200:{ span=200-207 cap=8192 }, 232:{ span=232-239 cap=8192 }, 264:{ span=264-271 cap=8192 }, 296:{ span=296-303 cap=8192 }
   domain-2: span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 level=NODE
    groups: 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }
    domain-3: span=0-303 level=NUMA
     groups: 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }, 16:{ span=16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=73728 }, 24:{ span=24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=73728 }
ERROR: groups don't span domain->span

For CPU 9
 domain-0: span=8-15 level=SMT
  groups: 9:{ span=9 }, 10:{ span=10 }, 11:{ span=11 }, 12:{ span=12 }, 13:{ span=13 }, 14:{ span=14 }, 15:{ span=15 }, 8:{ span=8 }
  domain-1: span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 level=DIE
   groups: 8:{ span=8-15 cap=8192 }, 40:{ span=40-47 cap=8192 }, 72:{ span=72-79 cap=8192 }, 104:{ span=104-111 cap=8192 }, 136:{ span=136-143 cap=8192 }, 168:{ span=168-175 cap=8192 }, 200:{ span=200-207 cap=8192 }, 232:{ span=232-239 cap=8192 }, 264:{ span=264-271 cap=8192 }, 296:{ span=296-303 cap=8192 }
   domain-2: span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 level=NODE
    groups: 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }
    domain-3: span=0-303 level=NUMA
     groups: 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }, 16:{ span=16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=73728 }, 24:{ span=24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=73728 }
ERROR: groups don't span domain->span
This is all very confused... and does not include the error we saw
earlier.

CPU 0 has: SMT, DIE, NODE
CPU 8 has: SMT, DIE, NODE, NUMA

Something is completely buggered in your topology setup.

Re: [PATCH] sched/topology: Use Identity node only if required

From: Srikar Dronamraju <hidden>
Date: 2018-08-31 11:26:33 

* Peter Zijlstra [off-list ref] [2018-08-31 12:41:15]:

On Fri, Aug 31, 2018 at 03:22:48AM -0700, Srikar Dronamraju wrote:
quoted
At boot: Before topology update.
How does that work; you do SMP bringup _before_ you know the topology !?
If you look at the other mail that I sent, the system boots to its regular
state with a certain topology. The hypervisor might detect and push topology
updates after the system has been booted and initialized.  This topology
update can happen much much later after boot. We boot with a particular
topology and a later point of time, the topology update event occurs.
quoted
After topology update.

For CPU 0
domain-0: span=0-7 level=SMT
 groups: 0:{ span=0 }, 1:{ span=1 }, 2:{ span=2 }, 3:{ span=3 }, 4:{ span=4 }, 5:{ span=5 }, 6:{ span=6 }, 7:{ span=7 }
 domain-1: span=0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-231,256-263,288-295 level=DIE
  groups: 0:{ span=0-7 cap=8192 }, 32:{ span=32-39 cap=8192 }, 64:{ span=64-71 cap=8192 }, 96:{ span=96-103 cap=8192 }, 128:{ span=128-135 cap=8192 }, 160:{ span=160-167 cap=8192 }, 192:{ span=192-199 cap=8192 }, 224:{ span=224-231 cap=8192 }, 256:{ span=256-263 cap=8192 }, 288:{ span=288-295 cap=8192 }
  domain-2: span=0-303 level=NODE
   groups: 0:{ span=0-7,32-39,64-71,96-103,128-135,160-167,192-199,224-231,256-263,288-295 cap=81920 }, 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }, 16:{ span=16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=73728 }, 24:{ span=24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=73728 }
quoted
For CPU 9
 domain-0: span=8-15 level=SMT
  groups: 9:{ span=9 }, 10:{ span=10 }, 11:{ span=11 }, 12:{ span=12 }, 13:{ span=13 }, 14:{ span=14 }, 15:{ span=15 }, 8:{ span=8 }
  domain-1: span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 level=DIE
   groups: 8:{ span=8-15 cap=8192 }, 40:{ span=40-47 cap=8192 }, 72:{ span=72-79 cap=8192 }, 104:{ span=104-111 cap=8192 }, 136:{ span=136-143 cap=8192 }, 168:{ span=168-175 cap=8192 }, 200:{ span=200-207 cap=8192 }, 232:{ span=232-239 cap=8192 }, 264:{ span=264-271 cap=8192 }, 296:{ span=296-303 cap=8192 }
   domain-2: span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 level=NODE
    groups: 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }
    domain-3: span=0-303 level=NUMA
     groups: 8:{ span=8-15,40-47,72-79,104-111,136-143,168-175,200-207,232-239,264-271,296-303 cap=81920 }, 16:{ span=16-23,48-55,80-87,112-119,144-151,176-183,208-215,240-247,272-279 cap=73728 }, 24:{ span=24-31,56-63,88-95,120-127,152-159,184-191,216-223,248-255,280-287 cap=73728 }
ERROR: groups don't span domain->span
This is all very confused... and does not include the error we saw
earlier.
CPU 0 has: SMT, DIE, NODE
CPU 8 has: SMT, DIE, NODE, NUMA
This was the same in my previous posting too. Before the topology update
happened, all the cpus would be in SMT, DIE. The topology updates can be
disabled using a kernel parameter topology_updates=off. Its documented under
https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html as

      topology_updates= [KNL, PPC, NUMA] Format: {off} Specify if the kernel
      should ignore (off) topology updates sent by the hypervisor to this
      LPAR.

and is not something new in powerpc.

Something is completely buggered in your topology setup.





  

    
Re: [PATCH] sched/topology: Use Identity node only if required

    

      From: Peter Zijlstra <peterz@infradead.org>

      Date: 2018-08-31 12:06:59 
    

  

  
On Fri, Aug 31, 2018 at 04:56:18PM +0530, Srikar Dronamraju wrote:
This was the same in my previous posting too. Before the topology update
happened, all the cpus would be in SMT, DIE. The topology updates can be
disabled using a kernel parameter topology_updates=off. Its documented under
https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html as

      topology_updates= [KNL, PPC, NUMA] Format: {off} Specify if the kernel
      should ignore (off) topology updates sent by the hypervisor to this
      LPAR.

and is not something new in powerpc.
Doesn't mean it isn't utterly broken.




    
  

  
    

      

        Keyboard shortcuts
      

      

        
          
hback out one level

          
jnext message in thread

          
kprevious message in thread

          
ldrill in

          
Escclose help / fold thread tree

          
?toggle this help