Hi all,
I get the following from a powerpc_ppc44x defconfig build in current
linux-next:
arch/powerpc/boot/ebony.dtb: Warning (pci_bridge): /plb/pci@20ec00000: missing bus-range for PCI bridge
arch/powerpc/boot/ebony.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/ebony.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/sequoia.dtb: Warning (pci_bridge): /plb/pci@1ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/sequoia.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/sequoia.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/sam440ep.dtb: Warning (pci_bridge): /plb/pci@ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/sam440ep.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/sam440ep.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/rainier.dtb: Warning (pci_bridge): /plb/pci@1ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/rainier.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/rainier.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/taishan.dtb: Warning (pci_bridge): /plb/pci@20ec00000: missing bus-range for PCI bridge
arch/powerpc/boot/taishan.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/taishan.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/bamboo.dtb: Warning (pci_bridge): /plb/pci@ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/bamboo.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/bamboo.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/katmai.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie"
arch/powerpc/boot/katmai.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie"
arch/powerpc/boot/katmai.dtb: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie"
arch/powerpc/boot/katmai.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/katmai.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/warp.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/yosemite.dtb: Warning (pci_bridge): /plb/pci@ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/yosemite.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/yosemite.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
I though someone might like to do something about them ...
--
Cheers,
Stephen Rothwell
Stephen Rothwell [off-list ref] writes:
Hi all,
I get the following from a powerpc_ppc44x defconfig build in current
linux-next:
arch/powerpc/boot/ebony.dtb: Warning (pci_bridge): /plb/pci@20ec00000: missing bus-range for PCI bridge
arch/powerpc/boot/ebony.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/ebony.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/sequoia.dtb: Warning (pci_bridge): /plb/pci@1ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/sequoia.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/sequoia.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/sam440ep.dtb: Warning (pci_bridge): /plb/pci@ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/sam440ep.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/sam440ep.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/rainier.dtb: Warning (pci_bridge): /plb/pci@1ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/rainier.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/rainier.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/taishan.dtb: Warning (pci_bridge): /plb/pci@20ec00000: missing bus-range for PCI bridge
arch/powerpc/boot/taishan.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/taishan.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/bamboo.dtb: Warning (pci_bridge): /plb/pci@ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/bamboo.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/bamboo.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/katmai.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie"
arch/powerpc/boot/katmai.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie"
arch/powerpc/boot/katmai.dtb: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie"
arch/powerpc/boot/katmai.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/katmai.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/warp.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/yosemite.dtb: Warning (pci_bridge): /plb/pci@ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/yosemite.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/yosemite.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
I though someone might like to do something about them ...
Feel free!
Oh that's not what you meant :P
Rob sent a patch to fix most of them:
http://patchwork.ozlabs.org/patch/879475/
I thought he was going to merge it, but actually I'm not sure why I
thought that. So I should probably merge it.
cheers
Hi Michael,
On Sat, 17 Mar 2018 01:13:36 +1100 Michael Ellerman [off-list ref] wrote:
Stephen Rothwell [off-list ref] writes:
quoted
I get the following from a powerpc_ppc44x defconfig build in current
linux-next:
arch/powerpc/boot/ebony.dtb: Warning (pci_bridge): /plb/pci@20ec00000: missing bus-range for PCI bridge
arch/powerpc/boot/ebony.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/ebony.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/sequoia.dtb: Warning (pci_bridge): /plb/pci@1ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/sequoia.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/sequoia.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/sam440ep.dtb: Warning (pci_bridge): /plb/pci@ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/sam440ep.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/sam440ep.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/rainier.dtb: Warning (pci_bridge): /plb/pci@1ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/rainier.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/rainier.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/taishan.dtb: Warning (pci_bridge): /plb/pci@20ec00000: missing bus-range for PCI bridge
arch/powerpc/boot/taishan.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/taishan.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/bamboo.dtb: Warning (pci_bridge): /plb/pci@ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/bamboo.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/bamboo.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/katmai.dtb: Warning (pci_bridge): /plb/pciex@d00000000: node name is not "pci" or "pcie"
arch/powerpc/boot/katmai.dtb: Warning (pci_bridge): /plb/pciex@d20000000: node name is not "pci" or "pcie"
arch/powerpc/boot/katmai.dtb: Warning (pci_bridge): /plb/pciex@d40000000: node name is not "pci" or "pcie"
arch/powerpc/boot/katmai.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/katmai.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/warp.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
arch/powerpc/boot/yosemite.dtb: Warning (pci_bridge): /plb/pci@ec000000: missing bus-range for PCI bridge
arch/powerpc/boot/yosemite.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
arch/powerpc/boot/yosemite.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead
I though someone might like to do something about them ...
Feel free!
Oh that's not what you meant :P
:-)
Rob sent a patch to fix most of them:
http://patchwork.ozlabs.org/patch/879475/
I thought he was going to merge it, but actually I'm not sure why I
thought that. So I should probably merge it.
excellent, thanks
--
Cheers,
Stephen Rothwell