powerpc-linux-gnu-ld: cannot open linker script file arch/powerpc/boot/zImage.coff.lds: No such file or directory

5 messages, 2 authors, 2018-02-09 · open the first message on its own page

powerpc-linux-gnu-ld: cannot open linker script file arch/powerpc/boot/zImage.coff.lds: No such file or directory

From: Mathieu Malaterre <hidden>
Date: 2018-02-09 11:52:26

Hi there,

Is anyone using O= output directory option ?

It seems that git/master is failing:

$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
$ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage
(...)
Entry Point:  00b001e8
  DTC     arch/powerpc/boot/asp834x-redboot.dtb
  WRAP    arch/powerpc/boot/dtbImage.asp834x-redboot
INFO: Uncompressed kernel (size 0xa51720) overlaps the address of the
wrapper(0x400000)
INFO: Fixing the link_address of wrapper to (0xb00000)
  WRAP    arch/powerpc/boot/zImage.coff
powerpc-linux-gnu-ld: cannot open linker script file
arch/powerpc/boot/zImage.coff.lds: No such file or directory
../arch/powerpc/boot/Makefile:375: recipe for target
'arch/powerpc/boot/zImage.coff' failed
make[2]: *** [arch/powerpc/boot/zImage.coff] Error 1
rm arch/powerpc/boot/pq2fads.dtb arch/powerpc/boot/mpc836x_mds.dtb
arch/powerpc/boot/mpc832x_mds.dtb arch/powerpc/boot/mpc832x_rdb.dtb
arch/powerpc/boot/mpc834x_mds.dtb
arch/powerpc/boot/asp834x-redboot.dtb arch/powerpc/boot/mpc8272ads.dtb
arch/powerpc/boot/mpc8349emitx.dtb
arch/powerpc/boot/mpc8349emitxgp.dtb arch/powerpc/boot/ep8248e.dtb
arch/powerpc/Makefile:291: recipe for target 'zImage' failed
make[1]: *** [zImage] Error 2

Re: powerpc-linux-gnu-ld: cannot open linker script file arch/powerpc/boot/zImage.coff.lds: No such file or directory

From: Segher Boessenkool <hidden>
Date: 2018-02-09 14:48:40

Hi!

On Fri, Feb 09, 2018 at 12:52:03PM +0100, Mathieu Malaterre wrote:

Is anyone using O= output directory option ?

Yes, always.

It seems that git/master is failing:

$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
$ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage

Works fine for me (exact same arch and defconfig).  Two differences:
1) I also set CROSS_COMPILE during the config step;
2) I don't build zImage, just the default (but manual "make zImage"
afterwards works fine).

  WRAP    arch/powerpc/boot/zImage.coff
powerpc-linux-gnu-ld: cannot open linker script file
arch/powerpc/boot/zImage.coff.lds: No such file or directory
../arch/powerpc/boot/Makefile:375: recipe for target
'arch/powerpc/boot/zImage.coff' failed
make[2]: *** [arch/powerpc/boot/zImage.coff] Error 1

Add V=1?


Segher

Re: powerpc-linux-gnu-ld: cannot open linker script file arch/powerpc/boot/zImage.coff.lds: No such file or directory

From: Mathieu Malaterre <hidden>
Date: 2018-02-09 15:55:43

Segher,

On Fri, Feb 9, 2018 at 3:48 PM, Segher Boessenkool
[off-list ref] wrote:

Hi!

On Fri, Feb 09, 2018 at 12:52:03PM +0100, Mathieu Malaterre wrote:

quoted

Is anyone using O= output directory option ?

Yes, always.

Great !

quoted

It seems that git/master is failing:

$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
$ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage

Works fine for me (exact same arch and defconfig).  Two differences:
1) I also set CROSS_COMPILE during the config step;
2) I don't build zImage, just the default (but manual "make zImage"
afterwards works fine).

Could you run command (2) a second time on your system.

quoted

  WRAP    arch/powerpc/boot/zImage.coff
powerpc-linux-gnu-ld: cannot open linker script file
arch/powerpc/boot/zImage.coff.lds: No such file or directory
../arch/powerpc/boot/Makefile:375: recipe for target
'arch/powerpc/boot/zImage.coff' failed
make[2]: *** [arch/powerpc/boot/zImage.coff] Error 1

Add V=1?

Full steps:

$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
$ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage
-> ok so far
$ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-
make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
  CHK     include/config/kernel.release
  GEN     ./Makefile
  CHK     include/generated/uapi/linux/version.h
  Using .. as source for kernel
  .. is not clean, please run 'make mrproper'
  in the '..' directory.
/home/mathieu/tmp/linux/Makefile:1074: recipe for target 'prepare3' failed
make[1]: *** [prepare3] Error 1
make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
Makefile:146: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2

Then even after a mrproper I enter in an odd state:

$ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- mrproper
make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
rm -f .tmp_symbols.txt
  CLEAN   scripts/basic
  CLEAN   scripts/kconfig
  CLEAN   include/config include/generated arch/powerpc/include/generated
  CLEAN   .config
make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
mathieu@vostrodell:~/tmp/linux$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
  HOSTCC  scripts/basic/fixdep
  GEN     ./Makefile
  HOSTCC  scripts/kconfig/conf.o
  YACC    scripts/kconfig/zconf.tab.c
  LEX     scripts/kconfig/zconf.lex.c
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
#
# configuration written to .config
#
make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
$ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- V=1
make -C /home/mathieu/tmp/linux/ppc6xx KBUILD_SRC=/home/mathieu/tmp/linux \
-f /home/mathieu/tmp/linux/Makefile
make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
set -e; : '  CHK     include/config/kernel.release'; mkdir -p
include/config/; echo "4.15.0$(/bin/bash ../scripts/setlocalversion
..)" < include/config/auto.conf > include/config/kernel.release.tmp;
if [ -r include/config/kernel.release ] && cmp -s
include/config/kernel.release include/config/kernel.release.tmp; then
rm -f include/config/kernel.release.tmp; else : '  UPD
include/config/kernel.release'; mv -f
include/config/kernel.release.tmp include/config/kernel.release; fi
ln -fsn .. source
make -f ../scripts/Makefile.asm-generic \
            src=uapi/asm obj=arch/powerpc/include/generated/uapi/asm
/bin/bash ../scripts/mkmakefile \
    .. . 4 15
  GEN     ./Makefile
set -e; : '  CHK     include/generated/uapi/linux/version.h'; mkdir -p
include/generated/uapi/linux/; (echo \#define LINUX_VERSION_CODE
265984; echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8)
+ (c))';) < ../Makefile > include/generated/uapi/linux/version.h.tmp;
if [ -r include/generated/uapi/linux/version.h ] && cmp -s
include/generated/uapi/linux/version.h
include/generated/uapi/linux/version.h.tmp; then rm -f
include/generated/uapi/linux/version.h.tmp; else : '  UPD
include/generated/uapi/linux/version.h'; mv -f
include/generated/uapi/linux/version.h.tmp
include/generated/uapi/linux/version.h; fi
make -f ../scripts/Makefile.build obj=scripts/basic
rm -f include/linux/version.h
awk '!x[$0]++' init/modules.builtin usr/modules.builtin
arch/powerpc/kernel/modules.builtin arch/powerpc/mm/modules.builtin
arch/powerpc/lib/modules.builtin arch/powerpc/sysdev/modules.builtin
arch/powerpc/platforms/modules.builtin
arch/powerpc/math-emu/modules.builtin
arch/powerpc/crypto/modules.builtin arch/powerpc/net/modules.builtin
arch/powerpc/xmon/modules.builtin arch/powerpc/perf/modules.builtin
kernel/modules.builtin certs/modules.builtin mm/modules.builtin
fs/modules.builtin ipc/modules.builtin security/modules.builtin
crypto/modules.builtin block/modules.builtin drivers/modules.builtin
sound/modules.builtin firmware/modules.builtin
arch/powerpc/oprofile/modules.builtin net/modules.builtin
lib/modules.builtin virt/modules.builtin > ./modules.builtin
(cat /dev/null; ) > scripts/basic/modules.order
rm -f .tmp_quiet_recordmcount
make -f ../scripts/Makefile.asm-generic \
            src=asm obj=arch/powerpc/include/generated/asm
if [ -f ../.config -o -d ../include/config ]; then \
echo >&2 "  .. is not clean, please run 'make mrproper'"; \
echo >&2 "  in the '..' directory.";\
/bin/false; \
fi;
  .. is not clean, please run 'make mrproper'
  in the '..' directory.
/home/mathieu/tmp/linux/Makefile:1074: recipe for target 'prepare3' failed
make[1]: *** [prepare3] Error 1
make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
Makefile:146: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2


Current commit is f1517df8701c9f12dae9ce7f43a5d300a6917619 on my side,
no local change.

Re: powerpc-linux-gnu-ld: cannot open linker script file arch/powerpc/boot/zImage.coff.lds: No such file or directory

From: Mathieu Malaterre <hidden>
Date: 2018-02-09 16:24:08

On Fri, Feb 9, 2018 at 4:55 PM, Mathieu Malaterre [off-list ref] wrote:

Segher,

On Fri, Feb 9, 2018 at 3:48 PM, Segher Boessenkool
[off-list ref] wrote:

quoted

Hi!

On Fri, Feb 09, 2018 at 12:52:03PM +0100, Mathieu Malaterre wrote:

quoted

Is anyone using O= output directory option ?

Yes, always.

Great !

quoted

It seems that git/master is failing:

$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
$ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage

Works fine for me (exact same arch and defconfig).  Two differences:
1) I also set CROSS_COMPILE during the config step;
2) I don't build zImage, just the default (but manual "make zImage"
afterwards works fine).

Could you run command (2) a second time on your system.

quoted

  WRAP    arch/powerpc/boot/zImage.coff
powerpc-linux-gnu-ld: cannot open linker script file
arch/powerpc/boot/zImage.coff.lds: No such file or directory
../arch/powerpc/boot/Makefile:375: recipe for target
'arch/powerpc/boot/zImage.coff' failed
make[2]: *** [arch/powerpc/boot/zImage.coff] Error 1

Add V=1?

Full steps:

$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
$ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage
-> ok so far
$ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-
make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
  CHK     include/config/kernel.release
  GEN     ./Makefile
  CHK     include/generated/uapi/linux/version.h
  Using .. as source for kernel
  .. is not clean, please run 'make mrproper'
  in the '..' directory.
/home/mathieu/tmp/linux/Makefile:1074: recipe for target 'prepare3' failed
make[1]: *** [prepare3] Error 1
make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
Makefile:146: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2

Then even after a mrproper I enter in an odd state:

$ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- mrproper
make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
rm -f .tmp_symbols.txt
  CLEAN   scripts/basic
  CLEAN   scripts/kconfig
  CLEAN   include/config include/generated arch/powerpc/include/generated
  CLEAN   .config
make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
mathieu@vostrodell:~/tmp/linux$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
  HOSTCC  scripts/basic/fixdep
  GEN     ./Makefile
  HOSTCC  scripts/kconfig/conf.o
  YACC    scripts/kconfig/zconf.tab.c
  LEX     scripts/kconfig/zconf.lex.c
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
#
# configuration written to .config
#
make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
$ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- V=1
make -C /home/mathieu/tmp/linux/ppc6xx KBUILD_SRC=/home/mathieu/tmp/linux \
-f /home/mathieu/tmp/linux/Makefile
make[1]: Entering directory '/home/mathieu/tmp/linux/ppc6xx'
set -e; : '  CHK     include/config/kernel.release'; mkdir -p
include/config/; echo "4.15.0$(/bin/bash ../scripts/setlocalversion
..)" < include/config/auto.conf > include/config/kernel.release.tmp;
if [ -r include/config/kernel.release ] && cmp -s
include/config/kernel.release include/config/kernel.release.tmp; then
rm -f include/config/kernel.release.tmp; else : '  UPD
include/config/kernel.release'; mv -f
include/config/kernel.release.tmp include/config/kernel.release; fi
ln -fsn .. source
make -f ../scripts/Makefile.asm-generic \
            src=uapi/asm obj=arch/powerpc/include/generated/uapi/asm
/bin/bash ../scripts/mkmakefile \
    .. . 4 15
  GEN     ./Makefile
set -e; : '  CHK     include/generated/uapi/linux/version.h'; mkdir -p
include/generated/uapi/linux/; (echo \#define LINUX_VERSION_CODE
265984; echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8)
+ (c))';) < ../Makefile > include/generated/uapi/linux/version.h.tmp;
if [ -r include/generated/uapi/linux/version.h ] && cmp -s
include/generated/uapi/linux/version.h
include/generated/uapi/linux/version.h.tmp; then rm -f
include/generated/uapi/linux/version.h.tmp; else : '  UPD
include/generated/uapi/linux/version.h'; mv -f
include/generated/uapi/linux/version.h.tmp
include/generated/uapi/linux/version.h; fi
make -f ../scripts/Makefile.build obj=scripts/basic
rm -f include/linux/version.h
awk '!x[$0]++' init/modules.builtin usr/modules.builtin
arch/powerpc/kernel/modules.builtin arch/powerpc/mm/modules.builtin
arch/powerpc/lib/modules.builtin arch/powerpc/sysdev/modules.builtin
arch/powerpc/platforms/modules.builtin
arch/powerpc/math-emu/modules.builtin
arch/powerpc/crypto/modules.builtin arch/powerpc/net/modules.builtin
arch/powerpc/xmon/modules.builtin arch/powerpc/perf/modules.builtin
kernel/modules.builtin certs/modules.builtin mm/modules.builtin
fs/modules.builtin ipc/modules.builtin security/modules.builtin
crypto/modules.builtin block/modules.builtin drivers/modules.builtin
sound/modules.builtin firmware/modules.builtin
arch/powerpc/oprofile/modules.builtin net/modules.builtin
lib/modules.builtin virt/modules.builtin > ./modules.builtin
(cat /dev/null; ) > scripts/basic/modules.order
rm -f .tmp_quiet_recordmcount
make -f ../scripts/Makefile.asm-generic \
            src=asm obj=arch/powerpc/include/generated/asm
if [ -f ../.config -o -d ../include/config ]; then \
echo >&2 "  .. is not clean, please run 'make mrproper'"; \
echo >&2 "  in the '..' directory.";\
/bin/false; \
fi;
  .. is not clean, please run 'make mrproper'
  in the '..' directory.
/home/mathieu/tmp/linux/Makefile:1074: recipe for target 'prepare3' failed
make[1]: *** [prepare3] Error 1
make[1]: Leaving directory '/home/mathieu/tmp/linux/ppc6xx'
Makefile:146: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2


Current commit is f1517df8701c9f12dae9ce7f43a5d300a6917619 on my side,
no local change.

After yet another 'make mrproper' I can no longer reproduce the build failure.

Sorry for wasting your time :(

-M

Re: powerpc-linux-gnu-ld: cannot open linker script file arch/powerpc/boot/zImage.coff.lds: No such file or directory

From: Segher Boessenkool <hidden>
Date: 2018-02-09 20:57:07

On Fri, Feb 09, 2018 at 04:55:20PM +0100, Mathieu Malaterre wrote:

quoted

$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
$ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage

Works fine for me (exact same arch and defconfig).  Two differences:
1) I also set CROSS_COMPILE during the config step;
2) I don't build zImage, just the default (but manual "make zImage"
afterwards works fine).

Could you run command (2) a second time on your system.

That works fine, also with -j$BIG .

$ make O=ppc6xx ARCH=powerpc ppc6xx_defconfig
$ make O=ppc6xx ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- zImage
-> ok so far
$ make O=ppc6xx -j4 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-

Ah.  I configure with O=, but then cd to that dir and build without O= .
Also not in a subdir of the kernel source tree.

make ARCH=$ARCH CROSS_COMPILE=$TARGET- -C $KERNEL_SRC O=$PWD $DEFCONFIG
make ARCH=$ARCH CROSS_COMPILE=$TARGET- $MAKEOPTS

(everything run in the build dir).


Segher

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help