[RFC] macio airport how standard pccard?

Hi all,

I have a nice 1.2 GHz G4 Cube on my desk, and if I could somehow get USB 2 into it, it would be way more useful as a “thin client” ;-)

I was looking at the macio airport kernel glue, but could not immediately figure out how much standard pcmcia/cardbus that is.
Is there any chance I could hack up some kernel patch glue to get a pcmcia/pccard USB 2.0 NEC chip based card working in there - or is it totally hopeless?

Thanks for any tip and merry christmas!

	René Rebe

-- 
 ExactCODE GmbH, Lietzenburger Str. 42, DE-10789 Berlin
 http://exactcode.com | http://exactscan.com | http://ocrkit.com | http://t2-project.org | http://rene.rebe.de

On Fri, 2017-12-22 at 16:18 +0100, René Rebe wrote:

Hi all,

I have a nice 1.2 GHz G4 Cube on my desk, and if I could somehow get USB 2 into it, it would be way more useful as a “thin client” ;-)

I was looking at the macio airport kernel glue, but could not immediately figure out how much standard pcmcia/cardbus that is.
Is there any chance I could hack up some kernel patch glue to get a pcmcia/pccard USB 2.0 NEC chip based card working in there - or is it totally hopeless?

Thanks for any tip and merry christmas!

I'm not 100% sure. I think it's some kind of PCMCIA card but PCMCIA is
basically just some kind of ISA bus with control lines.

I honestly don't know much more about it.

Cheers,
Ben.