# RE: \[PATCH 08/29\] drivers, md: convert mddev.active from atomic\_t to refcount\_t

- From: Reshetova, Elena \<elena.reshetova@intel.com\>
- Date: 2017-03-14 12:29:33 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2017/03/4954338
- Thread: https://ratatoskr.run/netdev/2017/03/4947373/t.md

```text
> Elena Reshetova [ref] writes:
>=20
> > refcount_t type and corresponding API should be
> > used instead of atomic_t when the variable is used as
> > a reference counter. This allows to avoid accidental
> > refcounter overflows that might lead to use-after-free
> > situations.
> >
> > Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
> > Signed-off-by: Hans Liljestrand <redacted>
> > Signed-off-by: Kees Cook <redacted>
> > Signed-off-by: David Windsor <redacted>
> > ---
> >  drivers/md/md.c | 6 +++---
> >  drivers/md/md.h | 3 ++-
> >  2 files changed, 5 insertions(+), 4 deletions(-)
>=20
> When booting linux-next (specifically 5be4921c9958ec) I'm seeing the
> backtrace below. I suspect this patch is just exposing an existing
> issue?

Yes, we have actually been following this issue in the another thread.=20
It looks like the object is re-used somehow, but I can't quite understand h=
ow just by reading the code.=20
This was what I put into the previous thread:

"The log below indicates that you are using your refcounter in a bit weird =
way in mddev_find().=20
However, I can't find the place (just by reading the code) where you would =
increment refcounter from zero (vs. setting it to one).
It looks like you either iterate over existing nodes (and increment their c=
ounters, which should be >=3D 1 at the time of increment) or create a new n=
ode, but then mddev_init() sets the counter to 1. "

If you can help to understand what is going on with the object creation/des=
truction, would be appreciated!

Also Shaohua Li stopped this patch coming from his tree since the issue was=
 caught at that time, so we are not going to merge this until we figure it =
out.=20

Best Regards,
Elena.

>=20
> cheers
>=20
>=20
> [    0.230738] md: Waiting for all devices to be available before autodet=
ect
> [    0.230742] md: If you don't use raid, use raid=3Dnoautodetect
> [    0.230962] refcount_t: increment on 0; use-after-free.
> [    0.230988] ------------[ cut here ]------------
> [    0.230996] WARNING: CPU: 0 PID: 1 at lib/refcount.c:114
> .refcount_inc+0x5c/0x70
> [    0.231001] Modules linked in:
> [    0.231006] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc1-gccN-=
next-
> 20170310-g5be4921 #1
> [    0.231012] task: c000000049400000 task.stack: c000000049440000
> [    0.231016] NIP: c0000000005ac6bc LR: c0000000005ac6b8 CTR:
> c000000000743390
> [    0.231021] REGS: c000000049443160 TRAP: 0700   Not tainted  (4.11.0-r=
c1-
> gccN-next-20170310-g5be4921)
> [    0.231026] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>
> [    0.231033]   CR: 24024422  XER: 0000000c
> [    0.231038] CFAR: c000000000a5356c SOFTE: 1
> [    0.231038] GPR00: c0000000005ac6b8 c0000000494433e0 c000000001079d00
> 000000000000002b
> [    0.231038] GPR04: 0000000000000000 00000000000000ef 0000000000000000
> c0000000010418a0
> [    0.231038] GPR08: 000000004af80000 c000000000ecc9a8 c000000000ecc9a8
> 0000000000000000
> [    0.231038] GPR12: 0000000028024824 c000000006bb0000 0000000000000000
> c000000049443a00
> [    0.231038] GPR16: 0000000000000000 c000000049443a10 0000000000000000
> 0000000000000000
> [    0.231038] GPR20: 0000000000000000 0000000000000000 c000000000f7dd20
> 0000000000000000
> [    0.231038] GPR24: 00000000014080c0 c0000000012060b8 c000000001206080
> 0000000000000009
> [    0.231038] GPR28: c000000000f7dde0 0000000000900000 0000000000000000
> c0000000461ae800
> [    0.231100] NIP [c0000000005ac6bc] .refcount_inc+0x5c/0x70
> [    0.231104] LR [c0000000005ac6b8] .refcount_inc+0x58/0x70
> [    0.231108] Call Trace:
> [    0.231112] [c0000000494433e0] [c0000000005ac6b8] .refcount_inc+0x58/0=
x70
> (unreliable)
> [    0.231120] [c000000049443450] [c00000000086c008]
> .mddev_find+0x1e8/0x430
> [    0.231125] [c000000049443530] [c000000000872b6c] .md_open+0x2c/0x140
> [    0.231132] [c0000000494435c0] [c0000000003962a4]
> .__blkdev_get+0xd4/0x520
> [    0.231138] [c000000049443690] [c000000000396cc0] .blkdev_get+0x1c0/0x=
4f0
> [    0.231145] [c000000049443790] [c000000000336d64]
> .do_dentry_open.isra.1+0x2a4/0x410
> [    0.231152] [c000000049443830] [c0000000003523f4]
> .path_openat+0x624/0x1580
> [    0.231157] [c000000049443990] [c000000000354ce4]
> .do_filp_open+0x84/0x120
> [    0.231163] [c000000049443b10] [c000000000338d74]
> .do_sys_open+0x214/0x300
> [    0.231170] [c000000049443be0] [c000000000da69ac]
> .md_run_setup+0xa0/0xec
> [    0.231176] [c000000049443c60] [c000000000da4fbc]
> .prepare_namespace+0x60/0x240
> [    0.231182] [c000000049443ce0] [c000000000da47a8]
> .kernel_init_freeable+0x330/0x36c
> [    0.231190] [c000000049443db0] [c00000000000dc44] .kernel_init+0x24/0x=
160
> [    0.231197] [c000000049443e30] [c00000000000badc]
> .ret_from_kernel_thread+0x58/0x7c
> [    0.231202] Instruction dump:
> [    0.231206] 60000000 3d22ffee 89296bfb 2f890000 409effdc 3c62ffc6 3920=
0001
> 3d42ffee
> [    0.231216] 38630928 992a6bfb 484a6e79 60000000 <0fe00000> 4bffffb8
> 60000000 60000000
> [    0.231226] ---[ end trace 8c51f269ad91ffc2 ]---
> [    0.231233] md: Autodetecting RAID arrays.
> [    0.231236] md: autorun ...
> [    0.231239] md: ... autorun DONE.
> [    0.234188] EXT4-fs (sda4): mounting ext3 file system using the ext4 s=
ubsystem
> [    0.250506] refcount_t: underflow; use-after-free.
> [    0.250531] ------------[ cut here ]------------
> [    0.250537] WARNING: CPU: 0 PID: 3 at lib/refcount.c:207
> .refcount_dec_not_one+0x104/0x120
> [    0.250542] Modules linked in:
> [    0.250546] CPU: 0 PID: 3 Comm: kworker/0:0 Tainted: G        W       =
4.11.0-rc1-
> gccN-next-20170310-g5be4921 #1
> [    0.250553] Workqueue: events .delayed_fput
> [    0.250557] task: c000000049404900 task.stack: c000000049448000
> [    0.250562] NIP: c0000000005ac964 LR: c0000000005ac960 CTR:
> c000000000743390
> [    0.250567] REGS: c00000004944b530 TRAP: 0700   Tainted: G        W   =
     (4.11.0-
> rc1-gccN-next-20170310-g5be4921)
> [    0.250572] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>
> [    0.250578]   CR: 24002422  XER: 00000007
> [    0.250584] CFAR: c000000000a5356c SOFTE: 1
> [    0.250584] GPR00: c0000000005ac960 c00000004944b7b0 c000000001079d00
> 0000000000000026
> [    0.250584] GPR04: 0000000000000000 0000000000000113 0000000000000000
> c0000000010418a0
> [    0.250584] GPR08: 000000004af80000 c000000000ecc9a8 c000000000ecc9a8
> 0000000000000000
> [    0.250584] GPR12: 0000000022002824 c000000006bb0000 c0000000001116d0
> c000000049050200
> [    0.250584] GPR16: 0000000000000000 0000000000000000 0000000000000000
> 0000000000000000
> [    0.250584] GPR20: 0000000000000001 0000000000000000 c000000048030a98
> 0000000000000001
> [    0.250584] GPR24: 000000000002001d 0000000000000000 0000000000000000
> c0000000461af000
> [    0.250584] GPR28: 0000000000000000 c000000048030bd8 c0000000461aea08
> c0000000012060b8
> [    0.250645] NIP [c0000000005ac964] .refcount_dec_not_one+0x104/0x120
> [    0.250650] LR [c0000000005ac960] .refcount_dec_not_one+0x100/0x120
> [    0.250654] Call Trace:
> [    0.250658] [c00000004944b7b0] [c0000000005ac960]
> .refcount_dec_not_one+0x100/0x120 (unreliable)
> [    0.250665] [c00000004944b820] [c0000000005ac9a0]
> .refcount_dec_and_lock+0x20/0xc0
> [    0.250671] [c00000004944b8a0] [c000000000870fa4] .mddev_put+0x34/0x18=
0
> [    0.250677] [c00000004944b930] [c000000000396108]
> .__blkdev_put+0x288/0x350
> [    0.250683] [c00000004944ba30] [c0000000003968f0] .blkdev_close+0x30/0=
x50
> [    0.250689] [c00000004944bab0] [c00000000033e7d8] .__fput+0xc8/0x2a0
> [    0.250695] [c00000004944bb60] [c00000000033ea08]
> .delayed_fput+0x58/0x80
> [    0.250701] [c00000004944bbe0] [c000000000107ea0]
> .process_one_work+0x2a0/0x630
> [    0.250707] [c00000004944bc80] [c0000000001082c8]
> .worker_thread+0x98/0x6a0
> [    0.250713] [c00000004944bd70] [c000000000111868] .kthread+0x198/0x1a0
> [    0.250719] [c00000004944be30] [c00000000000badc]
> .ret_from_kernel_thread+0x58/0x7c
> [    0.250724] Instruction dump:
> [    0.250728] 419e000c 38210070 4e800020 7c0802a6 3c62ffc6 39200001
> 3d42ffee 38630958
> [    0.250738] 992a6bfe f8010080 484a6bd1 60000000 <0fe00000> e8010080
> 38600001 7c0803a6
> [    0.250748] ---[ end trace 8c51f269ad91ffc3 ]---
> [    0.262454] EXT4-fs (sda4): mounted filesystem with ordered data mode.=
 Opts:
> (null)
```
