From: Vipin K Parashar <hidden> Date: 2017-02-28 10:12:52
Added check for OPAL_WRONG_STATE error code returned from OPAL.
Currently Linux flashes "unexpected error" over console for this
error. This will avoid throwing such message and return I/O error
for such OPAL failures.
Signed-off-by: Vipin K Parashar <redacted>
---
Changes in v2:
- Added log message indicating sleeping/offline core
for OPAL_WRONG_STATE
arch/powerpc/platforms/powernv/opal.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
From: Stewart Smith <hidden> Date: 2017-02-28 21:08:31
Vipin K Parashar [off-list ref] writes:
quoted hunk
Added check for OPAL_WRONG_STATE error code returned from OPAL.
Currently Linux flashes "unexpected error" over console for this
error. This will avoid throwing such message and return I/O error
for such OPAL failures.
Signed-off-by: Vipin K Parashar <redacted>
---
Changes in v2:
- Added log message indicating sleeping/offline core
for OPAL_WRONG_STATE
arch/powerpc/platforms/powernv/opal.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
@@ -869,8 +869,11 @@ int opal_error_code(int rc)caseOPAL_UNSUPPORTED:return-EIO;caseOPAL_HARDWARE:return-EIO;caseOPAL_INTERNAL_ERROR:return-EIO;+caseOPAL_WRONG_STATE:+pr_notice("%s: Core sleeping/offline\n",__func__);+return-EIO;
Since this is part of opal_error_code() though, this will be printed for
any OPAL call that returns that.
Why not have the sensor code do this:
rc = opal_sensor_read(foo)
if (rc == OPAL_WRONG_STATE)
return -EIO;
else
return oal_error_code(rc);
?
From: Michael Ellerman <mpe@ellerman.id.au> Date: 2017-03-01 06:10:16
Stewart Smith [off-list ref] writes:
Vipin K Parashar [off-list ref] writes:
quoted
Added check for OPAL_WRONG_STATE error code returned from OPAL.
Currently Linux flashes "unexpected error" over console for this
error. This will avoid throwing such message and return I/O error
for such OPAL failures.
Signed-off-by: Vipin K Parashar <redacted>
---
Changes in v2:
- Added log message indicating sleeping/offline core
for OPAL_WRONG_STATE
arch/powerpc/platforms/powernv/opal.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
@@ -869,8 +869,11 @@ int opal_error_code(int rc)caseOPAL_UNSUPPORTED:return-EIO;caseOPAL_HARDWARE:return-EIO;caseOPAL_INTERNAL_ERROR:return-EIO;+caseOPAL_WRONG_STATE:+pr_notice("%s: Core sleeping/offline\n",__func__);+return-EIO;
Since this is part of opal_error_code() though, this will be printed for
any OPAL call that returns that.
Why not have the sensor code do this:
rc = opal_sensor_read(foo)
if (rc == OPAL_WRONG_STATE)
return -EIO;
else
return oal_error_code(rc);
?
Yeah, that's exactly what I said to do, though perhaps I didn't say it
clearly enough?
... changing just opal_get_sensor_data() to handle
OPAL_WRONG_STATE would be OK, with a comment explaining that we might be
asked to read a sensor on an offline CPU and we aren't able to detect
that.
cheers
From: Vipin K Parashar <hidden> Date: 2017-03-02 12:31:09
Hi Stewart/Michael,
Thanks!! for review.
Responses as below:
On Wednesday 01 March 2017 02:38 AM, Stewart Smith wrote:
Vipin K Parashar [off-list ref] writes:
quoted
Added check for OPAL_WRONG_STATE error code returned from OPAL.
Currently Linux flashes "unexpected error" over console for this
error. This will avoid throwing such message and return I/O error
for such OPAL failures.
Signed-off-by: Vipin K Parashar <redacted>
---
Changes in v2:
- Added log message indicating sleeping/offline core
for OPAL_WRONG_STATE
arch/powerpc/platforms/powernv/opal.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
@@ -869,8 +869,11 @@ int opal_error_code(int rc)caseOPAL_UNSUPPORTED:return-EIO;caseOPAL_HARDWARE:return-EIO;caseOPAL_INTERNAL_ERROR:return-EIO;+caseOPAL_WRONG_STATE:+pr_notice("%s: Core sleeping/offline\n",__func__);+return-EIO;
Since this is part of opal_error_code() though, this will be printed for
any OPAL call that returns that.
opal_error_coder is used by functions to handle OPAL error codes
and return Linux error codes. Apart from opal_get_sensor_data ()
in opal-sensor.c, opal_error_code is also getting invoked from
opal_get_sys_param( ) in opal-sysparam.c.
Handling OPAL_WRONG_STATE in opal_error_code itself, seems
modular and avoids extra checks for OPAL_WRONG_STATE after
opal_error_code usage in multiple functions.
opal_error_code is already adding a message upon OPAL_WRONG_STATE
return, so its already leaving trace about Sleeping core causing XSCOM
failure. By returning OPAL_WRONG_CODE from opal_error_code are we
planning some action like on-lining back the sleeping or off-lined core ?
Why not have the sensor code do this:
rc = opal_sensor_read(foo)
if (rc == OPAL_WRONG_STATE)
return -EIO;
else
return oal_error_code(rc);
?
This print helps in alerting about OPAL return codes that aren't
supported in
running Linux version. Helpful in catching OPAL return code that missed
out detection check in Linux.
Shall we consider reducing message severity from pr_err to pr_warn ?
From: Vipin K Parashar <hidden> Date: 2017-03-05 09:48:34
On Thursday 02 March 2017 06:00 PM, Vipin K Parashar wrote:
Hi Stewart/Michael,
Thanks!! for review.
Responses as below:
On Wednesday 01 March 2017 02:38 AM, Stewart Smith wrote:
quoted
Vipin K Parashar [off-list ref] writes:
quoted
Added check for OPAL_WRONG_STATE error code returned from OPAL.
Currently Linux flashes "unexpected error" over console for this
error. This will avoid throwing such message and return I/O error
for such OPAL failures.
Signed-off-by: Vipin K Parashar <redacted>
---
Changes in v2:
- Added log message indicating sleeping/offline core
for OPAL_WRONG_STATE
arch/powerpc/platforms/powernv/opal.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
@@ -869,8 +869,11 @@ int opal_error_code(int rc)caseOPAL_UNSUPPORTED:return-EIO;caseOPAL_HARDWARE:return-EIO;caseOPAL_INTERNAL_ERROR:return-EIO;+caseOPAL_WRONG_STATE:+pr_notice("%s: Core sleeping/offline\n",__func__);+return-EIO;
Since this is part of opal_error_code() though, this will be printed for
any OPAL call that returns that.
opal_error_coder is used by functions to handle OPAL error codes
and return Linux error codes. Apart from opal_get_sensor_data ()
in opal-sensor.c, opal_error_code is also getting invoked from
opal_get_sys_param( ) in opal-sysparam.c.
Handling OPAL_WRONG_STATE in opal_error_code itself, seems
modular and avoids extra checks for OPAL_WRONG_STATE after
opal_error_code usage in multiple functions.
opal_error_code is already adding a message upon OPAL_WRONG_STATE
return, so its already leaving trace about Sleeping core causing XSCOM
failure. By returning OPAL_WRONG_CODE from opal_error_code are we
planning some action like on-lining back the sleeping or off-lined core ?
quoted
Why not have the sensor code do this:
rc = opal_sensor_read(foo)
if (rc == OPAL_WRONG_STATE)
return -EIO;
else
return oal_error_code(rc);
?
Avoided adding OPAL_WRONG_STATE check in opal_error_code
and instead added a new case for OPAL_WRONG_STATE in
opal_get_sensor_data itself. Sending out v3 with the changes.
This print helps in alerting about OPAL return codes that aren't
supported in
running Linux version. Helpful in catching OPAL return code that missed
out detection check in Linux.
Shall we consider reducing message severity from pr_err to pr_warn ?