[PATCH] powerpc/powernv: Fix opal_exit tracepoint opcode

Currently the opal_exit tracepoint usually shows the opcode as 0:

  <idle>-0     [047] d.h.   635.654292: opal_entry: opcode=63
  <idle>-0     [047] d.h.   635.654296: opal_exit: opcode=0 retval=0
  kopald-1209  [019] d...   636.420943: opal_entry: opcode=10
  kopald-1209  [019] d...   636.420959: opal_exit: opcode=0 retval=0

This is because we incorrectly load the opcode into r0 before calling
__trace_opal_exit(), whereas it expects the opcode in r3 (first function
parameter). In fact we are leaving the retval in r3, so opcode and
retval will always show the same value.

Instead load the opcode into r3, resulting in:

  <idle>-0     [040] d.h.   636.618625: opal_entry: opcode=63
  <idle>-0     [040] d.h.   636.618627: opal_exit: opcode=63 retval=0

Fixes: c49f63530bb6 ("powernv: Add OPAL tracepoints")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
---
 arch/powerpc/platforms/powernv/opal-wrappers.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index f7c19c9c57ed..63fe1b2b1175 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S

@@ -146,7 +146,7 @@ opal_tracepoint_entry:
 opal_tracepoint_return:
 	std	r3,STK_REG(R31)(r1)
 	mr	r4,r3
-	ld	r0,STK_REG(R23)(r1)
+	ld	r3,STK_REG(R23)(r1)
 	bl	__trace_opal_exit
 	ld	r3,STK_REG(R31)(r1)
 	addi	r1,r1,STACKFRAMESIZE

-- 
2.7.4

On Tue, 2017-02-07 at 10:01:01 UTC, Michael Ellerman wrote:

Currently the opal_exit tracepoint usually shows the opcode as 0:

  <idle>-0     [047] d.h.   635.654292: opal_entry: opcode=63
  <idle>-0     [047] d.h.   635.654296: opal_exit: opcode=0 retval=0
  kopald-1209  [019] d...   636.420943: opal_entry: opcode=10
  kopald-1209  [019] d...   636.420959: opal_exit: opcode=0 retval=0

This is because we incorrectly load the opcode into r0 before calling
__trace_opal_exit(), whereas it expects the opcode in r3 (first function
parameter). In fact we are leaving the retval in r3, so opcode and
retval will always show the same value.

Instead load the opcode into r3, resulting in:

  <idle>-0     [040] d.h.   636.618625: opal_entry: opcode=63
  <idle>-0     [040] d.h.   636.618627: opal_exit: opcode=63 retval=0

Fixes: c49f63530bb6 ("powernv: Add OPAL tracepoints")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Applied to powerpc next.

https://git.kernel.org/powerpc/c/a7e0fb6c2029a780444d09560f739e

cheers