[PATCH] dt-bindings: qman: Remove pool channel node
From: Madalin Bucur <madalin.bucur@nxp.com>
Date: 2017-01-04 11:04:28
From: Scott Wood <oss@buserror.net> No device tree has these, nor does any driver look for them. Signed-off-by: Scott Wood <oss@buserror.net> --- .../devicetree/bindings/soc/fsl/qman-portals.txt | 20 -------------------- 1 file changed, 20 deletions(-)
diff --git a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
index 47e46cc..5a34f3a 100644
--- a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt@@ -5,7 +5,6 @@ Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. CONTENTS - QMan Portal - - QMan Pool Channel - Example QMan Portal Node
@@ -82,25 +81,6 @@ These subnodes should have the following properties: Definition: The phandle to the particular hardware device that this portal is connected to. -DPAA QMan Pool Channel Nodes - -Pool Channels are defined with the following properties. - -PROPERTIES - -- compatible - Usage: Required - Value type: <stringlist> - Definition: Must include "fsl,qman-pool-channel" - May include "fsl,<SoC>-qman-pool-channel" - -- fsl,qman-channel-id - Usage: Required - Value type: <u32> - Definition: The hardware index of the channel. This can also be - determined by dividing any of the channel's 8 work queue - IDs by 8 - EXAMPLE The example below shows a (P4080) QMan portals container/bus node with two portals
--
2.1.0