[PATCH 1/4] powerpc/configs: Enable VMX crypto

Subsystems: linux for powerpc (32-bit and 64-bit), the rest

STALE3598d

5 messages, 2 authors, 2016-10-05 · open the first message on its own page

[PATCH 1/4] powerpc/configs: Enable VMX crypto

From: Anton Blanchard <hidden>
Date: 2016-09-30 10:40:02

From: Anton Blanchard <redacted>

We see big improvements with the VMX crypto functions (often 10x or more),
so enable it as a module.

Signed-off-by: Anton Blanchard <redacted>
---
 arch/powerpc/configs/powernv_defconfig | 2 ++
 arch/powerpc/configs/ppc64_defconfig   | 2 ++
 arch/powerpc/configs/pseries_defconfig | 2 ++
 3 files changed, 6 insertions(+)

diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
index dce352e..3f6226b 100644
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig

@@ -310,6 +310,8 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_DEV_NX=y
+CONFIG_CRYPTO_DEV_VMX=y
+CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=m

diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 0a8d250..861471d 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig

@@ -347,6 +347,8 @@ CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_NX=y
 CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
+CONFIG_CRYPTO_DEV_VMX=y
+CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=m

diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 654aeff..670b8d5 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig

@@ -314,6 +314,8 @@ CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_NX=y
 CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
+CONFIG_CRYPTO_DEV_VMX=y
+CONFIG_CRYPTO_DEV_VMX_ENCRYPT=m
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM_BOOK3S_64=m
 CONFIG_KVM_BOOK3S_64_HV=m

-- 
2.7.4

[PATCH 2/4] powerpc/configs: Bump kernel ring buffer size on 64 bit configs

From: Anton Blanchard <hidden>
Date: 2016-09-30 10:40:03

From: Anton Blanchard <redacted>

When we issue a system reset, every CPU in the box prints an Oops,
including a backtrace. Each of these can be quite large (over 4kB)
and we may end up wrapping the ring buffer and losing important
information.

Bump the base size from 128kB to 256kB and the per CPU size from
4kB to 8kB.

Signed-off-by: Anton Blanchard <redacted>
---
 arch/powerpc/configs/powernv_defconfig | 2 ++
 arch/powerpc/configs/ppc64_defconfig   | 2 ++
 arch/powerpc/configs/pseries_defconfig | 2 ++
 3 files changed, 6 insertions(+)

diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
index 3f6226b..95b52b4 100644
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig

@@ -15,6 +15,8 @@ CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=13
 CONFIG_NUMA_BALANCING=y
 CONFIG_CGROUPS=y
 CONFIG_MEMCG=y

diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 861471d..886b237 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig

@@ -10,6 +10,8 @@ CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=13
 CONFIG_CGROUPS=y
 CONFIG_CPUSETS=y
 CONFIG_BLK_DEV_INITRD=y

diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 670b8d5..2a5dac7 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig

@@ -15,6 +15,8 @@ CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=13
 CONFIG_NUMA_BALANCING=y
 CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
 CONFIG_CGROUPS=y

-- 
2.7.4

[PATCH 3/4] powerpc/configs: Change a few things from built in to modules

From: Anton Blanchard <hidden>
Date: 2016-09-30 10:40:06

From: Anton Blanchard <redacted>

Change a few devices and filesystems that are seldom used any more
from built in to modules. This reduces our vmlinux about 500kB.

Signed-off-by: Anton Blanchard <redacted>
---
 arch/powerpc/configs/powernv_defconfig | 14 +++++++-------
 arch/powerpc/configs/ppc64_defconfig   | 14 +++++++-------
 arch/powerpc/configs/pseries_defconfig | 14 +++++++-------
 3 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
index 95b52b4..b4744fe 100644
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig

@@ -97,7 +97,7 @@ CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_GENERIC=y
 CONFIG_BLK_DEV_AMD74XX=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y

@@ -109,7 +109,7 @@ CONFIG_SCSI_CXGB4_ISCSI=m
 CONFIG_SCSI_BNX2_ISCSI=m
 CONFIG_BE2ISCSI=m
 CONFIG_SCSI_MPT2SAS=m
-CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m

@@ -151,10 +151,10 @@ CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_VIRTIO_NET=m
 CONFIG_VHOST_NET=m
-CONFIG_VORTEX=y
+CONFIG_VORTEX=m
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_PCNET32=y
+CONFIG_PCNET32=m
 CONFIG_TIGON3=y
 CONFIG_BNX2X=m
 CONFIG_CHELSIO_T1=m

@@ -240,7 +240,7 @@ CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_REISERFS_FS=y
+CONFIG_REISERFS_FS=m
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y

@@ -255,10 +255,10 @@ CONFIG_NILFS2_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 CONFIG_OVERLAY_FS=m
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y

diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 886b237..447d733 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig

@@ -92,7 +92,7 @@ CONFIG_BLK_DEV_AMD74XX=y
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y

@@ -105,7 +105,7 @@ CONFIG_BE2ISCSI=m
 CONFIG_SCSI_MPT2SAS=m
 CONFIG_SCSI_IBMVSCSI=y
 CONFIG_SCSI_IBMVFC=m
-CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m

@@ -151,10 +151,10 @@ CONFIG_NETCONSOLE=y
 CONFIG_TUN=m
 CONFIG_VIRTIO_NET=m
 CONFIG_VHOST_NET=m
-CONFIG_VORTEX=y
+CONFIG_VORTEX=m
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_PCNET32=y
+CONFIG_PCNET32=m
 CONFIG_TIGON3=y
 CONFIG_BNX2X=m
 CONFIG_CHELSIO_T1=m

@@ -271,7 +271,7 @@ CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_REISERFS_FS=y
+CONFIG_REISERFS_FS=m
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y

@@ -286,10 +286,10 @@ CONFIG_NILFS2_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 CONFIG_OVERLAY_FS=m
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y

diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 2a5dac7..e8f950d 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig

@@ -97,7 +97,7 @@ CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_GENERIC=y
 CONFIG_BLK_DEV_AMD74XX=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y

@@ -110,7 +110,7 @@ CONFIG_BE2ISCSI=m
 CONFIG_SCSI_MPT2SAS=m
 CONFIG_SCSI_IBMVSCSI=y
 CONFIG_SCSI_IBMVFC=m
-CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m

@@ -152,10 +152,10 @@ CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_VIRTIO_NET=m
 CONFIG_VHOST_NET=m
-CONFIG_VORTEX=y
+CONFIG_VORTEX=m
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_PCNET32=y
+CONFIG_PCNET32=m
 CONFIG_TIGON3=y
 CONFIG_BNX2X=m
 CONFIG_CHELSIO_T1=m

@@ -243,7 +243,7 @@ CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_REISERFS_FS=y
+CONFIG_REISERFS_FS=m
 CONFIG_REISERFS_FS_XATTR=y
 CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y

@@ -258,10 +258,10 @@ CONFIG_NILFS2_FS=m
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 CONFIG_OVERLAY_FS=m
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y

-- 
2.7.4

[PATCH 4/4] powerpc/configs: Enable Intel i40e on 64 bit configs

From: Anton Blanchard <hidden>
Date: 2016-09-30 10:40:08

From: Anton Blanchard <redacted>

We are starting to see i40e adapters in recent machines, so enable
it in our configs.

Signed-off-by: Anton Blanchard <redacted>
---
 arch/powerpc/configs/powernv_defconfig | 1 +
 arch/powerpc/configs/ppc64_defconfig   | 1 +
 arch/powerpc/configs/pseries_defconfig | 1 +
 3 files changed, 3 insertions(+)

diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
index b4744fe..d98b6eb 100644
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig

@@ -165,6 +165,7 @@ CONFIG_E1000=y
 CONFIG_E1000E=y
 CONFIG_IXGB=m
 CONFIG_IXGBE=m
+CONFIG_I40E=m
 CONFIG_MLX4_EN=m
 CONFIG_MYRI10GE=m
 CONFIG_QLGE=m

diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 447d733..58a98d4 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig

@@ -167,6 +167,7 @@ CONFIG_E1000=y
 CONFIG_E1000E=y
 CONFIG_IXGB=m
 CONFIG_IXGBE=m
+CONFIG_I40E=m
 CONFIG_MLX4_EN=m
 CONFIG_MYRI10GE=m
 CONFIG_PASEMI_MAC=y

diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index e8f950d..8a3bc01 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig

@@ -168,6 +168,7 @@ CONFIG_E1000=y
 CONFIG_E1000E=y
 CONFIG_IXGB=m
 CONFIG_IXGBE=m
+CONFIG_I40E=m
 CONFIG_MLX4_EN=m
 CONFIG_MYRI10GE=m
 CONFIG_QLGE=m

-- 
2.7.4

Re: [1/4] powerpc/configs: Enable VMX crypto

From: Michael Ellerman <hidden>
Date: 2016-10-05 02:36:25

On Fri, 2016-30-09 at 10:39:50 UTC, Anton Blanchard wrote:

From: Anton Blanchard <redacted>

We see big improvements with the VMX crypto functions (often 10x or more),
so enable it as a module.

Signed-off-by: Anton Blanchard <redacted>

Series applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/43c2394fc15028c6d846633d21ebdd

cheers

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help