[PATCH kernel v2] powerpc/powernv: Fix debug macro

Subsystems: linux for powerpc (32-bit and 64-bit), the rest

STALE3755d

2 messages, 2 authors, 2016-05-04 · open the first message on its own page

[PATCH kernel v2] powerpc/powernv: Fix debug macro

From: Alexey Kardashevskiy <hidden>
Date: 2016-05-02 07:07:16

When cfg_dbg() is enabled (i.e. mapped to printk()), gcc produces
errors as the __func__ parameter is missing (pnv_pci_cfg_read() has one);
this adds the missing parameter. Since cfg_dbg() is used not just for
config space access, this replaces it with well-known pr_devel().

Signed-off-by: Alexey Kardashevskiy <redacted>
---
Changes:
v2:
* s/cfg_dbg/pr_devel/

---
 arch/powerpc/platforms/powernv/pci.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index 73c8dc2..0db20ae 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -39,9 +39,6 @@
 /* Delay in usec */
 #define PCI_RESET_DELAY_US	3000000
 
-#define cfg_dbg(fmt...)	do { } while(0)
-//#define cfg_dbg(fmt...)	printk(fmt)
-
 #ifdef CONFIG_PCI_MSI
 int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
@@ -402,8 +399,8 @@ static void pnv_pci_config_check_eeh(struct pci_dn *pdn)
 		}
 	}
 
-	cfg_dbg(" -> EEH check, bdfn=%04x PE#%d fstate=%x\n",
-		(pdn->busno << 8) | (pdn->devfn), pe_no, fstate);
+	pr_devel(" -> EEH check, bdfn=%04x PE#%d fstate=%x\n",
+		 (pdn->busno << 8) | (pdn->devfn), pe_no, fstate);
 
 	/* Clear the frozen state if applicable */
 	if (fstate == OPAL_EEH_STOPPED_MMIO_FREEZE ||
@@ -451,8 +448,8 @@ int pnv_pci_cfg_read(struct pci_dn *pdn,
 		return PCIBIOS_FUNC_NOT_SUPPORTED;
 	}
 
-	cfg_dbg("%s: bus: %x devfn: %x +%x/%x -> %08x\n",
-		__func__, pdn->busno, pdn->devfn, where, size, *val);
+	pr_devel("%s: bus: %x devfn: %x +%x/%x -> %08x\n",
+		 __func__, pdn->busno, pdn->devfn, where, size, *val);
 	return PCIBIOS_SUCCESSFUL;
 }
 
@@ -462,8 +459,8 @@ int pnv_pci_cfg_write(struct pci_dn *pdn,
 	struct pnv_phb *phb = pdn->phb->private_data;
 	u32 bdfn = (pdn->busno << 8) | pdn->devfn;
 
-	cfg_dbg("%s: bus: %x devfn: %x +%x/%x -> %08x\n",
-		pdn->busno, pdn->devfn, where, size, val);
+	pr_devel("%s: bus: %x devfn: %x +%x/%x -> %08x\n",
+		 __func__, pdn->busno, pdn->devfn, where, size, val);
 	switch (size) {
 	case 1:
 		opal_pci_config_write_byte(phb->opal_id, bdfn, where, val);
-- 
2.5.0.rc3

Re: [kernel,v2] powerpc/powernv: Fix debug macro

From: Michael Ellerman <mpe@ellerman.id.au>
Date: 2016-05-04 22:40:27

On Mon, 2016-02-05 at 07:06:12 UTC, Alexey Kardashevskiy wrote:
When cfg_dbg() is enabled (i.e. mapped to printk()), gcc produces
errors as the __func__ parameter is missing (pnv_pci_cfg_read() has one);
this adds the missing parameter. Since cfg_dbg() is used not just for
config space access, this replaces it with well-known pr_devel().

Signed-off-by: Alexey Kardashevskiy <redacted>
Applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/4caa4422e1de66eda7abf91153

cheers
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help