On Tue, May 17, 2016 at 07:22AM, Scott Wood wrote:

-----Original Message-----
From: Scott Wood [mailto:oss@buserror.net]
Sent: Tuesday, May 17, 2016 7:22 AM
To: Qiang Zhao <qiang.zhao@nxp.com>
Cc: robh+dt@kernel.org; devicetree@vger.kernel.org; linux-
kernel@vger.kernel.org; Xiaobo Xie [off-list ref]; Yang-Leo Li
[off-list ref]; linuxppc-dev@lists.ozlabs.org
Subject: Re: [v5,1/7] QE: Add IC, SI and SIRAM document to device tree
bindings.
=20
On Wed, Mar 09, 2016 at 09:21:28AM +0800, Zhao Qiang wrote:

quoted

Add IC, SI and SIRAM document of QE to
Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
---
changes for v2
	- Add interrupt-controller in Required properties
	- delete address-cells and size-cells for qe-si and qe-siram Changes
for v3
	- Add SoC specific caompatible strings to qe-si and qe-siram Changes
for v4
	- NA
Changes for v5
	- NA

 .../devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt  | 50
++++++++++++++++++++++
 1 file changed, 50 insertions(+)
+* Serial Interface Block (SI)
+
+The SI manages the routing of eight TDM lines to the QE block serial
+drivers , the MCC and the UCCs, for receive and transmit.
+
+Required properties:
+- compatible : should be "fsl,t1040-qe-si".
+- reg : Address range of SI register set.

=20
Is t1040 the only chip that has or will ever have this?

There also be t1024 and ls1043 supporting si.
I thought to add them when adding their device node.
If you think it is better to add them now, I will modify.

-Zhao Qiang