# Re: \[V2, 68/68\] powerpc/mm/radix: Use firmware feature to disable radix

- From: Michael Ellerman \<mpe@ellerman.id.au\>
- Date: 2016-04-20 02:59:54 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2016/04/9489464
- Thread: https://ratatoskr.run/linuxppc-dev/2016/04/9489240/t/2.md

```text
On Sat, 2016-09-04 at 06:14:04 UTC, "Aneesh Kumar K.V" wrote:
> We can depend on ibm,pa-features to enable/disable radix. This gives us
> a nice way to test p9 hash config, by changing device tree property.

I think we might want to be more careful here.

You set MMU_FTR_RADIX in the cputable entry. So it's on by default on P9 cpus.

Then if there is an ibm,pa-features property *and* it is >= 41 bytes long, the
below feature entry will hit. In that case the firmware controls whether it's on
or off.

I think it would be clearer if we removed RADIX from the cputable, and the below
became the only way to turn it on. Would that break anything?

> diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
> index 7030b035905d..a4d1f44364b8 100644
> --- a/arch/powerpc/kernel/prom.c
> +++ b/arch/powerpc/kernel/prom.c
> @@ -165,6 +165,7 @@ static struct ibm_pa_feature {
>  	 * which is 0 if the kernel doesn't support TM.
>  	 */
>  	{CPU_FTR_TM_COMP, 0, 0,		22, 0, 0},
> +	{0, MMU_FTR_RADIX, 0,		40, 0, 0},

So that says bit 0 of byte 40 enables MMU_FTR_RADIX. Where is that documented?

cheers
```
