[PATCH] cpufreq: qoriq: Register cooling device based on device tree

Register the qoriq cpufreq driver as a cooling device, based on the
thermal device tree framework. When temperature crosses the passive trip
point cpufreq is used to throttle CPUs.

Signed-off-by: Jia Hongtao <redacted>
Reviewed-by: Scott Wood <redacted>
---
This patch depends on following patches from Scott Wood:
http://patchwork.ozlabs.org/patch/519803/
http://patchwork.ozlabs.org/patch/519804/

 drivers/cpufreq/qoriq-cpufreq.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c
index 4f53fa2..cb1bc3c 100644
--- a/drivers/cpufreq/qoriq-cpufreq.c
+++ b/drivers/cpufreq/qoriq-cpufreq.c

@@ -12,6 +12,7 @@
 
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/kernel.h>

@@ -33,6 +34,7 @@
 struct cpu_data {
 	struct clk **pclk;
 	struct cpufreq_frequency_table *table;
+	struct thermal_cooling_device *cdev;
 };
 
 /*

@@ -292,7 +294,11 @@ static const struct of_device_id node_matches[] __initconst = {
 static int __init qoriq_cpufreq_init(void)
 {
 	int ret;
-	struct device_node  *np;
+	struct device_node *np;
+	struct device_node *cpu_np;
+	unsigned int cpu_id;
+	struct cpufreq_policy cpu_policy;
+	struct cpu_data *cpud;
 	const struct of_device_id *match;
 	const struct soc_data *data;
 

@@ -309,6 +315,22 @@ static int __init qoriq_cpufreq_init(void)
 		return -ENODEV;
 
 	ret = cpufreq_register_driver(&qoriq_cpufreq_driver);
+
+	/* Register CPU cooling device for QorIQ platform */
+	for_each_node_with_property(cpu_np, "#cooling-cells") {
+		of_property_read_u32(cpu_np, "reg", &cpu_id);
+		cpufreq_get_policy(&cpu_policy, cpu_id);
+
+		cpud = cpu_policy.driver_data;
+		cpud->cdev = of_cpufreq_cooling_register(cpu_np,
+						cpu_policy.related_cpus);
+		if (IS_ERR(cpud->cdev) && ERR_PTR(cpud->cdev) != -ENOSYS)
+			pr_err("Failed to register cooling device cpu%d: %ld\n",
+			       cpu_id, PTR_ERR(cpud->cdev));
+	}
+
+	of_node_put(cpu_np);
+
 	if (!ret)
 		pr_info("Freescale QorIQ CPU frequency scaling driver\n");
 

-- 
2.1.0.27.g96db324

On 24-11-15, 14:55, Jia Hongtao wrote:

+	/* Register CPU cooling device for QorIQ platform */
+	for_each_node_with_property(cpu_np, "#cooling-cells") {
+		of_property_read_u32(cpu_np, "reg", &cpu_id);
+		cpufreq_get_policy(&cpu_policy, cpu_id);

That's not the right way to do it. You already have DT node for the
CPU, look at how it is done from ->ready() callback for cpufreq-dt.

-- 
viresh

On Tue, 2015-11-24 at 14:55 +0800, Jia Hongtao wrote:

Register the qoriq cpufreq driver as a cooling device, based on the
thermal device tree framework. When temperature crosses the passive trip
point cpufreq is used to throttle CPUs.

Signed-off-by: Jia Hongtao <redacted>
Reviewed-by: Scott Wood <redacted>

When did I add "Reviewed-by" to this?

-Scott

-----Original Message-----
From: Viresh Kumar [mailto:viresh.kumar@linaro.org]
Sent: Tuesday, November 24, 2015 3:11 PM
To: Jia Hongtao-B38951
Cc: edubezval@gmail.com; linux-pm@vger.kernel.org; linuxppc-
dev@lists.ozlabs.org; devicetree@vger.kernel.org; Wood Scott-B07421
Subject: Re: [PATCH] cpufreq: qoriq: Register cooling device based on
device tree
=20
On 24-11-15, 14:55, Jia Hongtao wrote:

quoted

+	/* Register CPU cooling device for QorIQ platform */
+	for_each_node_with_property(cpu_np, "#cooling-cells") {
+		of_property_read_u32(cpu_np, "reg", &cpu_id);
+		cpufreq_get_policy(&cpu_policy, cpu_id);

=20
That's not the right way to do it. You already have DT node for the CPU,
look at how it is done from ->ready() callback for cpufreq-dt.
=20
--
viresh

Thanks.

I made a new patch to use ->ready callback for cpu cooling registration.
I will send V2 after test.

-Hongtao.