[PATCH 1/2] powerpc/fsl: Add PCI node in device tree of bsc9132qds
From: Zhiqiang Hou <hidden>
Date: 2015-10-13 11:29:20
Also in:
linux-devicetree
Subsystem:
linux for powerpc (32-bit and 64-bit), the rest · Maintainers:
Madhavan Srinivasan, Linus Torvalds
From: Harninder Rai <redacted> Signed-off-by: Harninder Rai <redacted> Signed-off-by: Minghuan Lian <redacted> Change-Id: I4355add4a92d1fcf514843aea5ecadd2e2517969 Reviewed-on: http://git.am.freescale.net:8181/2454 Reviewed-by: Zang Tiefei-R61911 <redacted> Reviewed-by: Kushwaha Prabhakar-B32579 <redacted> Reviewed-by: Fleming Andrew-AFLEMING <redacted> Tested-by: Fleming Andrew-AFLEMING <redacted> --- arch/powerpc/boot/dts/bsc9132qds.dts | 15 ++++++++++++++ arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi | 29 +++++++++++++++++++++++++++ arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi | 1 + 3 files changed, 45 insertions(+)
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts b/arch/powerpc/boot/dts/bsc9132qds.dts
index 6cab106..940d719 100644
--- a/arch/powerpc/boot/dts/bsc9132qds.dts
+++ b/arch/powerpc/boot/dts/bsc9132qds.dts@@ -29,6 +29,21 @@ soc: soc@ff700000 { ranges = <0x0 0x0 0xff700000 0x100000>; }; + + pci0: pcie@ff70a000 { + reg = <0 0xff70a000 0 0x1000>; + ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xc0010000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x90000000 + 0x2000000 0x0 0x90000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; }; /include/ "bsc9132qds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
index c723071..78c8f1c 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi@@ -40,6 +40,35 @@ interrupts = <16 2 0 0 20 2 0 0>; }; +/* controller at 0xa000 */ +&pci0 { + compatible = "fsl,bsc9132-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x2 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x2 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x2 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x2 0x0 0x0 + >; + }; +}; + &soc { #address-cells = <1>; #size-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
index 301a9db..90f7949 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi@@ -45,6 +45,7 @@ serial0 = &serial0; ethernet0 = &enet0; ethernet1 = &enet1; + pci0 = &pci0; }; cpus {
--
2.1.0.27.g96db324