[PATCH 1/3] doc: dt: net: Add fsl,wake-on-filer for eTSEC
From: Claudiu Manoil <hidden>
Date: 2015-10-01 10:14:35
Also in:
linux-devicetree, lkml
Subsystem:
freescale etsec ethernet driver (gianfar), networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Claudiu Manoil, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add the "fsl,wake-on-filer" property for eTSEC nodes to indicate that the system has the power management infrastructure needed to be able to wake up the system via FGPI (filer, aka. h/w rx parser) interrupt. Cc: Li Yang <redacted> Cc: Zhao Chenhui <redacted> Signed-off-by: Claudiu Manoil <redacted> --- Documentation/devicetree/bindings/net/fsl-tsec-phy.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
index 1e97532..db74f0d 100644
--- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt@@ -57,6 +57,10 @@ Properties: "rgmii-id", as all other connection types are detected by hardware. - fsl,magic-packet : If present, indicates that the hardware supports waking up via magic packet. + - fsl,wake-on-filer : If present, indicates that the hardware supports + waking up by Filer General Purpose Interrupt (FGPI) asserted on the + Rx int line. This is an advanced power management capability allowing + certain packet types (user) defined by filer rules to wake up the system. - bd-stash : If present, indicates that the hardware supports stashing buffer descriptors in the L2. - rx-stash-len : Denotes the number of bytes of a received buffer to stash
--
1.7.11.7