[PATCH] cxl: Fix unbalanced pci_dev_get in cxl_probe

Currently the first thing we do in cxl_probe is to grab a reference
on the pci device. Later on, we call device_register on our adapter,
which also holds the PCI device.

In our remove path, we call device_unregister, but we never call
pci_dev_put. We therefore leak the device every time we do a
reflash.

device_register/unregister is sufficient to hold the reference.
Drop the call to pci_dev_get.

Fixes: f204e0b8cedd ("cxl: Driver code for powernv PCIe based cards for userspace access")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Axtens <redacted>

---

This is the cxl bug that caused me to catch this a few weeks back:
e642d11bdbfe ("powerpc/eeh: Probe after unbalanced kref check")

I put an printk in the unbalanced kref path and confirmed that it
was printed with the pci_dev_get in and went away with the
pci_dev_get out.
---
 drivers/misc/cxl/pci.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 02c85160bfe9..a5e977192b61 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c

@@ -1249,8 +1249,6 @@ static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	int slice;
 	int rc;
 
-	pci_dev_get(dev);
-
 	if (cxl_verbose)
 		dump_cxl_config_space(dev);
 

-- 
2.5.0

mpe asked me to clarify that this was correct. Turns out it's not.

Currently, cxl_probe(pdev):
 1) calls pci_dev_get(pdev)
 2) calls cxl_adapter_init
    a) init calls cxl_adapter_alloc, which creates a struct cxl, 
       conventionally called adapter. This struct contains a 
       device entry, adapter->dev.

    b) init calls cxl_configure_adapter, where we set 
       adapter->dev.parent = &dev->dev (here dev is the pci dev)

So at this point, the cxl adapter's device's parent is the pci device
that I want to be refcounted.

    c) init calls cxl_register_adapter (which inexplicably is in file.c)

       *) cxl_register_adapter calls device_register(&adapter->dev) 

So now we're in device_register, where dev is the adapter device, and we
want to know if the PCI device is safe after we return.

device_register(&adapter->dev) calls device_initialize() and then
device_add().

device_add() does a get_device(). That ends up being a kobject_get() on
the adapter device kobj, which will increment the kref on the adapter
device. The PCI device doesn't get it's kref incremented explicitly.

It looks like we're not protected against that disappearing randomly.

So thanks, mpe, that was a good catch. I'll do a v2 that keeps the get
and adds a matching put.

Regards,
Daniel

On Wed, 2015-09-09 at 15:17 +1000, Daniel Axtens wrote:

-- 
Regards,
Daniel

Ahaha so I was wrong, device_add does grab a reference. 

Currently, cxl_probe(pdev):
 1) calls pci_dev_get(pdev)
 2) calls cxl_adapter_init
    a) init calls cxl_adapter_alloc, which creates a struct cxl, 
       conventionally called adapter. This struct contains a 
       device entry, adapter->dev.

    b) init calls cxl_configure_adapter, where we set 
       adapter->dev.parent = &dev->dev (here dev is the pci dev)

So at this point, the cxl adapter's device's parent is the pci device
that I want to be refcounted.

    c) init calls cxl_register_adapter (which inexplicably is in file.c)

       *) cxl_register_adapter calls device_register(&adapter->dev) 

So now we're in device_register, where dev is the adapter device, and we
want to know if the PCI device is safe after we return.

device_register(&adapter->dev) calls device_initialize() and then
device_add().

device_add() does a get_device(). That ends up being a kobject_get() on
the adapter device kobj, which will increment the kref on the adapter
device. 

I was right up to this point, but I didn't read enough of device_add.

device_add explicitly grabs the device's parent, and calls get_device on
it:

         parent = get_device(dev->parent);

So it turns out we *are* protected against the device disappearing, my
patch is correct and I don't need a v2.

Thanks to Ian for making me recheck device_add :)

Regards,
Daniel

The PCI device doesn't get it's kref incremented explicitly.

It looks like we're not protected against that disappearing randomly.

So thanks, mpe, that was a good catch. I'll do a v2 that keeps the get
and adds a matching put.

Regards,
Daniel

On Wed, 2015-09-09 at 15:17 +1000, Daniel Axtens wrote:

quoted

Currently the first thing we do in cxl_probe is to grab a reference
on the pci device. Later on, we call device_register on our adapter,
which also holds the PCI device.

In our remove path, we call device_unregister, but we never call
pci_dev_put. We therefore leak the device every time we do a
reflash.

device_register/unregister is sufficient to hold the reference.
Drop the call to pci_dev_get.

Fixes: f204e0b8cedd ("cxl: Driver code for powernv PCIe based cards for userspace access")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Axtens <redacted>

---

This is the cxl bug that caused me to catch this a few weeks back:
e642d11bdbfe ("powerpc/eeh: Probe after unbalanced kref check")

I put an printk in the unbalanced kref path and confirmed that it
was printed with the pci_dev_get in and went away with the
pci_dev_get out.
---
 drivers/misc/cxl/pci.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 02c85160bfe9..a5e977192b61 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c

@@ -1249,8 +1249,6 @@ static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	int slice;
 	int rc;
 
-	pci_dev_get(dev);
-
 	if (cxl_verbose)
 		dump_cxl_config_space(dev);
 

-- 
Regards,
Daniel

Thanks Daniel :)

Acked-by: Ian Munsie <redacted>

On Wed, 2015-09-09 at 16:56 +1000, Daniel Axtens wrote:

Ahaha so I was wrong, device_add does grab a reference. 

quoted

Currently, cxl_probe(pdev):
 1) calls pci_dev_get(pdev)
 2) calls cxl_adapter_init
    a) init calls cxl_adapter_alloc, which creates a struct cxl, 
       conventionally called adapter. This struct contains a 
       device entry, adapter->dev.

    b) init calls cxl_configure_adapter, where we set 
       adapter->dev.parent = &dev->dev (here dev is the pci dev)

So at this point, the cxl adapter's device's parent is the pci device
that I want to be refcounted.

    c) init calls cxl_register_adapter (which inexplicably is in file.c)

       *) cxl_register_adapter calls device_register(&adapter->dev) 

So now we're in device_register, where dev is the adapter device, and we
want to know if the PCI device is safe after we return.

device_register(&adapter->dev) calls device_initialize() and then
device_add().

device_add() does a get_device(). That ends up being a kobject_get() on
the adapter device kobj, which will increment the kref on the adapter
device. 

I was right up to this point, but I didn't read enough of device_add.

device_add explicitly grabs the device's parent, and calls get_device on
it:

         parent = get_device(dev->parent);

So it turns out we *are* protected against the device disappearing, my
patch is correct and I don't need a v2.

Thanks to Ian for making me recheck device_add :)

Thanks for digging into it.

Do you mind massaging that explanation into something I can put into the
changelog?

cheers