[PATCH] powerpc/p1010rdb:update dts for pcie interrupt-map
From: Zhao Qiang <hidden>
Date: 2015-07-20 07:32:19
Also in:
linux-devicetree
Subsystem:
linux for powerpc (32-bit and 64-bit), the rest · Maintainers:
Madhavan Srinivasan, Michael Ellerman, Linus Torvalds
From: Zhao Qiang <redacted> p1010rdb-pb use the irq[4:5] for inta and intb to pcie, it is active-high, so set it. Signed-off-by: Zhao Qiang <redacted> Change-Id: I29db41b4a8b5a67c18151099884edda6de4d9d1a Reviewed-on: http://git.am.freescale.net:8181/9915 Tested-by: Review Code-CDREVIEW <redacted> Reviewed-by: Xiaobo Xie <redacted> Reviewed-by: Jose Rivera <redacted> --- arch/powerpc/boot/dts/fsl/p1010si-post.dtsi | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
index 1804ed7..4313ff6 100644
--- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi@@ -59,8 +59,12 @@ interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x0 */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 - 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + /* + *irq[4:5] only for PCIe in dts, set to active-high + *irq[6:7] is pulled up on board, set to active-low + */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 >;
--
2.1.0.27.g96db324