[PATCH] macintosh/ans-lcd: fix build failure after module_init/exit relocation

After commit 0fd972a7d91d ("module: relocate module_init from init.h to module.h")
ans-lcd module fails to build with:

drivers/macintosh/ans-lcd.c:201:1: warning: data definition has no type or storage class [enabled by default]
 module_init(anslcd_init);
 ^
drivers/macintosh/ans-lcd.c:201:1: error: type defaults to 'int' in declaration of 'module_init' [-Werror=implicit-int]
drivers/macintosh/ans-lcd.c:201:1: warning: parameter names (without types) in function declaration [enabled by default]
drivers/macintosh/ans-lcd.c:202:1: warning: data definition has no type or storage class [enabled by default]
 module_exit(anslcd_exit);
 ^
drivers/macintosh/ans-lcd.c:202:1: error: type defaults to 'int' in declaration of 'module_exit' [-Werror=implicit-int]
drivers/macintosh/ans-lcd.c:202:1: warning: parameter names (without types) in function declaration [enabled by default]
drivers/macintosh/ans-lcd.c:155:1: warning: 'anslcd_init' defined but not used [-Wunused-function]
 anslcd_init(void)
 ^
drivers/macintosh/ans-lcd.c:195:1: warning: 'anslcd_exit' defined but not used [-Wunused-function]
 anslcd_exit(void)
 ^

This commit fixes it by replacing linux/init.h by linux/module.h.

Fixes: 0fd972a7d91d ("module: relocate module_init from init.h to module.h")
Signed-off-by: Luis Henriques <redacted>
---
 drivers/macintosh/ans-lcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/macintosh/ans-lcd.c b/drivers/macintosh/ans-lcd.c
index 1a57e88a38f7..cd35079c8c98 100644
--- a/drivers/macintosh/ans-lcd.c
+++ b/drivers/macintosh/ans-lcd.c

@@ -7,7 +7,7 @@
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/fcntl.h>
-#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/fs.h>
 

[[PATCH] macintosh/ans-lcd: fix build failure after module_init/exit relocation] On 17/07/2015 (Fri 14:20) Luis Henriques wrote:

After commit 0fd972a7d91d ("module: relocate module_init from init.h to module.h")
ans-lcd module fails to build with:

drivers/macintosh/ans-lcd.c:201:1: warning: data definition has no type or storage class [enabled by default]
 module_init(anslcd_init);
 ^
drivers/macintosh/ans-lcd.c:201:1: error: type defaults to 'int' in declaration of 'module_init' [-Werror=implicit-int]
drivers/macintosh/ans-lcd.c:201:1: warning: parameter names (without types) in function declaration [enabled by default]
drivers/macintosh/ans-lcd.c:202:1: warning: data definition has no type or storage class [enabled by default]
 module_exit(anslcd_exit);
 ^
drivers/macintosh/ans-lcd.c:202:1: error: type defaults to 'int' in declaration of 'module_exit' [-Werror=implicit-int]
drivers/macintosh/ans-lcd.c:202:1: warning: parameter names (without types) in function declaration [enabled by default]
drivers/macintosh/ans-lcd.c:155:1: warning: 'anslcd_init' defined but not used [-Wunused-function]
 anslcd_init(void)
 ^
drivers/macintosh/ans-lcd.c:195:1: warning: 'anslcd_exit' defined but not used [-Wunused-function]
 anslcd_exit(void)
 ^

This commit fixes it by replacing linux/init.h by linux/module.h.

Guess it was inevitable I miss at least one.   This old beast must not
get coverage under any of the ppc defconfigs or allmodconfig, since I
did both...  are you using a custom config for an older box?

Anyway, the thing is controlled by a tristate, so this is the right fix.

I don't have _any_ other fixes queued for that cleanup series, so I'm fine
with this going via the ppc tree, since I'm sure there will be pending
commits there.

Acked-by: Paul Gortmaker <redacted>

Thanks,
Paul.
--

On Sat, Jul 18, 2015 at 07:45:17PM -0400, Paul Gortmaker wrote:

[[PATCH] macintosh/ans-lcd: fix build failure after module_init/exit relocation] On 17/07/2015 (Fri 14:20) Luis Henriques wrote:

quoted

After commit 0fd972a7d91d ("module: relocate module_init from init.h to module.h")
ans-lcd module fails to build with:

drivers/macintosh/ans-lcd.c:201:1: warning: data definition has no type or storage class [enabled by default]
 module_init(anslcd_init);
 ^
drivers/macintosh/ans-lcd.c:201:1: error: type defaults to 'int' in declaration of 'module_init' [-Werror=implicit-int]
drivers/macintosh/ans-lcd.c:201:1: warning: parameter names (without types) in function declaration [enabled by default]
drivers/macintosh/ans-lcd.c:202:1: warning: data definition has no type or storage class [enabled by default]
 module_exit(anslcd_exit);
 ^
drivers/macintosh/ans-lcd.c:202:1: error: type defaults to 'int' in declaration of 'module_exit' [-Werror=implicit-int]
drivers/macintosh/ans-lcd.c:202:1: warning: parameter names (without types) in function declaration [enabled by default]
drivers/macintosh/ans-lcd.c:155:1: warning: 'anslcd_init' defined but not used [-Wunused-function]
 anslcd_init(void)
 ^
drivers/macintosh/ans-lcd.c:195:1: warning: 'anslcd_exit' defined but not used [-Wunused-function]
 anslcd_exit(void)
 ^

This commit fixes it by replacing linux/init.h by linux/module.h.

Guess it was inevitable I miss at least one.   This old beast must not
get coverage under any of the ppc defconfigs or allmodconfig, since I
did both...  are you using a custom config for an older box?

I was actually just using a Debian config, which has CONFIG_ANSLCD=m

Cheers,
--
Luís

Anyway, the thing is controlled by a tristate, so this is the right fix.

I don't have _any_ other fixes queued for that cleanup series, so I'm fine
with this going via the ppc tree, since I'm sure there will be pending
commits there.

Acked-by: Paul Gortmaker <redacted>

Thanks,
Paul.
--

quoted

Fixes: 0fd972a7d91d ("module: relocate module_init from init.h to module.h")
Signed-off-by: Luis Henriques <redacted>
---
 drivers/macintosh/ans-lcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/macintosh/ans-lcd.c b/drivers/macintosh/ans-lcd.c
index 1a57e88a38f7..cd35079c8c98 100644
--- a/drivers/macintosh/ans-lcd.c
+++ b/drivers/macintosh/ans-lcd.c

@@ -7,7 +7,7 @@
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/fcntl.h>
-#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/fs.h>
 

On Fri, 2015-17-07 at 13:20:31 UTC, Luis Henriques wrote:

After commit 0fd972a7d91d ("module: relocate module_init from init.h to module.h")
ans-lcd module fails to build with:

drivers/macintosh/ans-lcd.c:201:1: warning: data definition has no type or storage class [enabled by default]
 module_init(anslcd_init);
 ^
drivers/macintosh/ans-lcd.c:201:1: error: type defaults to 'int' in declaration of 'module_init' [-Werror=implicit-int]
drivers/macintosh/ans-lcd.c:201:1: warning: parameter names (without types) in function declaration [enabled by default]
drivers/macintosh/ans-lcd.c:202:1: warning: data definition has no type or storage class [enabled by default]
 module_exit(anslcd_exit);
 ^
drivers/macintosh/ans-lcd.c:202:1: error: type defaults to 'int' in declaration of 'module_exit' [-Werror=implicit-int]
drivers/macintosh/ans-lcd.c:202:1: warning: parameter names (without types) in function declaration [enabled by default]
drivers/macintosh/ans-lcd.c:155:1: warning: 'anslcd_init' defined but not used [-Wunused-function]
 anslcd_init(void)
 ^
drivers/macintosh/ans-lcd.c:195:1: warning: 'anslcd_exit' defined but not used [-Wunused-function]
 anslcd_exit(void)
 ^

This commit fixes it by replacing linux/init.h by linux/module.h.

Fixes: 0fd972a7d91d ("module: relocate module_init from init.h to module.h")
Signed-off-by: Luis Henriques <redacted>
Acked-by: Paul Gortmaker <redacted>

Applied to powerpc fixes, thanks.

https://git.kernel.org/powerpc/c/120d200a86273d1840d0

cheers