[PATCH] pseries/iommu: remove iommu device references via bus notifier

Subsystems: linux for powerpc (32-bit and 64-bit), the rest

STALE4187d

8 messages, 3 authors, 2015-02-24 · open the first message on its own page

[PATCH] pseries/iommu: remove iommu device references via bus notifier

From: Nishanth Aravamudan <hidden>
Date: 2015-02-19 18:41:12

After d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier"), the
refcnt on the kobject backing the IOMMU group for a PCI device is
elevated by each call to pci_dma_dev_setup_pSeriesLP() (via
set_iommu_table_base_and_group). When we go to dlpar a multi-function
PCI device out:

	iommu_reconfig_notifier ->
		iommu_free_table ->
			iommu_group_put
			BUG_ON(tbl->it_group)

We trip this BUG_ON, because there are still references on the table, so
it is not freed. Fix this by also adding a bus notifier identical to
PowerNV for pSeries. Tested a remove -> add -> remove cycle without
issue where it always hit the BUG_ON without the changes.

Fixes: d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier")
Signed-off-by: Nishanth Aravamudan <redacted>
Cc: stable@kernel.org (3.13+)

diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 1d3d52dc3ff3..f77fb02f4710 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c

@@ -1340,3 +1340,31 @@ static int __init disable_multitce(char *str)
 }
 
 __setup("multitce=", disable_multitce);
+
+static int tce_iommu_bus_notifier(struct notifier_block *nb,
+                unsigned long action, void *data)
+{
+        struct device *dev = data;
+
+        switch (action) {
+        case BUS_NOTIFY_ADD_DEVICE:
+                return iommu_add_device(dev);
+        case BUS_NOTIFY_DEL_DEVICE:
+                if (dev->iommu_group)
+                        iommu_del_device(dev);
+                return 0;
+        default:
+                return 0;
+        }
+}
+
+static struct notifier_block tce_iommu_bus_nb = {
+        .notifier_call = tce_iommu_bus_notifier,
+};
+
+static int __init tce_iommu_bus_notifier_init(void)
+{
+        bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb);
+        return 0;
+}
+machine_subsys_initcall_sync(pseries, tce_iommu_bus_notifier_init);

Re: [PATCH] pseries/iommu: remove iommu device references via bus notifier

From: Alexey Kardashevskiy <hidden>
Date: 2015-02-20 01:18:54

On 02/20/2015 05:41 AM, Nishanth Aravamudan wrote:

After d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier"), the
refcnt on the kobject backing the IOMMU group for a PCI device is
elevated by each call to pci_dma_dev_setup_pSeriesLP() (via
set_iommu_table_base_and_group). When we go to dlpar a multi-function
PCI device out:

	iommu_reconfig_notifier ->
		iommu_free_table ->
			iommu_group_put
			BUG_ON(tbl->it_group)

We trip this BUG_ON, because there are still references on the table, so
it is not freed. Fix this by also adding a bus notifier identical to
PowerNV for pSeries. Tested a remove -> add -> remove cycle without
issue where it always hit the BUG_ON without the changes.

Fixes: d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier")
Signed-off-by: Nishanth Aravamudan <redacted>
Cc: stable@kernel.org (3.13+)

Reviewed-by: Alexey Kardashevskiy <redacted>

quoted hunk

diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 1d3d52dc3ff3..f77fb02f4710 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c

@@ -1340,3 +1340,31 @@ static int __init disable_multitce(char *str)
  }

  __setup("multitce=", disable_multitce);
+
+static int tce_iommu_bus_notifier(struct notifier_block *nb,
+                unsigned long action, void *data)
+{
+        struct device *dev = data;
+
+        switch (action) {
+        case BUS_NOTIFY_ADD_DEVICE:
+                return iommu_add_device(dev);
+        case BUS_NOTIFY_DEL_DEVICE:
+                if (dev->iommu_group)
+                        iommu_del_device(dev);
+                return 0;
+        default:
+                return 0;
+        }
+}
+
+static struct notifier_block tce_iommu_bus_nb = {
+        .notifier_call = tce_iommu_bus_notifier,
+};
+
+static int __init tce_iommu_bus_notifier_init(void)
+{
+        bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb);
+        return 0;
+}
+machine_subsys_initcall_sync(pseries, tce_iommu_bus_notifier_init);


-- 
Alexey Kardashevskiy
IBM OzLabs, LTC Team

e-mail: aik@au1.ibm.com
notes: Alexey Kardashevskiy/Australia/IBM

Re: [PATCH] pseries/iommu: remove iommu device references via bus notifier

From: Michael Ellerman <mpe@ellerman.id.au>
Date: 2015-02-20 04:31:30

On Thu, 2015-02-19 at 10:41 -0800, Nishanth Aravamudan wrote:

After d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier"), the
refcnt on the kobject backing the IOMMU group for a PCI device is
elevated by each call to pci_dma_dev_setup_pSeriesLP() (via
set_iommu_table_base_and_group). When we go to dlpar a multi-function
PCI device out:

	iommu_reconfig_notifier ->
		iommu_free_table ->
			iommu_group_put
			BUG_ON(tbl->it_group)

We trip this BUG_ON, because there are still references on the table, so
it is not freed. Fix this by also adding a bus notifier identical to
PowerNV for pSeries.

Please put it somewhere common, arch/powerpc/kernel/iommu.c perhaps, and just
add a second machine_init_call() for pseries.

cheers

[PATCH v2] pseries/iommu: remove iommu device references via bus notifier

From: Nishanth Aravamudan <hidden>
Date: 2015-02-21 19:00:59

On 20.02.2015 [15:31:29 +1100], Michael Ellerman wrote:

On Thu, 2015-02-19 at 10:41 -0800, Nishanth Aravamudan wrote:

quoted

After d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier"), the
refcnt on the kobject backing the IOMMU group for a PCI device is
elevated by each call to pci_dma_dev_setup_pSeriesLP() (via
set_iommu_table_base_and_group). When we go to dlpar a multi-function
PCI device out:

	iommu_reconfig_notifier ->
		iommu_free_table ->
			iommu_group_put
			BUG_ON(tbl->it_group)

We trip this BUG_ON, because there are still references on the table, so
it is not freed. Fix this by also adding a bus notifier identical to
PowerNV for pSeries.

Please put it somewhere common, arch/powerpc/kernel/iommu.c perhaps, and just
add a second machine_init_call() for pseries.

How does this look? Only compile-tested with CONFIG_IOMMU_API on/off so
far, waiting for access to the test LPAR (should have it on Monday).


After d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier"), the
refcnt on the kobject backing the IOMMU group for a PCI device is
elevated by each call to pci_dma_dev_setup_pSeriesLP() (via
set_iommu_table_base_and_group). When we go to dlpar a multi-function
PCI device out:

        iommu_reconfig_notifier ->
                iommu_free_table ->
                        iommu_group_put
                        BUG_ON(tbl->it_group)

We trip this BUG_ON, because there are still references on the table, so
it is not freed. Fix this by moving the PowerNV bus notifier to common
code and calling it for both PowerNV and pSeries.

Fixes: d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier")
Signed-off-by: Nishanth Aravamudan <redacted>
Cc: stable@kernel.org (3.13+)

---
v1 -> v2:
  Move powernv code to common file, just add machine_init_call for pseries.
  Suggested by Michael Ellerman.

Michael, I'll send another update once I have testing results.

diff -urpN linux-3.19/arch/powerpc/include/asm/iommu.h linux-3.19-dev/arch/powerpc/include/asm/iommu.h

--- linux-3.19/arch/powerpc/include/asm/iommu.h	2015-02-08 18:54:22.000000000 -0800
+++ linux-3.19-dev/arch/powerpc/include/asm/iommu.h	2015-02-21 09:03:55.960995053 -0800

@@ -113,6 +113,7 @@ extern void iommu_register_group(struct
 				 int pci_domain_number, unsigned long pe_num);
 extern int iommu_add_device(struct device *dev);
 extern void iommu_del_device(struct device *dev);
+extern int __init tce_iommu_bus_notifier_init(void);
 #else
 static inline void iommu_register_group(struct iommu_table *tbl,
 					int pci_domain_number,

@@ -128,6 +129,11 @@ static inline int iommu_add_device(struc
 static inline void iommu_del_device(struct device *dev)
 {
 }
+
+static inline int __init tce_iommu_bus_notifier_init(void) 
+{ 
+        return 0; 
+} 
 #endif /* !CONFIG_IOMMU_API */
 
 static inline void set_iommu_table_base_and_group(struct device *dev,

diff -urpN linux-3.19/arch/powerpc/kernel/iommu.c linux-3.19-dev/arch/powerpc/kernel/iommu.c

--- linux-3.19/arch/powerpc/kernel/iommu.c	2015-02-08 18:54:22.000000000 -0800
+++ linux-3.19-dev/arch/powerpc/kernel/iommu.c	2015-02-20 17:50:19.229927080 -0800

@@ -1175,4 +1175,30 @@ void iommu_del_device(struct device *dev
 }
 EXPORT_SYMBOL_GPL(iommu_del_device);
 
+static int tce_iommu_bus_notifier(struct notifier_block *nb,
+                unsigned long action, void *data)
+{
+        struct device *dev = data;
+
+        switch (action) {
+        case BUS_NOTIFY_ADD_DEVICE:
+                return iommu_add_device(dev);
+        case BUS_NOTIFY_DEL_DEVICE:
+                if (dev->iommu_group)
+                        iommu_del_device(dev);
+                return 0;
+        default:
+                return 0;
+        }
+}
+
+static struct notifier_block tce_iommu_bus_nb = {
+        .notifier_call = tce_iommu_bus_notifier,
+};
+
+int __init tce_iommu_bus_notifier_init(void)
+{
+        bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb);
+        return 0;
+}
 #endif /* CONFIG_IOMMU_API */

diff -urpN linux-3.19/arch/powerpc/platforms/powernv/pci.c linux-3.19-dev/arch/powerpc/platforms/powernv/pci.c

--- linux-3.19/arch/powerpc/platforms/powernv/pci.c	2015-02-08 18:54:22.000000000 -0800
+++ linux-3.19-dev/arch/powerpc/platforms/powernv/pci.c	2015-02-20 17:50:33.917927464 -0800

@@ -866,30 +866,4 @@ void __init pnv_pci_init(void)
 #endif
 }
 
-static int tce_iommu_bus_notifier(struct notifier_block *nb,
-		unsigned long action, void *data)
-{
-	struct device *dev = data;
-
-	switch (action) {
-	case BUS_NOTIFY_ADD_DEVICE:
-		return iommu_add_device(dev);
-	case BUS_NOTIFY_DEL_DEVICE:
-		if (dev->iommu_group)
-			iommu_del_device(dev);
-		return 0;
-	default:
-		return 0;
-	}
-}
-
-static struct notifier_block tce_iommu_bus_nb = {
-	.notifier_call = tce_iommu_bus_notifier,
-};
-
-static int __init tce_iommu_bus_notifier_init(void)
-{
-	bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb);
-	return 0;
-}
 machine_subsys_initcall_sync(powernv, tce_iommu_bus_notifier_init);

diff -urpN linux-3.19/arch/powerpc/platforms/pseries/iommu.c linux-3.19-dev/arch/powerpc/platforms/pseries/iommu.c

--- linux-3.19/arch/powerpc/platforms/pseries/iommu.c	2015-02-08 18:54:22.000000000 -0800
+++ linux-3.19-dev/arch/powerpc/platforms/pseries/iommu.c	2015-02-20 17:51:23.265928866 -0800

@@ -1340,3 +1340,5 @@ static int __init disable_multitce(char
 }
 
 __setup("multitce=", disable_multitce);
+
+machine_subsys_initcall_sync(pseries, tce_iommu_bus_notifier_init);

Re: [v2] pseries/iommu: remove iommu device references via bus notifier

From: Michael Ellerman <mpe@ellerman.id.au>
Date: 2015-02-23 02:27:24

On Sat, 2015-21-02 at 19:00:50 UTC, Nishanth Aravamudan wrote:

On 20.02.2015 [15:31:29 +1100], Michael Ellerman wrote:

quoted

On Thu, 2015-02-19 at 10:41 -0800, Nishanth Aravamudan wrote:

quoted

After d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier"), the
refcnt on the kobject backing the IOMMU group for a PCI device is
elevated by each call to pci_dma_dev_setup_pSeriesLP() (via
set_iommu_table_base_and_group). When we go to dlpar a multi-function
PCI device out:

	iommu_reconfig_notifier ->
		iommu_free_table ->
			iommu_group_put
			BUG_ON(tbl->it_group)

We trip this BUG_ON, because there are still references on the table, so
it is not freed. Fix this by also adding a bus notifier identical to
PowerNV for pSeries.

Please put it somewhere common, arch/powerpc/kernel/iommu.c perhaps, and just
add a second machine_init_call() for pseries.

How does this look? Only compile-tested with CONFIG_IOMMU_API on/off so
far, waiting for access to the test LPAR (should have it on Monday).

Yeah that looks better, thanks.

It probably doesn't build with CONFIG_PCI=n though, but I don't think
CONFIG_PCI=n builds anyway.

cheers

Re: [v2] pseries/iommu: remove iommu device references via bus notifier

From: Nishanth Aravamudan <hidden>
Date: 2015-02-23 18:55:34

On 23.02.2015 [13:27:24 +1100], Michael Ellerman wrote:

On Sat, 2015-21-02 at 19:00:50 UTC, Nishanth Aravamudan wrote:

quoted

On 20.02.2015 [15:31:29 +1100], Michael Ellerman wrote:

quoted

On Thu, 2015-02-19 at 10:41 -0800, Nishanth Aravamudan wrote:

quoted

After d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier"), the
refcnt on the kobject backing the IOMMU group for a PCI device is
elevated by each call to pci_dma_dev_setup_pSeriesLP() (via
set_iommu_table_base_and_group). When we go to dlpar a multi-function
PCI device out:

	iommu_reconfig_notifier ->
		iommu_free_table ->
			iommu_group_put
			BUG_ON(tbl->it_group)

We trip this BUG_ON, because there are still references on the table, so
it is not freed. Fix this by also adding a bus notifier identical to
PowerNV for pSeries.

Please put it somewhere common, arch/powerpc/kernel/iommu.c perhaps, and just
add a second machine_init_call() for pseries.

How does this look? Only compile-tested with CONFIG_IOMMU_API on/off so
far, waiting for access to the test LPAR (should have it on Monday).

Yeah that looks better, thanks.

It probably doesn't build with CONFIG_PCI=n though, but I don't think
CONFIG_PCI=n builds anyway.

Indeed it doesn't. Started looking at CONFIG_PCI=n and immediately hit
the following:

PCI_MSI depends on PCI

PCI can be manually turned off

PSERIES (and a bunch of other platforms) select PCI_MSI

So you end up with PCI_MSI on and PCI off and the build breaks.

Should the platforms depend on PCI_MSI instead?

Per the Documentation:
"        select should be used with care. select will force
        a symbol to a value without visiting the dependencies.
        By abusing select you are able to select a symbol FOO even
        if FOO depends on BAR that is not set."

Thanks,
Nish

Re: [PATCH v2] pseries/iommu: remove iommu device references via bus notifier

From: Nishanth Aravamudan <hidden>
Date: 2015-02-23 20:45:00

On 21.02.2015 [11:00:50 -0800], Nishanth Aravamudan wrote:

On 20.02.2015 [15:31:29 +1100], Michael Ellerman wrote:

quoted

On Thu, 2015-02-19 at 10:41 -0800, Nishanth Aravamudan wrote:

quoted

After d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier"), the
refcnt on the kobject backing the IOMMU group for a PCI device is
elevated by each call to pci_dma_dev_setup_pSeriesLP() (via
set_iommu_table_base_and_group). When we go to dlpar a multi-function
PCI device out:

	iommu_reconfig_notifier ->
		iommu_free_table ->
			iommu_group_put
			BUG_ON(tbl->it_group)

We trip this BUG_ON, because there are still references on the table, so
it is not freed. Fix this by also adding a bus notifier identical to
PowerNV for pSeries.

Please put it somewhere common, arch/powerpc/kernel/iommu.c perhaps, and just
add a second machine_init_call() for pseries.

How does this look? Only compile-tested with CONFIG_IOMMU_API on/off so
far, waiting for access to the test LPAR (should have it on Monday).


After d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier"), the
refcnt on the kobject backing the IOMMU group for a PCI device is
elevated by each call to pci_dma_dev_setup_pSeriesLP() (via
set_iommu_table_base_and_group). When we go to dlpar a multi-function
PCI device out:

        iommu_reconfig_notifier ->
                iommu_free_table ->
                        iommu_group_put
                        BUG_ON(tbl->it_group)

We trip this BUG_ON, because there are still references on the table, so
it is not freed. Fix this by moving the PowerNV bus notifier to common
code and calling it for both PowerNV and pSeries.

Survived a remove -> add -> remove cycle, which always resulted in the
BUG_ON without the change.

Fixes: d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier")
Signed-off-by: Nishanth Aravamudan <redacted>
Cc: stable@kernel.org (3.13+)

Tested-by: Nishanth Aravamudan <redacted>

Re: [v2] pseries/iommu: remove iommu device references via bus notifier

From: Michael Ellerman <mpe@ellerman.id.au>
Date: 2015-02-24 04:42:16

On Mon, 2015-02-23 at 10:54 -0800, Nishanth Aravamudan wrote:

On 23.02.2015 [13:27:24 +1100], Michael Ellerman wrote:

quoted

On Sat, 2015-21-02 at 19:00:50 UTC, Nishanth Aravamudan wrote:

quoted

On 20.02.2015 [15:31:29 +1100], Michael Ellerman wrote:

quoted

On Thu, 2015-02-19 at 10:41 -0800, Nishanth Aravamudan wrote:

quoted

After d905c5df9aef ("PPC: POWERNV: move iommu_add_device earlier"), the
refcnt on the kobject backing the IOMMU group for a PCI device is
elevated by each call to pci_dma_dev_setup_pSeriesLP() (via
set_iommu_table_base_and_group). When we go to dlpar a multi-function
PCI device out:

	iommu_reconfig_notifier ->
		iommu_free_table ->
			iommu_group_put
			BUG_ON(tbl->it_group)

We trip this BUG_ON, because there are still references on the table, so
it is not freed. Fix this by also adding a bus notifier identical to
PowerNV for pSeries.

Please put it somewhere common, arch/powerpc/kernel/iommu.c perhaps, and just
add a second machine_init_call() for pseries.

How does this look? Only compile-tested with CONFIG_IOMMU_API on/off so
far, waiting for access to the test LPAR (should have it on Monday).

Yeah that looks better, thanks.

It probably doesn't build with CONFIG_PCI=n though, but I don't think
CONFIG_PCI=n builds anyway.

Indeed it doesn't. Started looking at CONFIG_PCI=n and immediately hit
the following:

PCI_MSI depends on PCI

PCI can be manually turned off

PSERIES (and a bunch of other platforms) select PCI_MSI

So you end up with PCI_MSI on and PCI off and the build breaks.

Should the platforms depend on PCI_MSI instead?

No, they don't depend on it, they would just like it if PCI is enabled.

That can be fixed fairly easily by making it:

config PSERIES
	select PCI_MSI if PCI


But you then discover that there are ten other places where the build breaks
for PCI=n.

I'm starting to think we should just force PCI on for PSERIES and be done with
it, we could all spend less of our time chasing build breaks for configurations
no one actually cares about in practice (ie. PSERIES=y PCI=n).

cheers

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help