[PATCH v2 1/2] powerpc/powernv: Separate...

[PATCH v2 1/2] powerpc/powernv: Separate function for OPAL IRQ setup

From: Gavin Shan <hidden>
Date: 2015-01-23 03:26:09

The patch put the OPAL interrupt setup logic in opal_init() into
seperate function opal_irq_init() for easier code maintaining. The
patch doesn't introduce logic changes except:

   * Rename variable names.
   * Release virtual IRQ upon error from request_irq().
   * Don't cache the virtual IRQ to opal_irqs[] upon error from
     request_irq().

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Gavin Shan <redacted>
---
 arch/powerpc/platforms/powernv/opal.c | 61 +++++++++++++++++++++++------------
 1 file changed, 41 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index f10b9ec..411975c 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c

@@ -695,11 +695,49 @@ static void opal_i2c_create_devs(void)
 		of_platform_device_create(np, NULL, NULL);
 }
 
+static void __init opal_irq_init(struct device_node *dn)
+{
+	const __be32 *irqs;
+	int i, irqlen;
+
+	/* Get interrupt property */
+	irqs = of_get_property(opal_node, "opal-interrupts", &irqlen);
+	pr_debug("opal: Found %d interrupts reserved for OPAL\n",
+		 irqs ? (irqlen / 4) : 0);
+
+	/* Install interrupt handlers */
+	opal_irq_count = irqlen / 4;
+	opal_irqs = kzalloc(opal_irq_count * sizeof(unsigned int), GFP_KERNEL);
+	for (i = 0; irqs && i < opal_irq_count; i++, irqs++) {
+		unsigned int irq, virq;
+		int rc;
+
+		/* Get hardware and virtual IRQ */
+		irq = be32_to_cpup(irqs);
+		virq = irq_create_mapping(NULL, irq);
+		if (virq == NO_IRQ) {
+			pr_warn("opal: Failed to map irq 0x%x\n", irq);
+			continue;
+		}
+
+		/* Install interrupt handler */
+		rc = request_irq(virq, opal_interrupt, 0, "opal", NULL);
+		if (rc) {
+			irq_dispose_mapping(virq);
+			pr_warn("opal: Error %d requesting irq %d"
+				" (0x%x)\n", rc, virq, irq);
+			continue;
+		}
+
+		/* Cache IRQ */
+		opal_irqs[i] = virq;
+	}
+}
+
 static int __init opal_init(void)
 {
 	struct device_node *np, *consoles;
-	const __be32 *irqs;
-	int rc, i, irqlen;
+	int rc;
 
 	opal_node = of_find_node_by_path("/ibm,opal");
 	if (!opal_node) {

@@ -725,24 +763,7 @@ static int __init opal_init(void)
 	opal_i2c_create_devs();
 
 	/* Find all OPAL interrupts and request them */
-	irqs = of_get_property(opal_node, "opal-interrupts", &irqlen);
-	pr_debug("opal: Found %d interrupts reserved for OPAL\n",
-		 irqs ? (irqlen / 4) : 0);
-	opal_irq_count = irqlen / 4;
-	opal_irqs = kzalloc(opal_irq_count * sizeof(unsigned int), GFP_KERNEL);
-	for (i = 0; irqs && i < (irqlen / 4); i++, irqs++) {
-		unsigned int hwirq = be32_to_cpup(irqs);
-		unsigned int irq = irq_create_mapping(NULL, hwirq);
-		if (irq == NO_IRQ) {
-			pr_warning("opal: Failed to map irq 0x%x\n", hwirq);
-			continue;
-		}
-		rc = request_irq(irq, opal_interrupt, 0, "opal", NULL);
-		if (rc)
-			pr_warning("opal: Error %d requesting irq %d"
-				   " (0x%x)\n", rc, irq, hwirq);
-		opal_irqs[i] = irq;
-	}
+	opal_irq_init(opal_node);
 
 	/* Create "opal" kobject under /sys/firmware */
 	rc = opal_sysfs_init();

-- 
1.8.3.2

[PATCH v2 2/2] powerpc/powernv: Don't alloc IRQ map if necessary

From: Gavin Shan <hidden>
Date: 2015-01-23 03:26:09

On PowerNV platform, the OPAL interrupts are exported by firmware
through device-node property (/ibm,opal::opal-interrupts). Under
some extreme circumstances (e.g. simulator), we don't have this
property found from the device tree. For that case, we shouldn't
allocate the interrupt map. Otherwise, slab complains allocating
zero sized memory chunk.

Signed-off-by: Gavin Shan <redacted>
---
v2: rebased on seperate function for OPAL IRQ setup
---
 arch/powerpc/platforms/powernv/opal.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 411975c..b3a2c66 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c

@@ -702,11 +702,12 @@ static void __init opal_irq_init(struct device_node *dn)
 
 	/* Get interrupt property */
 	irqs = of_get_property(opal_node, "opal-interrupts", &irqlen);
-	pr_debug("opal: Found %d interrupts reserved for OPAL\n",
-		 irqs ? (irqlen / 4) : 0);
+	opal_irq_count = irqs ? (irqlen / 4) : 0;
+	pr_debug("opal: Found %d interrupts reserved for OPAL\n", opal_irq_count);
+	if (!opal_irq_count)
+		return;
 
 	/* Install interrupt handlers */
-	opal_irq_count = irqlen / 4;
 	opal_irqs = kzalloc(opal_irq_count * sizeof(unsigned int), GFP_KERNEL);
 	for (i = 0; irqs && i < opal_irq_count; i++, irqs++) {
 		unsigned int irq, virq;

-- 
1.8.3.2

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help