From: Bob Cochran <hidden> Date: 2014-09-23 04:01:22
On 09/22/2014 06:21 PM, Scott Wood wrote:
Highlights include DMA32 zone support (SATA, USB, etc now works on 64-bit
FSL kernels), MSI changes, 8xx optimizations and cleanup, t104x board
support, and PrPMC PCI enumeration.
The following changes since commit 78eb9094ca08a40b8f9d3e113a2b88e0b7dbad1d:
powerpc/t2080rdb: Add T2080RDB board support (2014-07-31 00:11:10 -0500)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git next
for you to fetch changes up to cb0446c1b625326682ec4f9d1dd10779433646bc:
Revert "powerpc/fsl_msi: spread msi ints across different MSIRs" (2014-09-19 15:20:42 -0500)
----------------------------------------------------------------
Aaron Sierra (2):
fsl_ifc: Fix csor_ext position in fsl_ifc_regs
powerpc: fsl_pci: Add forced PCI Agent enumeration
LEROY Christophe (7):
powerpc/8xx: Declare SPRG2 as a SCRATCH register
powerpc/8xx: Use SCRATCH0 and SCRATCH1 also for TLB handlers
powerpc/8xx: Remove loading of r10 at end of FixupDAR
powerpc/8xx: Fix comment about DIRTY update
powerpc/8xx: No need to save r10 and r3 when not calling FixupDAR
powerpc/8xx: Optimize verification in FixupDAR
powerpc/8xx: Duplicate two insns instead of branching
Nikhil Badola (3):
powerpc: configs: Add VFAT file-system configs
powerpc: dts: t4240: Change T4240 USB controller version
powerpc: dts: t208x: Change T208x USB controller version
Priyanka Jain (2):
powerpc/fsl-booke: Add initial T1040/T1042 RDB board support
Hi Scott,
I would like to try your next branch with my t1040rdb along with DPAA
support / drivers. I don't see DPAA support in your repo. Can you
point me to a DPAA patch set somewhere, or am I on my own to merge what
I need from sdk or yocto?
Thanks,
Bob
powerpc/fsl-booke: Add initial T1042RDB_PI board support
Scott Wood (7):
powerpc: Dynamic DMA zone limits
powerpc/64: Honor swiotlb limit in coherent allocations
powerpc/64: Limit ZONE_DMA32 to 4GiB in swiotlb_detect_4g()
powerpc/fsl-pci: Limit ZONE_DMA32 to 2GiB on 64-bit platforms
powerpc/85xx/defconfig: Remove duplicate CONFIG_RTC_DRV_DS1307
powerpc/mm: Use common paging_init() for NUMA
Revert "powerpc/fsl_msi: spread msi ints across different MSIRs"
Tudor Laurentiu (6):
powerpc/fsl_msi: support vmpic msi with mpic 4.3
powerpc/fsl_msi: reorganize structs to improve clarity and flexibility
powerpc/fsl_msi: change the irq handler from chained to normal
powerpc/fsl_msi: show more meaningful names in /proc/interrupts
powerpc/fsl_msi: spread msi ints across different MSIRs
powerpc/fsl-booke64: add missing virtualization options in defconfig
Documentation/devicetree/bindings/pci/fsl,pci.txt | 27 ++++
arch/powerpc/Kconfig | 4 +
arch/powerpc/boot/dts/fsl/t2081si-post.dtsi | 4 +-
arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 4 +-
arch/powerpc/boot/dts/t1040rdb.dts | 48 +++++++
arch/powerpc/boot/dts/t1042rdb.dts | 48 +++++++
arch/powerpc/boot/dts/t1042rdb_pi.dts | 57 ++++++++
arch/powerpc/boot/dts/t104xrdb.dtsi | 156 ++++++++++++++++++++++
arch/powerpc/configs/corenet32_smp_defconfig | 2 +
arch/powerpc/configs/corenet64_smp_defconfig | 46 ++-----
arch/powerpc/configs/mpc85xx_defconfig | 4 +-
arch/powerpc/configs/mpc85xx_smp_defconfig | 4 +-
arch/powerpc/configs/mpc86xx_defconfig | 3 +
arch/powerpc/include/asm/pgtable.h | 3 +
arch/powerpc/include/asm/reg.h | 3 +-
arch/powerpc/kernel/dma-swiotlb.c | 8 +-
arch/powerpc/kernel/dma.c | 33 +++++
arch/powerpc/kernel/head_8xx.S | 150 ++++++++-------------
arch/powerpc/mm/mem.c | 68 +++++++++-
arch/powerpc/mm/numa.c | 8 --
arch/powerpc/platforms/85xx/Kconfig | 2 +-
arch/powerpc/platforms/85xx/corenet_generic.c | 14 ++
arch/powerpc/platforms/85xx/qemu_e500.c | 10 ++
arch/powerpc/sysdev/fsl_msi.c | 95 ++++++-------
arch/powerpc/sysdev/fsl_msi.h | 4 +-
arch/powerpc/sysdev/fsl_pci.c | 3 +-
include/linux/fsl_ifc.h | 6 +-
27 files changed, 610 insertions(+), 204 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/fsl,pci.txt
create mode 100644 arch/powerpc/boot/dts/t1040rdb.dts
create mode 100644 arch/powerpc/boot/dts/t1042rdb.dts
create mode 100644 arch/powerpc/boot/dts/t1042rdb_pi.dts
create mode 100644 arch/powerpc/boot/dts/t104xrdb.dtsi
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
From: Scott Wood <hidden> Date: 2014-09-23 05:45:23
On Mon, 2014-09-22 at 23:52 -0400, Bob Cochran wrote:
On 09/22/2014 06:21 PM, Scott Wood wrote:
quoted
Highlights include DMA32 zone support (SATA, USB, etc now works on 64-bit
FSL kernels), MSI changes, 8xx optimizations and cleanup, t104x board
support, and PrPMC PCI enumeration.
The following changes since commit 78eb9094ca08a40b8f9d3e113a2b88e0b7dbad1d:
powerpc/t2080rdb: Add T2080RDB board support (2014-07-31 00:11:10 -0500)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git next
for you to fetch changes up to cb0446c1b625326682ec4f9d1dd10779433646bc:
Revert "powerpc/fsl_msi: spread msi ints across different MSIRs" (2014-09-19 15:20:42 -0500)
----------------------------------------------------------------
Aaron Sierra (2):
fsl_ifc: Fix csor_ext position in fsl_ifc_regs
powerpc: fsl_pci: Add forced PCI Agent enumeration
LEROY Christophe (7):
powerpc/8xx: Declare SPRG2 as a SCRATCH register
powerpc/8xx: Use SCRATCH0 and SCRATCH1 also for TLB handlers
powerpc/8xx: Remove loading of r10 at end of FixupDAR
powerpc/8xx: Fix comment about DIRTY update
powerpc/8xx: No need to save r10 and r3 when not calling FixupDAR
powerpc/8xx: Optimize verification in FixupDAR
powerpc/8xx: Duplicate two insns instead of branching
Nikhil Badola (3):
powerpc: configs: Add VFAT file-system configs
powerpc: dts: t4240: Change T4240 USB controller version
powerpc: dts: t208x: Change T208x USB controller version
Priyanka Jain (2):
powerpc/fsl-booke: Add initial T1040/T1042 RDB board support
Hi Scott,
I would like to try your next branch with my t1040rdb along with DPAA
support / drivers. I don't see DPAA support in your repo. Can you
point me to a DPAA patch set somewhere, or am I on my own to merge what
I need from sdk or yocto?
Unfortunately DPAA support has not yet been upstreamed, though it is
being worked on. For now if you need DPAA with the latest kernel,
you'll need to merge it yourself based on the SDK code. It also
wouldn't hurt to let any sales/support contact you may have at
Freescale know that this is important to you.
-Scott
"Linuxppc-dev"
[off-list ref]
wrote on 2014/09/23 07:45:06:
On Mon, 2014-09-22 at 23:52 -0400, Bob Cochran wrote:
quoted
On 09/22/2014 06:21 PM, Scott Wood wrote:
quoted
Highlights include DMA32 zone support (SATA, USB, etc now works on
64-bit
quoted
quoted
FSL kernels), MSI changes, 8xx optimizations and cleanup, t104x
board
quoted
quoted
support, and PrPMC PCI enumeration.
The following changes since commit
78eb9094ca08a40b8f9d3e113a2b88e0b7dbad1d:
quoted
quoted
powerpc/t2080rdb: Add T2080RDB board support (2014-07-31 00:11:10
-0500)
quoted
quoted
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git
next
quoted
quoted
for you to fetch changes up to
cb0446c1b625326682ec4f9d1dd10779433646bc:
quoted
quoted
Revert "powerpc/fsl_msi: spread msi ints across different MSIRs"
(2014-09-19 15:20:42 -0500)
quoted
quoted
----------------------------------------------------------------
Aaron Sierra (2):
fsl_ifc: Fix csor_ext position in fsl_ifc_regs
powerpc: fsl_pci: Add forced PCI Agent enumeration
LEROY Christophe (7):
powerpc/8xx: Declare SPRG2 as a SCRATCH register
powerpc/8xx: Use SCRATCH0 and SCRATCH1 also for TLB handlers
powerpc/8xx: Remove loading of r10 at end of FixupDAR
powerpc/8xx: Fix comment about DIRTY update
powerpc/8xx: No need to save r10 and r3 when not calling
FixupDAR
quoted
quoted
powerpc/8xx: Optimize verification in FixupDAR
powerpc/8xx: Duplicate two insns instead of branching
Nikhil Badola (3):
powerpc: configs: Add VFAT file-system configs
powerpc: dts: t4240: Change T4240 USB controller version
powerpc: dts: t208x: Change T208x USB controller version
Priyanka Jain (2):
powerpc/fsl-booke: Add initial T1040/T1042 RDB board support
Hi Scott,
I would like to try your next branch with my t1040rdb along with DPAA
support / drivers. I don't see DPAA support in your repo. Can you
point me to a DPAA patch set somewhere, or am I on my own to merge
what
quoted
I need from sdk or yocto?
Unfortunately DPAA support has not yet been upstreamed, though it is
being worked on. For now if you need DPAA with the latest kernel,
you'll need to merge it yourself based on the SDK code. It also
wouldn't hurt to let any sales/support contact you may have at
Freescale know that this is important to you.
Scott, does your tree contain basic FMAN eth drives(no DPAA) for T1042RDB?
If not, is there a tree somewhere which has this(other than the Freescale
SDK tree)?
Jocke
From: Scott Wood <hidden> Date: 2014-09-23 12:37:28
On Tue, 2014-09-23 at 12:47 +0200, Joakim Tjernlund wrote:
"Linuxppc-dev"
[off-list ref]
wrote on 2014/09/23 07:45:06:
quoted
On Mon, 2014-09-22 at 23:52 -0400, Bob Cochran wrote:
quoted
On 09/22/2014 06:21 PM, Scott Wood wrote:
quoted
Highlights include DMA32 zone support (SATA, USB, etc now works on
64-bit
quoted
quoted
quoted
FSL kernels), MSI changes, 8xx optimizations and cleanup, t104x
board
quoted
quoted
quoted
support, and PrPMC PCI enumeration.
The following changes since commit
78eb9094ca08a40b8f9d3e113a2b88e0b7dbad1d:
quoted
quoted
quoted
powerpc/t2080rdb: Add T2080RDB board support (2014-07-31 00:11:10
-0500)
quoted
quoted
quoted
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git
next
quoted
quoted
quoted
for you to fetch changes up to
cb0446c1b625326682ec4f9d1dd10779433646bc:
quoted
quoted
quoted
Revert "powerpc/fsl_msi: spread msi ints across different MSIRs"
(2014-09-19 15:20:42 -0500)
quoted
quoted
quoted
----------------------------------------------------------------
Aaron Sierra (2):
fsl_ifc: Fix csor_ext position in fsl_ifc_regs
powerpc: fsl_pci: Add forced PCI Agent enumeration
LEROY Christophe (7):
powerpc/8xx: Declare SPRG2 as a SCRATCH register
powerpc/8xx: Use SCRATCH0 and SCRATCH1 also for TLB handlers
powerpc/8xx: Remove loading of r10 at end of FixupDAR
powerpc/8xx: Fix comment about DIRTY update
powerpc/8xx: No need to save r10 and r3 when not calling
FixupDAR
quoted
quoted
quoted
powerpc/8xx: Optimize verification in FixupDAR
powerpc/8xx: Duplicate two insns instead of branching
Nikhil Badola (3):
powerpc: configs: Add VFAT file-system configs
powerpc: dts: t4240: Change T4240 USB controller version
powerpc: dts: t208x: Change T208x USB controller version
Priyanka Jain (2):
powerpc/fsl-booke: Add initial T1040/T1042 RDB board support
Hi Scott,
I would like to try your next branch with my t1040rdb along with DPAA
support / drivers. I don't see DPAA support in your repo. Can you
point me to a DPAA patch set somewhere, or am I on my own to merge
what
quoted
quoted
I need from sdk or yocto?
Unfortunately DPAA support has not yet been upstreamed, though it is
being worked on. For now if you need DPAA with the latest kernel,
you'll need to merge it yourself based on the SDK code. It also
wouldn't hurt to let any sales/support contact you may have at
Freescale know that this is important to you.
Scott, does your tree contain basic FMAN eth drives(no DPAA) for T1042RDB?
Do you mean an independent mode driver? No.
My tree doesn't contain anything other than what the above pull request
says. :-)
If not, is there a tree somewhere which has this(other than the Freescale
SDK tree)?
From: Bob Cochran <hidden> Date: 2014-09-23 16:27:41
On 09/23/2014 01:45 AM, Scott Wood wrote:
On Mon, 2014-09-22 at 23:52 -0400, Bob Cochran wrote:
quoted
On 09/22/2014 06:21 PM, Scott Wood wrote:
quoted
Highlights include DMA32 zone support (SATA, USB, etc now works on 64-bit
FSL kernels), MSI changes, 8xx optimizations and cleanup, t104x board
support, and PrPMC PCI enumeration.
The following changes since commit 78eb9094ca08a40b8f9d3e113a2b88e0b7dbad1d:
powerpc/t2080rdb: Add T2080RDB board support (2014-07-31 00:11:10 -0500)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git next
for you to fetch changes up to cb0446c1b625326682ec4f9d1dd10779433646bc:
Revert "powerpc/fsl_msi: spread msi ints across different MSIRs" (2014-09-19 15:20:42 -0500)
----------------------------------------------------------------
Aaron Sierra (2):
fsl_ifc: Fix csor_ext position in fsl_ifc_regs
powerpc: fsl_pci: Add forced PCI Agent enumeration
LEROY Christophe (7):
powerpc/8xx: Declare SPRG2 as a SCRATCH register
powerpc/8xx: Use SCRATCH0 and SCRATCH1 also for TLB handlers
powerpc/8xx: Remove loading of r10 at end of FixupDAR
powerpc/8xx: Fix comment about DIRTY update
powerpc/8xx: No need to save r10 and r3 when not calling FixupDAR
powerpc/8xx: Optimize verification in FixupDAR
powerpc/8xx: Duplicate two insns instead of branching
Nikhil Badola (3):
powerpc: configs: Add VFAT file-system configs
powerpc: dts: t4240: Change T4240 USB controller version
powerpc: dts: t208x: Change T208x USB controller version
Priyanka Jain (2):
powerpc/fsl-booke: Add initial T1040/T1042 RDB board support
Hi Scott,
I would like to try your next branch with my t1040rdb along with DPAA
support / drivers. I don't see DPAA support in your repo. Can you
point me to a DPAA patch set somewhere, or am I on my own to merge what
I need from sdk or yocto?
Unfortunately DPAA support has not yet been upstreamed, though it is
being worked on.
It's great to see you confirm this. Thank you.
Can you share a time frame on when we'll see DPAA patches start showing
up? I assume it will have FSL_USDPAA support stripped out?
For now if you need DPAA with the latest kernel,
you'll need to merge it yourself based on the SDK code. It also
wouldn't hurt to let any sales/support contact you may have at
Freescale know that this is important to you.
-Scott
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
From: Scott Wood <hidden> Date: 2014-10-03 19:53:05
On Mon, 2014-09-22 at 17:21 -0500, Scott Wood wrote:
Highlights include DMA32 zone support (SATA, USB, etc now works on 64-bit
FSL kernels), MSI changes, 8xx optimizations and cleanup, t104x board
support, and PrPMC PCI enumeration.
The following changes since commit 78eb9094ca08a40b8f9d3e113a2b88e0b7dbad1d:
powerpc/t2080rdb: Add T2080RDB board support (2014-07-31 00:11:10 -0500)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git next
for you to fetch changes up to cb0446c1b625326682ec4f9d1dd10779433646bc:
Revert "powerpc/fsl_msi: spread msi ints across different MSIRs" (2014-09-19 15:20:42 -0500)
From: Stephen Rothwell <hidden> Date: 2014-10-03 23:06:52
Hi Scott,
On Fri, 3 Oct 2014 14:52:53 -0500 Scott Wood [off-list ref] wrote:
On Mon, 2014-09-22 at 17:21 -0500, Scott Wood wrote:
quoted
Highlights include DMA32 zone support (SATA, USB, etc now works on 64-bit
FSL kernels), MSI changes, 8xx optimizations and cleanup, t104x board
support, and PrPMC PCI enumeration.
The following changes since commit 78eb9094ca08a40b8f9d3e113a2b88e0b7dbad1d:
powerpc/t2080rdb: Add T2080RDB board support (2014-07-31 00:11:10 -0500)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git next
for you to fetch changes up to cb0446c1b625326682ec4f9d1dd10779433646bc:
Revert "powerpc/fsl_msi: spread msi ints across different MSIRs" (2014-09-19 15:20:42 -0500)
ping
Probably worth explicitly pinging Michael (cc'd) as he is doing this
merge window's collection ...
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au