[PATCH] powerpc: fix build failure in sysdev/mpic.c for MPIC_WEIRD=y
From: Paul Gortmaker <hidden>
Date: 2014-02-07 19:51:56
Subsystem:
linux for powerpc (32-bit and 64-bit), the rest · Maintainers:
Madhavan Srinivasan, Linus Torvalds
Commit 446f6d06fab0b49c61887ecbe8286d6aaa796637 ("powerpc/mpic: Properly
set default triggers") breaks the mpc7447_hpc_defconfig as follows:
CC arch/powerpc/sysdev/mpic.o
arch/powerpc/sysdev/mpic.c: In function 'mpic_set_irq_type':
arch/powerpc/sysdev/mpic.c:886:9: error: case label does not reduce to an integer constant
arch/powerpc/sysdev/mpic.c:890:9: error: case label does not reduce to an integer constant
arch/powerpc/sysdev/mpic.c:894:9: error: case label does not reduce to an integer constant
arch/powerpc/sysdev/mpic.c:898:9: error: case label does not reduce to an integer constant
Looking at the cpp output (gcc 4.7.3), I see:
case mpic->hw_set[MPIC_IDX_VECPRI_SENSE_EDGE] |
mpic->hw_set[MPIC_IDX_VECPRI_POLARITY_POSITIVE]:
The pointer into an array appears because CONFIG_MPIC_WEIRD=y is set
for this platform, thus enabling the following:
-------------------
#ifdef CONFIG_MPIC_WEIRD
static u32 mpic_infos[][MPIC_IDX_END] = {
[0] = { /* Original OpenPIC compatible MPIC */
[...]
#define MPIC_INFO(name) mpic->hw_set[MPIC_IDX_##name]
#else /* CONFIG_MPIC_WEIRD */
#define MPIC_INFO(name) MPIC_##name
#endif /* CONFIG_MPIC_WEIRD */
-------------------
Here we convert the case section to if/else if, and also add
the equivalent of a default case to warn about unknown types.
Boot tested on sbc8548, build tested on all defconfigs.
Signed-off-by: Paul Gortmaker <redacted>
---
arch/powerpc/sysdev/mpic.c | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 0e166ed4cd16..8209744b2829 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c@@ -886,25 +886,25 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type) /* Default: read HW settings */ if (flow_type == IRQ_TYPE_DEFAULT) { - switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) | - MPIC_INFO(VECPRI_SENSE_MASK))) { - case MPIC_INFO(VECPRI_SENSE_EDGE) | - MPIC_INFO(VECPRI_POLARITY_POSITIVE): - flow_type = IRQ_TYPE_EDGE_RISING; - break; - case MPIC_INFO(VECPRI_SENSE_EDGE) | - MPIC_INFO(VECPRI_POLARITY_NEGATIVE): - flow_type = IRQ_TYPE_EDGE_FALLING; - break; - case MPIC_INFO(VECPRI_SENSE_LEVEL) | - MPIC_INFO(VECPRI_POLARITY_POSITIVE): - flow_type = IRQ_TYPE_LEVEL_HIGH; - break; - case MPIC_INFO(VECPRI_SENSE_LEVEL) | - MPIC_INFO(VECPRI_POLARITY_NEGATIVE): - flow_type = IRQ_TYPE_LEVEL_LOW; - break; - } + int vold_ps; + + vold_ps = vold & (MPIC_INFO(VECPRI_POLARITY_MASK) | + MPIC_INFO(VECPRI_SENSE_MASK)); + + if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE))) + flow_type = IRQ_TYPE_EDGE_RISING; + else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE))) + flow_type = IRQ_TYPE_EDGE_FALLING; + else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE))) + flow_type = IRQ_TYPE_LEVEL_HIGH; + else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE))) + flow_type = IRQ_TYPE_LEVEL_LOW; + else + WARN_ONCE(1, "mpic: unknown IRQ type %d\n", vold); } /* Apply to irq desc */
--
1.8.5.2