[PATCH] powerpc/defconfig: Enable ath9k wireless card support

Subsystems: linux for powerpc (32-bit and 64-bit), the rest

STALE4658d

2 messages, 2 authors, 2013-12-05 · open the first message on its own page

[PATCH] powerpc/defconfig: Enable ath9k wireless card support

From: Chunhe Lan <hidden>
Date: 2013-12-03 07:33:26 

On the P1023RDB, when board leaves the factory, it has
two Atheros wireless cards on the PCIe slot. So enable
ath9k wireless driver support.

Signed-off-by: Chunhe Lan <redacted>
Cc: Scott Wood <redacted>
---
 arch/powerpc/configs/85xx/p1023_defconfig |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/configs/85xx/p1023_defconfig b/arch/powerpc/configs/85xx/p1023_defconfig
index b06d37d..a3fe941 100644
--- a/arch/powerpc/configs/85xx/p1023_defconfig
+++ b/arch/powerpc/configs/85xx/p1023_defconfig
@@ -62,6 +62,9 @@ CONFIG_INET_ESP=y
 # CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
+CONFIG_CFG80211=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -101,6 +104,8 @@ CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_FIXED_PHY=y
+CONFIG_ATH_CARDS=y
+CONFIG_ATH9K=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
-- 
1.7.6.5

Re: [PATCH] powerpc/defconfig: Enable ath9k wireless card support

From: Scott Wood <hidden>
Date: 2013-12-05 23:18:52 

On Tue, 2013-12-03 at 15:32 +0800, Chunhe Lan wrote:
quoted hunk
On the P1023RDB, when board leaves the factory, it has
two Atheros wireless cards on the PCIe slot. So enable
ath9k wireless driver support.

Signed-off-by: Chunhe Lan <redacted>
Cc: Scott Wood <redacted>
---
 arch/powerpc/configs/85xx/p1023_defconfig |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/configs/85xx/p1023_defconfig b/arch/powerpc/configs/85xx/p1023_defconfig
index b06d37d..a3fe941 100644
--- a/arch/powerpc/configs/85xx/p1023_defconfig
+++ b/arch/powerpc/configs/85xx/p1023_defconfig
@@ -62,6 +62,9 @@ CONFIG_INET_ESP=y
 # CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
 CONFIG_IP_SCTP=m
+CONFIG_CFG80211=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -101,6 +104,8 @@ CONFIG_DAVICOM_PHY=y
 CONFIG_CICADA_PHY=y
 CONFIG_VITESSE_PHY=y
 CONFIG_FIXED_PHY=y
+CONFIG_ATH_CARDS=y
+CONFIG_ATH9K=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
I thought we decided the p1023 defconfig was going away (to possibly
return if/when datapath is upstreamed and is deemed too large for the
main config)?

-Scott
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help