# Build errors on mainline kernel - Subsystems: LINUX FOR POWERPC (32-BIT AND 64-BIT), LINUX FOR POWERPC EMBEDDED PPC85XX, THE REST - Maintainers: Madhavan Srinivasan, Scott Wood, Linus Torvalds - List: linuxppc-dev - 6 messages, 3 authors - Page: https://ratatoskr.run/linuxppc-dev/2013/08/9475781/t ## Build errors on mainline kernel - From: Sukadev Bhattiprolu \ - Date: 2013-08-09 18:25:19 - Message: https://ratatoskr.run/linuxppc-dev/2013/08/9475781.md ```text I am tryng to compile clean mainline kernel with a few different config files and running into errors with some configs. I am building on RHEL6.3 with following binaries: gcc (GCC) 4.4.6 20120305 (Red Hat 4.4.6-4) GNU ld version 2.20.51.0.2-5.34.el6 20100205 binutils-2.20.51.0.2-5.34.el6.ppc64 binutils-devel-2.20.51.0.2-5.34.el6.ppc64 I am getting the error with several files and configs, but other configs (eg: ppc64_defconfig, pmac32_defconfig) build fine. For instance, with latest mainline kernel (commit 6c2580c) and ppc64_defconfig, I get: make O=linux-obj mrproper make O=linux-obj ppc64e_defconfig make O=linux-obj arch/powerpc/platforms/85xx/smp.o ... CC arch/powerpc/platforms/85xx/smp.o {standard input}: Assembler messages: {standard input}:240: Error: junk at end of line: `1' make[2]: *** [arch/powerpc/platforms/85xx/smp.o] Error 1 make[1]: *** [arch/powerpc/platforms/85xx/smp.o] Error 2 Not sure if 240 is a line number in smp.c, but looking through the function containing line 240, I was able to compile the smp.c after commenting out the two WARN_ON() messages. diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp index 5ced4f5..9705850 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -151,8 +151,10 @@ static int smp_85xx_kick_cpu(int nr) int ioremappable; int ret = 0; +#if 0 WARN_ON(nr < 0 || nr >= NR_CPUS); WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS); +#endif pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr); --- The pre-processor output for the first WARN_ON() is: --- ({ int __ret_warn_on = !!(nr < 0 || nr >= 32); if (__builtin_constant_p(__ret_warn_on)) { if (__ret_warn_on) do { __asm__ __volatile__( "1: twi 31,0,0\n" ".section __bug_table,\"a\"\n" "2:\t" ".llong" " " "1b, %0\n" "\t.short %1, %2\n" ".org 2b+%3\n" ".previous\n" : : "i" ("/root/tmp/linux.git/arch/powerpc/platforms/85xx/smp.c"), "i" (154), "i" (((1 << 0) | ((9) << 8))), "i" (sizeof(struct bug_entry))); } while (0); } else { __asm__ __volatile__( "1: ""tdnei" " "" %4,0\n" ".section __bug_table,\"a\"\n" "2:\t" ".llong" " " "1b, %0\n" "\t.short %1, %2\n" ".org 2b+%3\n" ".previous\n" : : "i" ("/root/tmp/linux.git/arch/powerpc/platforms/85xx/smp.c"), "i" (154), "i" (((1 << 0) | ((9) << 8))), "i" (sizeof(struct bug_entry)), "r" (__ret_warn_on)); } __builtin_expect(!!(__ret_warn_on), 0); }); --- Should I be doing something different to build with these configs ? ``` ## Re: Build errors on mainline kernel - From: Kumar Gala \ - Date: 2013-08-09 23:47:11 - Message: https://ratatoskr.run/linuxppc-dev/2013/08/9475782.md ```text On Aug 9, 2013, at 1:24 PM, Sukadev Bhattiprolu wrote: >=20 > I am tryng to compile clean mainline kernel with a few different = config files > and running into errors with some configs. >=20 > I am building on RHEL6.3 with following binaries: >=20 > gcc (GCC) 4.4.6 20120305 (Red Hat 4.4.6-4) > GNU ld version 2.20.51.0.2-5.34.el6 20100205 > binutils-2.20.51.0.2-5.34.el6.ppc64 > binutils-devel-2.20.51.0.2-5.34.el6.ppc64 >=20 > I am getting the error with several files and configs, but other = configs=20 > (eg: ppc64_defconfig, pmac32_defconfig) build fine. >=20 > For instance, with latest mainline kernel (commit 6c2580c) and = ppc64_defconfig, I get: >=20 > make O=3Dlinux-obj mrproper > make O=3Dlinux-obj ppc64e_defconfig > make O=3Dlinux-obj arch/powerpc/platforms/85xx/smp.o > ... >=20 > CC arch/powerpc/platforms/85xx/smp.o > {standard input}: Assembler messages: > {standard input}:240: Error: junk at end of line: `1' > make[2]: *** [arch/powerpc/platforms/85xx/smp.o] Error 1 > make[1]: *** [arch/powerpc/platforms/85xx/smp.o] Error 2 >=20 > Not sure if 240 is a line number in smp.c, but looking through the = function > containing line 240, I was able to compile the smp.c after commenting = out > the two WARN_ON() messages. >=20 > diff --git a/arch/powerpc/platforms/85xx/smp.c = b/arch/powerpc/platforms/85xx/smp > index 5ced4f5..9705850 100644 > --- a/arch/powerpc/platforms/85xx/smp.c > +++ b/arch/powerpc/platforms/85xx/smp.c > @@ -151,8 +151,10 @@ static int smp_85xx_kick_cpu(int nr) > int ioremappable; > int ret =3D 0; >=20 > +#if 0 > WARN_ON(nr < 0 || nr >=3D NR_CPUS); > WARN_ON(hw_cpu < 0 || hw_cpu >=3D NR_CPUS); > +#endif >=20 > pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr); >=20 > --- >=20 > The pre-processor output for the first WARN_ON() is: >=20 > --- > ({ int __ret_warn_on =3D !!(nr < 0 || nr >=3D 32); if = (__builtin_constant_p(__ret_warn_on)) { if (__ret_warn_on) do { __asm__ = __volatile__( "1: twi 31,0,0\n" ".section __bug_table,\"a\"\n" "2:\t" = ".llong" " " "1b, %0\n" "\t.short %1, %2\n" ".org 2b+%3\n" ".previous\n" = : : "i" ("/root/tmp/linux.git/arch/powerpc/platforms/85xx/smp.c"), "i" = (154), "i" (((1 << 0) | ((9) << 8))), "i" (sizeof(struct bug_entry))); } = while (0); } else { __asm__ __volatile__( "1: ""tdnei" " "" = %4,0\n" ".section __bug_table,\"a\"\n" "2:\t" ".llong" " " "1b, %0\n" = "\t.short %1, %2\n" ".org 2b+%3\n" ".previous\n" : : "i" = ("/root/tmp/linux.git/arch/powerpc/platforms/85xx/smp.c"), "i" (154), = "i" (((1 << 0) | ((9) << 8))), "i" (sizeof(struct bug_entry)), "r" = (__ret_warn_on)); } __builtin_expect(!!(__ret_warn_on), 0); }); >=20 > --- >=20 >=20 > Should I be doing something different to build with these configs ? >=20 Hmm, that is odd. How about doing: $ make V=3D1 so we can see what compiler flags are being passed around. - k= ``` ## Re: Build errors on mainline kernel - From: Sukadev Bhattiprolu \ - Date: 2013-08-10 01:01:51 - Message: https://ratatoskr.run/linuxppc-dev/2013/08/9475783.md ```text Kumar Gala [galak@kernel.crashing.org] wrote: |=20 | >=20 | > The pre-processor output for the first WARN_ON() is: | >=20 | > --- | > ({ int __ret_warn_on =3D !!(nr < 0 || nr >=3D 32); if (__builtin_consta= nt_p(__ret_warn_on)) { if (__ret_warn_on) do { __asm__ __volatile__( "1: = twi 31,0,0\n" ".section __bug_table,\"a\"\n" "2:\t" ".llong" " " "1b, %0\n= " "\t.short %1, %2\n" ".org 2b+%3\n" ".previous\n" : : "i" ("/root/tmp/linu= x.git/arch/powerpc/platforms/85xx/smp.c"), "i" (154), "i" (((1 << 0) | ((9)= << 8))), "i" (sizeof(struct bug_entry))); } while (0); } else { __asm__ __= volatile__( "1: ""tdnei" " "" %4,0\n" ".section __bug_table,\"a\"\n"= "2:\t" ".llong" " " "1b, %0\n" "\t.short %1, %2\n" ".org 2b+%3\n" ".previo= us\n" : : "i" ("/root/tmp/linux.git/arch/powerpc/platforms/85xx/smp.c"), "i= " (154), "i" (((1 << 0) | ((9) << 8))), "i" (sizeof(struct bug_entry)), "r"= (__ret_warn_on)); } __builtin_expect(!!(__ret_warn_on), 0); }); | >=20 | > --- | >=20 | >=20 | > Should I be doing something different to build with these configs ? | >=20 |=20 | Hmm, that is odd. |=20 | How about doing: |=20 | $ make V=3D1 |=20 | so we can see what compiler flags are being passed around. Sure.=20 make -f /root/tmp/linux.git/scripts/Makefile.build obj=3Darch/powerpc/platf= orms/85xx arch/powerpc/platforms/85xx/smp.o gcc -m64 -Wp,-MD,arch/powerpc/platforms/85xx/.smp.o.d -nostdinc -isystem= /usr/lib/gcc/ppc64-redhat-linux/4.4.6/include -I/root/tmp/linux.git/arch/p= owerpc/include -Iarch/powerpc/include/generated -I/root/tmp/linux.git/incl= ude -Iinclude -I/root/tmp/linux.git/arch/powerpc/include/uapi -Iarch/powerp= c/include/generated/uapi -I/root/tmp/linux.git/include/uapi -Iinclude/gener= ated/uapi -include /root/tmp/linux.git/include/linux/kconfig.h -I/root/tmp= /linux.git/arch/powerpc/platforms/85xx -Iarch/powerpc/platforms/85xx -D__KE= RNEL__ -I/root/tmp/linux.git/arch/powerpc -Iarch/powerpc -Wall -Wundef -Ws= trict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-im= plicit-function-declaration -Wno-format-security -fno-delete-null-pointer-c= hecks -O2 -msoft-float -pipe -I/root/tmp/linux.git/arch/powerpc -Iarch/pow= erpc -mtraceback=3Dno -mcall-aixdesc -mcmodel=3Dmedium -mtune=3Dpower7 -mno= -altivec -mno-vsx -mno-spe -mspe=3Dno -funit-at-a-time -fno-dwarf2-cfi-asm = -mno-string -Wa,-me500 -Wframe-larger-than=3D2048 -fno-stack-protector -Wno= -unused-but-set-variable -fomit-frame-pointer -Wdeclaration-after-statement= -Wno-pointer-sign -fno-strict-overflow -fconserve-stack -DCC_HAVE_ASM_GOTO= -D"KBUILD_STR(s)=3D#s" -D"KBUILD_BASENAME=3DKBUILD_STR(smp)" -D"KBUILD= _MODNAME=3DKBUILD_STR(smp)" -c -o arch/powerpc/platforms/85xx/.tmp_smp.o /r= oot/tmp/linux.git/arch/powerpc/platforms/85xx/smp.c {standard input}: Assembler messages: {standard input}:244: Error: junk at end of line: `1' make[2]: *** [arch/powerpc/platforms/85xx/smp.o] Error 1 make[1]: *** [arch/powerpc/platforms/85xx/smp.o] Error 2 make: *** [sub-make] Error 2 ``` ## Re: Build errors on mainline kernel - From: Michael Ellerman \ - Date: 2013-08-12 05:42:03 - Message: https://ratatoskr.run/linuxppc-dev/2013/08/9475803.md ```text On Fri, 2013-08-09 at 11:24 -0700, Sukadev Bhattiprolu wrote: > I am tryng to compile clean mainline kernel with a few different config files > and running into errors with some configs. > > I am building on RHEL6.3 with following binaries: > > gcc (GCC) 4.4.6 20120305 (Red Hat 4.4.6-4) > GNU ld version 2.20.51.0.2-5.34.el6 20100205 > binutils-2.20.51.0.2-5.34.el6.ppc64 > binutils-devel-2.20.51.0.2-5.34.el6.ppc64 > > I am getting the error with several files and configs, but other configs > (eg: ppc64_defconfig, pmac32_defconfig) build fine. > > For instance, with latest mainline kernel (commit 6c2580c) and ppc64_defconfig, I get: Here you say ppc64_defconfig .. > make O=linux-obj mrproper > make O=linux-obj ppc64e_defconfig But here you say ppc64e_defconfig ? > make O=linux-obj arch/powerpc/platforms/85xx/smp.o > ... > > CC arch/powerpc/platforms/85xx/smp.o > {standard input}: Assembler messages: > {standard input}:240: Error: junk at end of line: `1' > make[2]: *** [arch/powerpc/platforms/85xx/smp.o] Error 1 > make[1]: *** [arch/powerpc/platforms/85xx/smp.o] Error 2 So I'm not clear which config you're building. cheers ``` ## Re: Build errors on mainline kernel - From: Sukadev Bhattiprolu \ - Date: 2013-08-12 06:02:59 - Message: https://ratatoskr.run/linuxppc-dev/2013/08/9475804.md ```text Michael Ellerman [michael@ellerman.id.au] wrote: | On Fri, 2013-08-09 at 11:24 -0700, Sukadev Bhattiprolu wrote: | > I am tryng to compile clean mainline kernel with a few different config files | > and running into errors with some configs. | > | > I am building on RHEL6.3 with following binaries: | > | > gcc (GCC) 4.4.6 20120305 (Red Hat 4.4.6-4) | > GNU ld version 2.20.51.0.2-5.34.el6 20100205 | > binutils-2.20.51.0.2-5.34.el6.ppc64 | > binutils-devel-2.20.51.0.2-5.34.el6.ppc64 | > | > I am getting the error with several files and configs, but other configs | > (eg: ppc64_defconfig, pmac32_defconfig) build fine. | > | > For instance, with latest mainline kernel (commit 6c2580c) and ppc64_defconfig, I get: | | Here you say ppc64_defconfig .. That was a stupid typo. ppc64_defconfig works. | | > make O=linux-obj mrproper | > make O=linux-obj ppc64e_defconfig | | But here you say ppc64e_defconfig ? ppc64e_defconfig fails (checked again now). ``` ## Re: Build errors on mainline kernel - From: Michael Ellerman \ - Date: 2013-08-13 02:23:50 - Message: https://ratatoskr.run/linuxppc-dev/2013/08/9475829.md ```text On Sun, Aug 11, 2013 at 11:02:28PM -0700, Sukadev Bhattiprolu wrote: > Michael Ellerman [michael@ellerman.id.au] wrote: > | On Fri, 2013-08-09 at 11:24 -0700, Sukadev Bhattiprolu wrote: > | > I am tryng to compile clean mainline kernel with a few different config files > | > and running into errors with some configs. > | > > | > I am building on RHEL6.3 with following binaries: > | > > | > gcc (GCC) 4.4.6 20120305 (Red Hat 4.4.6-4) > | > GNU ld version 2.20.51.0.2-5.34.el6 20100205 > | > binutils-2.20.51.0.2-5.34.el6.ppc64 > | > binutils-devel-2.20.51.0.2-5.34.el6.ppc64 > | > > | > I am getting the error with several files and configs, but other configs > | > (eg: ppc64_defconfig, pmac32_defconfig) build fine. > | > > | > For instance, with latest mainline kernel (commit 6c2580c) and ppc64_defconfig, I get: > | > | Here you say ppc64_defconfig .. > > That was a stupid typo. ppc64_defconfig works. > > | > | > make O=linux-obj mrproper > | > make O=linux-obj ppc64e_defconfig > | > | But here you say ppc64e_defconfig ? > > ppc64e_defconfig fails (checked again now). OK. I don't have a RHEL 6 system around. But I can build ppc64e_defconfig on debian with gcc 4.4.7-2. So not sure what's going on. cheers ```