[PATCH 1/1] powerpc: dts: virtex440: add ethernet phy to virtex440-ml507
From: Gernot Vormayr <hidden>
Date: 2012-11-14 16:59:30
Also in:
lkml
Subsystem:
linux for powerpc (32-bit and 64-bit), the rest · Maintainers:
Madhavan Srinivasan, Linus Torvalds
This adds the marvel phy which is present on the ml507 board. Without this ethtool causes kernel-oopses. Tested on ml507 board. Signed-off-by: Gernot Vormayr <redacted> --- arch/powerpc/boot/dts/virtex440-ml507.dts | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts
index 52d8c1a..fc7073b 100644
--- a/arch/powerpc/boot/dts/virtex440-ml507.dts
+++ b/arch/powerpc/boot/dts/virtex440-ml507.dts@@ -272,6 +272,12 @@ xlnx,temac-type = <0>; xlnx,txcsum = <1>; xlnx,txfifo = <0x1000>; + phy-handle = <&phy7>; + clock-frequency = <100000000>; + phy7: phy@7 { + compatible = "marvell,88e1111"; + reg = <7>; + } ; } ; } ; IIC_EEPROM: i2c@81600000 {
--
1.7.9.5