[PATCH 1/4] powerpc: make POWER7 setup code generic name

Subsystems: linux for powerpc (32-bit and 64-bit), the rest

STALE5025d

9 messages, 2 authors, 2012-11-15 · open the first message on its own page

[PATCH 1/4] powerpc: make POWER7 setup code generic name

From: Michael Neuling <hidden>
Date: 2012-10-31 05:34:13

We are going to reuse this in POWER8 so make the name generic.

Signed-off-by: Michael Neuling <redacted>
---
 arch/powerpc/kernel/Makefile                       |    2 +-
 .../{cpu_setup_power7.S => cpu_setup_power.S}      |    0
 2 files changed, 1 insertion(+), 1 deletion(-)
 rename arch/powerpc/kernel/{cpu_setup_power7.S => cpu_setup_power.S} (100%)

diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index cde12f8..8f61934 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile

@@ -38,7 +38,7 @@ obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   paca.o nvram_64.o firmware.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_ppc970.o cpu_setup_pa6t.o
-obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_power7.o
+obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_power.o
 obj64-$(CONFIG_RELOCATABLE)	+= reloc_64.o
 obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o idle_book3e.o
 obj-$(CONFIG_PPC_A2)		+= cpu_setup_a2.o

diff --git a/arch/powerpc/kernel/cpu_setup_power7.S b/arch/powerpc/kernel/cpu_setup_power.S
similarity index 100%
rename from arch/powerpc/kernel/cpu_setup_power7.S
rename to arch/powerpc/kernel/cpu_setup_power.S
-- 
1.7.9.5

[PATCH 2/4] powerpc: Add POWER8 setup code

From: Michael Neuling <hidden>
Date: 2012-10-31 05:34:14

Just a copy of POWER7 for now.  Will update with new code later.

Signed-off-by: Michael Neuling <redacted>
---
 arch/powerpc/kernel/cpu_setup_power.S |   24 ++++++++++++++++++++++++
 arch/powerpc/kernel/cputable.c        |    2 ++
 2 files changed, 26 insertions(+)

diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
index 76797c5..a92101d 100644
--- a/arch/powerpc/kernel/cpu_setup_power.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S

@@ -44,6 +44,30 @@ _GLOBAL(__restore_cpu_power7)
 	mtlr	r11
 	blr
 
+_GLOBAL(__setup_cpu_power8)
+	mflr	r11
+	bl	__init_hvmode_206
+	mtlr	r11
+	beqlr
+	li	r0,0
+	mtspr	SPRN_LPID,r0
+	bl	__init_LPCR
+	bl	__init_TLB
+	mtlr	r11
+	blr
+
+_GLOBAL(__restore_cpu_power8)
+	mflr	r11
+	mfmsr	r3
+	rldicl.	r0,r3,4,63
+	beqlr
+	li	r0,0
+	mtspr	SPRN_LPID,r0
+	bl	__init_LPCR
+	bl	__init_TLB
+	mtlr	r11
+	blr
+
 __init_hvmode_206:
 	/* Disable CPU_FTR_HVMODE and exit if MSR:HV is not set */
 	mfmsr	r3

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 0514c21..361f6d9 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c

@@ -68,6 +68,8 @@ extern void __restore_cpu_pa6t(void);
 extern void __restore_cpu_ppc970(void);
 extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
 extern void __restore_cpu_power7(void);
+extern void __setup_cpu_power8(unsigned long offset, struct cpu_spec* spec);
+extern void __restore_cpu_power8(void);
 extern void __restore_cpu_a2(void);
 #endif /* CONFIG_PPC64 */
 #if defined(CONFIG_E500)

-- 
1.7.9.5

[PATCH 3/4] powerpc: POWER8 cputable entry

From: Michael Neuling <hidden>
Date: 2012-10-31 05:34:15

Signed-off-by: Michael Neuling <redacted>
---
 arch/powerpc/include/asm/cputable.h |   12 ++++++++++--
 arch/powerpc/include/asm/mmu.h      |    1 +
 arch/powerpc/include/asm/reg.h      |    1 +
 arch/powerpc/kernel/cputable.c      |   21 +++++++++++++++++++++
 4 files changed, 33 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 21a0687..76f81bd 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h

@@ -401,6 +401,14 @@ extern const char *powerpc_base_platform;
 	    CPU_FTR_DSCR | CPU_FTR_SAO  | CPU_FTR_ASYM_SMT | \
 	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
 	    CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY)
+#define CPU_FTRS_POWER8 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\
+	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_COHERENT_ICACHE | \
+	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+	    CPU_FTR_DSCR | CPU_FTR_SAO  | \
+	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
+	    CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY)
 #define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \

@@ -421,8 +429,8 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_POSSIBLE	\
 	    (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |	\
 	    CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 |	\
-	    CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T |		\
-	    CPU_FTR_VSX)
+	    CPU_FTRS_POWER7 | CPU_FTRS_POWER8 | CPU_FTRS_CELL |		\
+	    CPU_FTRS_PA6T | CPU_FTR_VSX)
 #endif
 #else
 enum {

diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 5e38eed..691fd8a 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h

@@ -101,6 +101,7 @@
 #define MMU_FTRS_POWER5		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
 #define MMU_FTRS_POWER6		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
 #define MMU_FTRS_POWER7		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_POWER8		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
 #define MMU_FTRS_CELL		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
 				MMU_FTR_CI_LARGE_PAGE
 #define MMU_FTRS_PA6T		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index d24c141..7b44a6e 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h

@@ -1029,6 +1029,7 @@
 #define PVR_970MP	0x0044
 #define PVR_970GX	0x0045
 #define PVR_POWER7p	0x004A
+#define PVR_POWER8	0x004B
 #define PVR_BE		0x0070
 #define PVR_PA6T	0x0090

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 361f6d9..216ff84 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c

@@ -96,6 +96,10 @@ extern void __restore_cpu_e5500(void);
 				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
 				 PPC_FEATURE_TRUE_LE | \
 				 PPC_FEATURE_PSERIES_PERFMON_COMPAT)
+#define COMMON_USER_POWER8	(COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_06 |\
+				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
+				 PPC_FEATURE_TRUE_LE | \
+				 PPC_FEATURE_PSERIES_PERFMON_COMPAT)
 #define COMMON_USER_PA6T	(COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\
 				 PPC_FEATURE_TRUE_LE | \
 				 PPC_FEATURE_HAS_ALTIVEC_COMP)

@@ -465,6 +469,23 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_restore		= __restore_cpu_power7,
 		.platform		= "power7+",
 	},
+	{	/* Power8 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x004b0000,
+		.cpu_name		= "POWER8 (raw)",
+		.cpu_features		= CPU_FTRS_POWER8,
+		.cpu_user_features	= COMMON_USER_POWER8,
+		.mmu_features		= MMU_FTRS_POWER8,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_IBM,
+		.oprofile_cpu_type	= "ppc64/power8",
+		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.cpu_setup		= __setup_cpu_power8,
+		.cpu_restore		= __restore_cpu_power8,
+		.platform		= "power8",
+	},
 	{	/* Cell Broadband Engine */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00700000,

-- 
1.7.9.5

[PATCH 4/4] powerpc/pseries: Update ibm, architecture.vec for PAPR 2.7/POWER8

From: Michael Neuling <hidden>
Date: 2012-10-31 05:34:16

Update ibm,architecture.vec for Sub-Processor Representation Level.
Allows us to support more than one parition per core.

This is untested so far as we don't have pHyp

Signed-off-by: Michael Neuling <redacted>
---
 arch/powerpc/kernel/prom_init.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index cb6c123..09b1c7c 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c

@@ -707,6 +707,7 @@ static void __init early_cmdline_parse(void)
 #define OV5_PFO_HW_RNG		0x80	/* PFO Random Number Generator */
 #define OV5_PFO_HW_842		0x40	/* PFO Compression Accelerator */
 #define OV5_PFO_HW_ENCR		0x20	/* PFO Encryption Accelerator */
+#define OV5_SUB_PROCESSORS	0x01    /* 1,2,or 4 Sub-Processors supported */
 
 /* Option Vector 6: IBM PAPR hints */
 #define OV6_LINUX		0x02	/* Linux is our OS */

@@ -755,7 +756,7 @@ static unsigned char ibm_architecture_vec[] = {
 	OV4_MIN_ENT_CAP,		/* minimum VP entitled capacity */
 
 	/* option vector 5: PAPR/OF options */
-	18 - 2,				/* length */
+	19 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
 	OV5_DONATE_DEDICATE_CPU | OV5_MSI,

@@ -776,6 +777,7 @@ static unsigned char ibm_architecture_vec[] = {
 	0,
 	0,
 	OV5_PFO_HW_RNG | OV5_PFO_HW_ENCR | OV5_PFO_HW_842,
+	OV5_SUB_PROCESSORS,
 	/* option vector 6: IBM PAPR hints */
 	4 - 2,				/* length */
 	0,

-- 
1.7.9.5

[PATCH] powerpc/pseries: Update ibm, architecture.vec for PAPR 2.7/POWER8

From: Michael Neuling <hidden>
Date: 2012-11-09 06:23:11

Update ibm,architecture.vec for POWER8 and allows us to support more
than one parition per core.

Signed-off-by: Michael Neuling <redacted>
---
v2: Missed some bits in the original post..

 arch/powerpc/kernel/prom_init.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index cb6c123..9ffb542 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c

@@ -671,6 +671,7 @@ static void __init early_cmdline_parse(void)
 #define OV1_PPC_2_04		0x08	/* set if we support PowerPC 2.04 */
 #define OV1_PPC_2_05		0x04	/* set if we support PowerPC 2.05 */
 #define OV1_PPC_2_06		0x02	/* set if we support PowerPC 2.06 */
+#define OV1_PPC_2_07		0x01	/* set if we support PowerPC 2.07 */
 
 /* Option vector 2: Open Firmware options supported */
 #define OV2_REAL_MODE		0x20	/* set if we want OF in real mode */

@@ -707,6 +708,7 @@ static void __init early_cmdline_parse(void)
 #define OV5_PFO_HW_RNG		0x80	/* PFO Random Number Generator */
 #define OV5_PFO_HW_842		0x40	/* PFO Compression Accelerator */
 #define OV5_PFO_HW_ENCR		0x20	/* PFO Encryption Accelerator */
+#define OV5_SUB_PROCESSORS	0x01    /* 1,2,or 4 Sub-Processors supported */
 
 /* Option Vector 6: IBM PAPR hints */
 #define OV6_LINUX		0x02	/* Linux is our OS */

@@ -719,6 +721,8 @@ static unsigned char ibm_architecture_vec[] = {
 	W(0xfffe0000), W(0x003a0000),	/* POWER5/POWER5+ */
 	W(0xffff0000), W(0x003e0000),	/* POWER6 */
 	W(0xffff0000), W(0x003f0000),	/* POWER7 */
+	W(0xffff0000), W(0x004b0000),	/* POWER8 */
+	W(0xffffffff), W(0x0f000004),	/* all 2.07-compliant */
 	W(0xffffffff), W(0x0f000003),	/* all 2.06-compliant */
 	W(0xffffffff), W(0x0f000002),	/* all 2.05-compliant */
 	W(0xfffffffe), W(0x0f000001),	/* all 2.04-compliant and earlier */

@@ -728,7 +732,7 @@ static unsigned char ibm_architecture_vec[] = {
 	3 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
-	OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06,
+	OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06 | OV1_PPC_2_07,
 
 	/* option vector 2: Open Firmware options supported */
 	34 - 2,				/* length */

@@ -755,7 +759,7 @@ static unsigned char ibm_architecture_vec[] = {
 	OV4_MIN_ENT_CAP,		/* minimum VP entitled capacity */
 
 	/* option vector 5: PAPR/OF options */
-	18 - 2,				/* length */
+	19 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
 	OV5_DONATE_DEDICATE_CPU | OV5_MSI,

@@ -776,6 +780,7 @@ static unsigned char ibm_architecture_vec[] = {
 	0,
 	0,
 	OV5_PFO_HW_RNG | OV5_PFO_HW_ENCR | OV5_PFO_HW_842,
+	OV5_SUB_PROCESSORS,
 	/* option vector 6: IBM PAPR hints */
 	4 - 2,				/* length */
 	0,

-- 
1.7.9.5

[PATCH] powerpc: Add POWER8 architected mode to cputable

From: Michael Neuling <hidden>
Date: 2012-11-09 06:26:42

A PVR of 0x0F000004 means we are arch v2.07 complicate ie, POWER8.
    
Signed-off-by: Michael Neuling <redacted>

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 216ff84..75a3d71 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c

@@ -435,6 +435,21 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_restore		= __restore_cpu_power7,
 		.platform		= "power7",
 	},
+	{	/* 2.07-compliant processor, i.e. Power8 "architected" mode */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x0f000004,
+		.cpu_name		= "POWER8 (architected)",
+		.cpu_features		= CPU_FTRS_POWER8,
+		.cpu_user_features	= COMMON_USER_POWER8,
+		.mmu_features		= MMU_FTRS_POWER8,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
+		.cpu_setup		= __setup_cpu_power8,
+		.cpu_restore		= __restore_cpu_power8,
+		.platform		= "power8",
+	},
 	{	/* Power7 */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x003f0000,

Re: [PATCH] powerpc: Add POWER8 architected mode to cputable

From: Gabriel Paubert <hidden>
Date: 2012-11-09 09:06:45

On Fri, Nov 09, 2012 at 05:26:42PM +1100, Michael Neuling wrote:

A PVR of 0x0F000004 means we are arch v2.07 complicate ie, POWER8.

Huh? 

s/complicate/compliant/ ?

Also ie has to be written with dots (i.e.).

	Gabriel

quoted hunk

    
Signed-off-by: Michael Neuling <redacted>

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 216ff84..75a3d71 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c

@@ -435,6 +435,21 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_restore		= __restore_cpu_power7,
 		.platform		= "power7",
 	},
+	{	/* 2.07-compliant processor, i.e. Power8 "architected" mode */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x0f000004,
+		.cpu_name		= "POWER8 (architected)",
+		.cpu_features		= CPU_FTRS_POWER8,
+		.cpu_user_features	= COMMON_USER_POWER8,
+		.mmu_features		= MMU_FTRS_POWER8,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.oprofile_cpu_type	= "ppc64/ibm-compat-v1",
+		.cpu_setup		= __setup_cpu_power8,
+		.cpu_restore		= __restore_cpu_power8,
+		.platform		= "power8",
+	},
 	{	/* Power7 */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x003f0000,

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Re: [PATCH] powerpc: Add POWER8 architected mode to cputable

From: Michael Neuling <hidden>
Date: 2012-11-09 09:56:21

On Fri, Nov 09, 2012 at 05:26:42PM +1100, Michael Neuling wrote:

quoted

A PVR of 0x0F000004 means we are arch v2.07 complicate ie, POWER8.

Huh? 

s/complicate/compliant/ ?

Yes, compliant.  Thanks

Also ie has to be written with dots (i.e.).

Thanks.

Mikey

[PATCH] powerpc/pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET for POWER8 updates

From: Michael Neuling <hidden>
Date: 2012-11-15 03:53:12

In supporting POWER8 we added 16 bytes to the start of the
ibm_architecture_vec, but forgot to add this to
IBM_ARCH_VEC_NRCORES_OFFSET.

This caused us to hit this warning in early boot:
  WARNING ! ibm_architecture_vec structure inconsistent: 805372128

This add this extra 16 bytes of offset.  

Signed-off-by: Michael Neuling <redacted>

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 9ffb542..779f340 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c

@@ -773,7 +773,7 @@ static unsigned char ibm_architecture_vec[] = {
 	 * must match by the macro below. Update the definition if
 	 * the structure layout changes.
 	 */
-#define IBM_ARCH_VEC_NRCORES_OFFSET	101
+#define IBM_ARCH_VEC_NRCORES_OFFSET	117
 	W(NR_CPUS),			/* number of cores supported */
 	0,
 	0,

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help