[PATCH v2 4/7] powerpc/PCI: convert devtree bus addresses to resource

Subsystems: linux for powerpc (32-bit and 64-bit), the rest

STALE5320d

2 messages, 2 authors, 2012-03-17 · open the first message on its own page

[PATCH v2 4/7] powerpc/PCI: convert devtree bus addresses to resource

From: Bjorn Helgaas <bhelgaas@google.com>
Date: 2012-03-16 23:48:19

Normal PCI enumeration via PCI config space uses __pci_read_base(), where
the PCI core applies any bus-to-resource offset.  But powerpc doesn't use
that path when enumerating via the device tree.

In 6c5705fec63d, I converted powerpc to use the PCI core bus-to-resource
conversion, but I missed these powerpc-specific paths.  Some powerpc
platforms fail to boot ("Cannot allocate resource region," "device not
available," etc.) between that commit and this one.

This adds the corresponding bus-to-resource conversion in the paths that
read BAR values from the OF device tree.

CC: Anton Blanchard <redacted>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 arch/powerpc/kernel/pci_of_scan.c |   12 ++++++++----
 1 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index b37d0b5..89dde17 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c

@@ -75,6 +75,7 @@ static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
 {
 	u64 base, size;
 	unsigned int flags;
+	struct pci_bus_region region;
 	struct resource *res;
 	const u32 *addrs;
 	u32 i;

@@ -106,10 +107,11 @@ static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
 			printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
 			continue;
 		}
-		res->start = base;
-		res->end = base + size - 1;
 		res->flags = flags;
 		res->name = pci_name(dev);
+		region.start = base;
+		region.end = base + size - 1;
+		pcibios_bus_to_resource(dev, res, &region);
 	}
 }

@@ -209,6 +211,7 @@ void __devinit of_scan_pci_bridge(struct pci_dev *dev)
 	struct pci_bus *bus;
 	const u32 *busrange, *ranges;
 	int len, i, mode;
+	struct pci_bus_region region;
 	struct resource *res;
 	unsigned int flags;
 	u64 size;

@@ -270,9 +273,10 @@ void __devinit of_scan_pci_bridge(struct pci_dev *dev)
 			res = bus->resource[i];
 			++i;
 		}
-		res->start = of_read_number(&ranges[1], 2);
-		res->end = res->start + size - 1;
 		res->flags = flags;
+		region.start = of_read_number(&ranges[1], 2);
+		region.end = region.start + size - 1;
+		pcibios_bus_to_resource(dev, res, &region);
 	}
 	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
 		bus->number);

Re: [PATCH v2 4/7] powerpc/PCI: convert devtree bus addresses to resource

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: 2012-03-17 03:33:20

On Fri, 2012-03-16 at 17:48 -0600, Bjorn Helgaas wrote:

Normal PCI enumeration via PCI config space uses __pci_read_base(), where
the PCI core applies any bus-to-resource offset.  But powerpc doesn't use
that path when enumerating via the device tree.

In 6c5705fec63d, I converted powerpc to use the PCI core bus-to-resource
conversion, but I missed these powerpc-specific paths.  Some powerpc
platforms fail to boot ("Cannot allocate resource region," "device not
available," etc.) between that commit and this one.

This adds the corresponding bus-to-resource conversion in the paths that
read BAR values from the OF device tree.

CC: Anton Blanchard <redacted>

Acked-By: Benjamin Herrenschmidt <benh@kernel.crashing.org>

quoted hunk

CC: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 arch/powerpc/kernel/pci_of_scan.c |   12 ++++++++----
 1 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index b37d0b5..89dde17 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c

@@ -75,6 +75,7 @@ static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
 {
 	u64 base, size;
 	unsigned int flags;
+	struct pci_bus_region region;
 	struct resource *res;
 	const u32 *addrs;
 	u32 i;

@@ -106,10 +107,11 @@ static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
 			printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
 			continue;
 		}
-		res->start = base;
-		res->end = base + size - 1;
 		res->flags = flags;
 		res->name = pci_name(dev);
+		region.start = base;
+		region.end = base + size - 1;
+		pcibios_bus_to_resource(dev, res, &region);
 	}
 }

@@ -209,6 +211,7 @@ void __devinit of_scan_pci_bridge(struct pci_dev *dev)
 	struct pci_bus *bus;
 	const u32 *busrange, *ranges;
 	int len, i, mode;
+	struct pci_bus_region region;
 	struct resource *res;
 	unsigned int flags;
 	u64 size;

@@ -270,9 +273,10 @@ void __devinit of_scan_pci_bridge(struct pci_dev *dev)
 			res = bus->resource[i];
 			++i;
 		}
-		res->start = of_read_number(&ranges[1], 2);
-		res->end = res->start + size - 1;
 		res->flags = flags;
+		region.start = of_read_number(&ranges[1], 2);
+		region.end = region.start + size - 1;
+		pcibios_bus_to_resource(dev, res, &region);
 	}
 	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
 		bus->number);

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help